150 lines
3.7 KiB
YAML
150 lines
3.7 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
%YAML 1.2
|
||
|
---
|
||
|
$id: http://devicetree.org/schemas/mfd/max77650.yaml#
|
||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
||
|
title: MAX77650 ultra low-power PMIC from Maxim Integrated.
|
||
|
|
||
|
maintainers:
|
||
|
- Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
||
|
|
||
|
description: |
|
||
|
MAX77650 is an ultra-low power PMIC providing battery charging and power
|
||
|
supply for low-power IoT and wearable applications.
|
||
|
|
||
|
The GPIO-controller module is represented as part of the top-level PMIC
|
||
|
node. The device exposes a single GPIO line.
|
||
|
|
||
|
For device-tree bindings of other sub-modules (regulator, power supply,
|
||
|
LEDs and onkey) refer to the binding documents under the respective
|
||
|
sub-system directories.
|
||
|
|
||
|
properties:
|
||
|
compatible:
|
||
|
const: maxim,max77650
|
||
|
|
||
|
reg:
|
||
|
description:
|
||
|
I2C device address.
|
||
|
maxItems: 1
|
||
|
|
||
|
interrupts:
|
||
|
maxItems: 1
|
||
|
|
||
|
interrupt-controller: true
|
||
|
|
||
|
"#interrupt-cells":
|
||
|
const: 2
|
||
|
description:
|
||
|
The first cell is the IRQ number, the second cell is the trigger type.
|
||
|
|
||
|
gpio-controller: true
|
||
|
|
||
|
"#gpio-cells":
|
||
|
const: 2
|
||
|
description:
|
||
|
The first cell is the pin number and the second cell is used to specify
|
||
|
the gpio active state.
|
||
|
|
||
|
gpio-line-names:
|
||
|
maxItems: 1
|
||
|
description:
|
||
|
Single string containing the name of the GPIO line.
|
||
|
|
||
|
regulators:
|
||
|
$ref: ../regulator/max77650-regulator.yaml
|
||
|
|
||
|
charger:
|
||
|
$ref: ../power/supply/max77650-charger.yaml
|
||
|
|
||
|
leds:
|
||
|
$ref: ../leds/leds-max77650.yaml
|
||
|
|
||
|
onkey:
|
||
|
$ref: ../input/max77650-onkey.yaml
|
||
|
|
||
|
required:
|
||
|
- compatible
|
||
|
- reg
|
||
|
- interrupts
|
||
|
- interrupt-controller
|
||
|
- "#interrupt-cells"
|
||
|
- gpio-controller
|
||
|
- "#gpio-cells"
|
||
|
|
||
|
additionalProperties: false
|
||
|
|
||
|
examples:
|
||
|
- |
|
||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
#include <dt-bindings/input/linux-event-codes.h>
|
||
|
i2c {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
pmic@48 {
|
||
|
compatible = "maxim,max77650";
|
||
|
reg = <0x48>;
|
||
|
|
||
|
interrupt-controller;
|
||
|
interrupt-parent = <&gpio2>;
|
||
|
#interrupt-cells = <2>;
|
||
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
gpio-line-names = "max77650-charger";
|
||
|
|
||
|
regulators {
|
||
|
compatible = "maxim,max77650-regulator";
|
||
|
|
||
|
max77650_ldo: regulator-ldo {
|
||
|
regulator-name = "max77650-ldo";
|
||
|
regulator-min-microvolt = <1350000>;
|
||
|
regulator-max-microvolt = <2937500>;
|
||
|
};
|
||
|
|
||
|
max77650_sbb0: regulator-sbb0 {
|
||
|
regulator-name = "max77650-sbb0";
|
||
|
regulator-min-microvolt = <800000>;
|
||
|
regulator-max-microvolt = <1587500>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
charger {
|
||
|
compatible = "maxim,max77650-charger";
|
||
|
input-voltage-min-microvolt = <4200000>;
|
||
|
input-current-limit-microamp = <285000>;
|
||
|
};
|
||
|
|
||
|
leds {
|
||
|
compatible = "maxim,max77650-led";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
led@0 {
|
||
|
reg = <0>;
|
||
|
label = "blue:usr0";
|
||
|
};
|
||
|
|
||
|
led@1 {
|
||
|
reg = <1>;
|
||
|
label = "red:usr1";
|
||
|
linux,default-trigger = "heartbeat";
|
||
|
};
|
||
|
|
||
|
led@2 {
|
||
|
reg = <2>;
|
||
|
label = "green:usr2";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
onkey {
|
||
|
compatible = "maxim,max77650-onkey";
|
||
|
linux,code = <KEY_END>;
|
||
|
maxim,onkey-slide;
|
||
|
};
|
||
|
};
|
||
|
};
|