105 lines
3.1 KiB
YAML
105 lines
3.1 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Honeywell mprls0025pa pressure sensor
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Andreas Klinger <ak@it-klinger.de>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
Honeywell pressure sensor of model mprls0025pa.
|
||
|
|
|
||
|
|
This sensor has an I2C and SPI interface. Only the I2C interface is
|
||
|
|
implemented.
|
||
|
|
|
||
|
|
There are many models with different pressure ranges available. The vendor
|
||
|
|
calls them "mpr series". All of them have the identical programming model and
|
||
|
|
differ in the pressure range, unit and transfer function.
|
||
|
|
|
||
|
|
To support different models one need to specify the pressure range as well as
|
||
|
|
the transfer function. Pressure range needs to be converted from its unit to
|
||
|
|
pascal.
|
||
|
|
|
||
|
|
The transfer function defines the ranges of numerical values delivered by the
|
||
|
|
sensor. The minimal range value stands for the minimum pressure and the
|
||
|
|
maximum value also for the maximum pressure with linear relation inside the
|
||
|
|
range.
|
||
|
|
|
||
|
|
Specifications about the devices can be found at:
|
||
|
|
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
|
||
|
|
products/sensors/pressure-sensors/board-mount-pressure-sensors/
|
||
|
|
micropressure-mpr-series/documents/
|
||
|
|
sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: honeywell,mprls0025pa
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
reset-gpios:
|
||
|
|
description:
|
||
|
|
Optional GPIO for resetting the device.
|
||
|
|
If not present the device is not resetted during the probe.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
honeywell,pmin-pascal:
|
||
|
|
description:
|
||
|
|
Minimum pressure value the sensor can measure in pascal.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
honeywell,pmax-pascal:
|
||
|
|
description:
|
||
|
|
Maximum pressure value the sensor can measure in pascal.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
honeywell,transfer-function:
|
||
|
|
description: |
|
||
|
|
Transfer function which defines the range of valid values delivered by the
|
||
|
|
sensor.
|
||
|
|
1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
|
||
|
|
2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
|
||
|
|
3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
vdd-supply:
|
||
|
|
description: provide VDD power to the sensor.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- honeywell,pmin-pascal
|
||
|
|
- honeywell,pmax-pascal
|
||
|
|
- honeywell,transfer-function
|
||
|
|
- vdd-supply
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
pressure@18 {
|
||
|
|
compatible = "honeywell,mprls0025pa";
|
||
|
|
reg = <0x18>;
|
||
|
|
reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
|
||
|
|
interrupt-parent = <&gpio3>;
|
||
|
|
interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
honeywell,pmin-pascal = <0>;
|
||
|
|
honeywell,pmax-pascal = <172369>;
|
||
|
|
honeywell,transfer-function = <1>;
|
||
|
|
vdd-supply = <&vcc_3v3>;
|
||
|
|
};
|
||
|
|
};
|