104 lines
2.3 KiB
YAML
104 lines
2.3 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Common PHY and network PCS transmit amplitude property
|
||
|
|
|
||
|
|
description:
|
||
|
|
Binding describing the peak-to-peak transmit amplitude for common PHYs
|
||
|
|
and network PCSes.
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Marek Behún <kabel@kernel.org>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
tx-p2p-microvolt:
|
||
|
|
description:
|
||
|
|
Transmit amplitude voltages in microvolts, peak-to-peak. If this property
|
||
|
|
contains multiple values for various PHY modes, the
|
||
|
|
'tx-p2p-microvolt-names' property must be provided and contain
|
||
|
|
corresponding mode names.
|
||
|
|
|
||
|
|
tx-p2p-microvolt-names:
|
||
|
|
description: |
|
||
|
|
Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
|
||
|
|
property. Required only if multiple voltages are provided.
|
||
|
|
|
||
|
|
If a value of 'default' is provided, the system should use it for any PHY
|
||
|
|
mode that is otherwise not defined here. If 'default' is not provided, the
|
||
|
|
system should use manufacturer default value.
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 16
|
||
|
|
items:
|
||
|
|
enum:
|
||
|
|
- default
|
||
|
|
|
||
|
|
# ethernet modes
|
||
|
|
- sgmii
|
||
|
|
- qsgmii
|
||
|
|
- xgmii
|
||
|
|
- 1000base-x
|
||
|
|
- 2500base-x
|
||
|
|
- 5gbase-r
|
||
|
|
- rxaui
|
||
|
|
- xaui
|
||
|
|
- 10gbase-kr
|
||
|
|
- usxgmii
|
||
|
|
- 10gbase-r
|
||
|
|
- 25gbase-r
|
||
|
|
|
||
|
|
# PCIe modes
|
||
|
|
- pcie
|
||
|
|
- pcie1
|
||
|
|
- pcie2
|
||
|
|
- pcie3
|
||
|
|
- pcie4
|
||
|
|
- pcie5
|
||
|
|
- pcie6
|
||
|
|
|
||
|
|
# USB modes
|
||
|
|
- usb
|
||
|
|
- usb-ls
|
||
|
|
- usb-fs
|
||
|
|
- usb-hs
|
||
|
|
- usb-ss
|
||
|
|
- usb-ss+
|
||
|
|
- usb-4
|
||
|
|
|
||
|
|
# storage modes
|
||
|
|
- sata
|
||
|
|
- ufs-hs
|
||
|
|
- ufs-hs-a
|
||
|
|
- ufs-hs-b
|
||
|
|
|
||
|
|
# display modes
|
||
|
|
- lvds
|
||
|
|
- dp
|
||
|
|
- dp-rbr
|
||
|
|
- dp-hbr
|
||
|
|
- dp-hbr2
|
||
|
|
- dp-hbr3
|
||
|
|
- dp-uhbr-10
|
||
|
|
- dp-uhbr-13.5
|
||
|
|
- dp-uhbr-20
|
||
|
|
|
||
|
|
# camera modes
|
||
|
|
- mipi-dphy
|
||
|
|
- mipi-dphy-univ
|
||
|
|
- mipi-dphy-v2.5-univ
|
||
|
|
|
||
|
|
dependencies:
|
||
|
|
tx-p2p-microvolt-names: [ tx-p2p-microvolt ]
|
||
|
|
|
||
|
|
additionalProperties: true
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
phy: phy {
|
||
|
|
#phy-cells = <1>;
|
||
|
|
tx-p2p-microvolt = <915000>, <1100000>, <1200000>;
|
||
|
|
tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss";
|
||
|
|
};
|