250 lines
10 KiB
YAML
250 lines
10 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Generic OPP (Operating Performance Points) Common Properties
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Viresh Kumar <viresh.kumar@linaro.org>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
Devices work at voltage-current-frequency combinations and some implementations
|
||
|
|
have the liberty of choosing these. These combinations are called Operating
|
||
|
|
Performance Points aka OPPs. This document defines bindings for these OPPs
|
||
|
|
applicable across wide range of devices. For illustration purpose, this document
|
||
|
|
uses CPU as a device.
|
||
|
|
|
||
|
|
This describes the OPPs belonging to a device.
|
||
|
|
|
||
|
|
select: false
|
||
|
|
|
||
|
|
properties:
|
||
|
|
$nodename:
|
||
|
|
pattern: '^opp-table(-[a-z0-9]+)?$'
|
||
|
|
|
||
|
|
opp-shared:
|
||
|
|
description:
|
||
|
|
Indicates that device nodes using this OPP Table Node's phandle switch
|
||
|
|
their DVFS state together, i.e. they share clock/voltage/current lines.
|
||
|
|
Missing property means devices have independent clock/voltage/current
|
||
|
|
lines, but they share OPP tables.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
'^opp(-?[0-9]+)*$':
|
||
|
|
type: object
|
||
|
|
description:
|
||
|
|
One or more OPP nodes describing voltage-current-frequency combinations.
|
||
|
|
Their name isn't significant but their phandle can be used to reference an
|
||
|
|
OPP. These are mandatory except for the case where the OPP table is
|
||
|
|
present only to indicate dependency between devices using the opp-shared
|
||
|
|
property.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
opp-hz:
|
||
|
|
description:
|
||
|
|
Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
|
||
|
|
required property for all device nodes, unless another "required"
|
||
|
|
property to uniquely identify the OPP nodes exists. Devices like power
|
||
|
|
domains must have another (implementation dependent) property.
|
||
|
|
|
||
|
|
Entries for multiple clocks shall be provided in the same field, as
|
||
|
|
array of frequencies. The OPP binding doesn't provide any provisions
|
||
|
|
to relate the values to their clocks or the order in which the clocks
|
||
|
|
need to be configured and that is left for the implementation
|
||
|
|
specific binding.
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 16
|
||
|
|
items:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
opp-microvolt:
|
||
|
|
description: |
|
||
|
|
Voltage for the OPP
|
||
|
|
|
||
|
|
A single regulator's voltage is specified with an array of size one or three.
|
||
|
|
Single entry is for target voltage and three entries are for <target min max>
|
||
|
|
voltages.
|
||
|
|
|
||
|
|
Entries for multiple regulators shall be provided in the same field separated
|
||
|
|
by angular brackets <>. The OPP binding doesn't provide any provisions to
|
||
|
|
relate the values to their power supplies or the order in which the supplies
|
||
|
|
need to be configured and that is left for the implementation specific
|
||
|
|
binding.
|
||
|
|
|
||
|
|
Entries for all regulators shall be of the same size, i.e. either all use a
|
||
|
|
single value or triplets.
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8 # Should be enough regulators
|
||
|
|
items:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 3
|
||
|
|
|
||
|
|
opp-microamp:
|
||
|
|
description: |
|
||
|
|
The maximum current drawn by the device in microamperes considering
|
||
|
|
system specific parameters (such as transients, process, aging,
|
||
|
|
maximum operating temperature range etc.) as necessary. This may be
|
||
|
|
used to set the most efficient regulator operating mode.
|
||
|
|
|
||
|
|
Should only be set if opp-microvolt or opp-microvolt-<name> is set for
|
||
|
|
the OPP.
|
||
|
|
|
||
|
|
Entries for multiple regulators shall be provided in the same field
|
||
|
|
separated by angular brackets <>. If current values aren't required
|
||
|
|
for a regulator, then it shall be filled with 0. If current values
|
||
|
|
aren't required for any of the regulators, then this field is not
|
||
|
|
required. The OPP binding doesn't provide any provisions to relate the
|
||
|
|
values to their power supplies or the order in which the supplies need
|
||
|
|
to be configured and that is left for the implementation specific
|
||
|
|
binding.
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8 # Should be enough regulators
|
||
|
|
|
||
|
|
opp-microwatt:
|
||
|
|
description: |
|
||
|
|
The power for the OPP in micro-Watts.
|
||
|
|
|
||
|
|
Entries for multiple regulators shall be provided in the same field
|
||
|
|
separated by angular brackets <>. If power values aren't required
|
||
|
|
for a regulator, then it shall be filled with 0. If power values
|
||
|
|
aren't required for any of the regulators, then this field is not
|
||
|
|
required. The OPP binding doesn't provide any provisions to relate the
|
||
|
|
values to their power supplies or the order in which the supplies need
|
||
|
|
to be configured and that is left for the implementation specific
|
||
|
|
binding.
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8 # Should be enough regulators
|
||
|
|
|
||
|
|
opp-level:
|
||
|
|
description:
|
||
|
|
A value representing the performance level of the device.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
opp-peak-kBps:
|
||
|
|
description:
|
||
|
|
Peak bandwidth in kilobytes per second, expressed as an array of
|
||
|
|
32-bit big-endian integers. Each element of the array represents the
|
||
|
|
peak bandwidth value of each interconnect path. The number of elements
|
||
|
|
should match the number of interconnect paths.
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 32 # Should be enough
|
||
|
|
|
||
|
|
opp-avg-kBps:
|
||
|
|
description:
|
||
|
|
Average bandwidth in kilobytes per second, expressed as an array
|
||
|
|
of 32-bit big-endian integers. Each element of the array represents the
|
||
|
|
average bandwidth value of each interconnect path. The number of elements
|
||
|
|
should match the number of interconnect paths. This property is only
|
||
|
|
meaningful in OPP tables where opp-peak-kBps is present.
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 32 # Should be enough
|
||
|
|
|
||
|
|
clock-latency-ns:
|
||
|
|
description:
|
||
|
|
Specifies the maximum possible transition latency (in nanoseconds) for
|
||
|
|
switching to this OPP from any other OPP.
|
||
|
|
|
||
|
|
turbo-mode:
|
||
|
|
description:
|
||
|
|
Marks the OPP to be used only for turbo modes. Turbo mode is available
|
||
|
|
on some platforms, where the device can run over its operating
|
||
|
|
frequency for a short duration of time limited by the device's power,
|
||
|
|
current and thermal limits.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
opp-suspend:
|
||
|
|
description:
|
||
|
|
Marks the OPP to be used during device suspend. If multiple OPPs in
|
||
|
|
the table have this, the OPP with highest opp-hz will be used.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
opp-supported-hw:
|
||
|
|
description: |
|
||
|
|
This property allows a platform to enable only a subset of the OPPs
|
||
|
|
from the larger set present in the OPP table, based on the current
|
||
|
|
version of the hardware (already known to the operating system).
|
||
|
|
|
||
|
|
Each block present in the array of blocks in this property, represents
|
||
|
|
a sub-group of hardware versions supported by the OPP. i.e. <sub-group
|
||
|
|
A>, <sub-group B>, etc. The OPP will be enabled if _any_ of these
|
||
|
|
sub-groups match the hardware's version.
|
||
|
|
|
||
|
|
Each sub-group is a platform defined array representing the hierarchy
|
||
|
|
of hardware versions supported by the platform. For a platform with
|
||
|
|
three hierarchical levels of version (X.Y.Z), this field shall look
|
||
|
|
like
|
||
|
|
|
||
|
|
opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
|
||
|
|
|
||
|
|
Each level (eg. X1) in version hierarchy is represented by a 32 bit
|
||
|
|
value, one bit per version and so there can be maximum 32 versions per
|
||
|
|
level. Logical AND (&) operation is performed for each level with the
|
||
|
|
hardware's level version and a non-zero output for _all_ the levels in
|
||
|
|
a sub-group means the OPP is supported by hardware. A value of
|
||
|
|
0xFFFFFFFF for each level in the sub-group will enable the OPP for all
|
||
|
|
versions for the hardware.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-matrix
|
||
|
|
maxItems: 32
|
||
|
|
items:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 4
|
||
|
|
|
||
|
|
required-opps:
|
||
|
|
description:
|
||
|
|
This contains phandle to an OPP node in another device's OPP table. It
|
||
|
|
may contain an array of phandles, where each phandle points to an OPP
|
||
|
|
of a different device. It should not contain multiple phandles to the
|
||
|
|
OPP nodes in the same OPP table. This specifies the minimum required
|
||
|
|
OPP of the device(s), whose OPP's phandle is present in this property,
|
||
|
|
for the functioning of the current device at the current OPP (where
|
||
|
|
this property is present).
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||
|
|
items:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
'^opp-microvolt-':
|
||
|
|
description:
|
||
|
|
Named opp-microvolt property. This is exactly similar to the above
|
||
|
|
opp-microvolt property, but allows multiple voltage ranges to be
|
||
|
|
provided for the same OPP. At runtime, the platform can pick a <name>
|
||
|
|
and matching opp-microvolt-<name> property will be enabled for all
|
||
|
|
OPPs. If the platform doesn't pick a specific <name> or the <name>
|
||
|
|
doesn't match with any opp-microvolt-<name> properties, then
|
||
|
|
opp-microvolt property shall be used, if present.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-matrix
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8 # Should be enough regulators
|
||
|
|
items:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 3
|
||
|
|
|
||
|
|
'^opp-microamp-':
|
||
|
|
description:
|
||
|
|
Named opp-microamp property. Similar to opp-microvolt-<name> property,
|
||
|
|
but for microamp instead.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8 # Should be enough regulators
|
||
|
|
|
||
|
|
'^opp-microwatt-':
|
||
|
|
description:
|
||
|
|
Named opp-microwatt property. Similar to opp-microamp-<name> property,
|
||
|
|
but for microwatt instead.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 8 # Should be enough regulators
|
||
|
|
|
||
|
|
dependencies:
|
||
|
|
opp-avg-kBps: [ opp-peak-kBps ]
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
|
||
|
|
additionalProperties: true
|
||
|
|
|
||
|
|
...
|