265 lines
6.9 KiB
YAML
265 lines
6.9 KiB
YAML
|
# Copyright 2020 Lubomir Rintel <lkundrak@v3.sk>
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/serial/8250.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: UART (Universal Asynchronous Receiver/Transmitter)
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- devicetree@vger.kernel.org
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: serial.yaml#
|
||
|
|
- $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
|
||
|
|
- if:
|
||
|
|
anyOf:
|
||
|
|
- required:
|
||
|
|
- aspeed,lpc-io-reg
|
||
|
|
- required:
|
||
|
|
- aspeed,lpc-interrupts
|
||
|
|
- required:
|
||
|
|
- aspeed,sirq-polarity-sense
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: aspeed,ast2500-vuart
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: mrvl,mmp-uart
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
reg-shift:
|
||
|
|
const: 2
|
||
|
|
required:
|
||
|
|
- reg-shift
|
||
|
|
- if:
|
||
|
|
not:
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
items:
|
||
|
|
- enum:
|
||
|
|
- ns8250
|
||
|
|
- ns16450
|
||
|
|
- ns16550
|
||
|
|
- ns16550a
|
||
|
|
then:
|
||
|
|
anyOf:
|
||
|
|
- required: [ clock-frequency ]
|
||
|
|
- required: [ clocks ]
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
oneOf:
|
||
|
|
- const: ns8250
|
||
|
|
- const: ns16450
|
||
|
|
- const: ns16550
|
||
|
|
- const: ns16550a
|
||
|
|
- const: ns16850
|
||
|
|
- const: aspeed,ast2400-vuart
|
||
|
|
- const: aspeed,ast2500-vuart
|
||
|
|
- const: intel,xscale-uart
|
||
|
|
- const: mrvl,pxa-uart
|
||
|
|
- const: nuvoton,wpcm450-uart
|
||
|
|
- const: nuvoton,npcm750-uart
|
||
|
|
- const: nvidia,tegra20-uart
|
||
|
|
- const: nxp,lpc3220-uart
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- exar,xr16l2552
|
||
|
|
- exar,xr16l2551
|
||
|
|
- exar,xr16l2550
|
||
|
|
- const: ns8250
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- altr,16550-FIFO32
|
||
|
|
- altr,16550-FIFO64
|
||
|
|
- altr,16550-FIFO128
|
||
|
|
- fsl,16550-FIFO64
|
||
|
|
- fsl,ns16550
|
||
|
|
- andestech,uart16550
|
||
|
|
- nxp,lpc1850-uart
|
||
|
|
- opencores,uart16550-rtlsvn105
|
||
|
|
- ti,da830-uart
|
||
|
|
- const: ns16550a
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- ns16750
|
||
|
|
- cavium,octeon-3860-uart
|
||
|
|
- xlnx,xps-uart16550-2.00.b
|
||
|
|
- ralink,rt2880-uart
|
||
|
|
- enum:
|
||
|
|
- ns16550 # Deprecated, unless the FIFO really is broken
|
||
|
|
- ns16550a
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- nuvoton,npcm845-uart
|
||
|
|
- const: nuvoton,npcm750-uart
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- ralink,mt7620a-uart
|
||
|
|
- ralink,rt3052-uart
|
||
|
|
- ralink,rt3883-uart
|
||
|
|
- const: ralink,rt2880-uart
|
||
|
|
- enum:
|
||
|
|
- ns16550 # Deprecated, unless the FIFO really is broken
|
||
|
|
- ns16550a
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- mediatek,mt7622-btif
|
||
|
|
- mediatek,mt7623-btif
|
||
|
|
- const: mediatek,mtk-btif
|
||
|
|
- items:
|
||
|
|
- const: mrvl,mmp-uart
|
||
|
|
- const: intel,xscale-uart
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- nvidia,tegra30-uart
|
||
|
|
- nvidia,tegra114-uart
|
||
|
|
- nvidia,tegra124-uart
|
||
|
|
- nvidia,tegra210-uart
|
||
|
|
- nvidia,tegra186-uart
|
||
|
|
- nvidia,tegra194-uart
|
||
|
|
- nvidia,tegra234-uart
|
||
|
|
- const: nvidia,tegra20-uart
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clock-frequency: true
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
resets:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
current-speed:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: The current active speed of the UART.
|
||
|
|
|
||
|
|
reg-offset:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Offset to apply to the mapbase from the start of the registers.
|
||
|
|
|
||
|
|
reg-shift:
|
||
|
|
description: Quantity to shift the register offsets by.
|
||
|
|
|
||
|
|
reg-io-width:
|
||
|
|
description: |
|
||
|
|
The size (in bytes) of the IO accesses that should be performed on the
|
||
|
|
device. There are some systems that require 32-bit accesses to the
|
||
|
|
UART (e.g. TI davinci).
|
||
|
|
|
||
|
|
used-by-rtas:
|
||
|
|
type: boolean
|
||
|
|
description: |
|
||
|
|
Set to indicate that the port is in use by the OpenFirmware RTAS and
|
||
|
|
should not be registered.
|
||
|
|
|
||
|
|
no-loopback-test:
|
||
|
|
type: boolean
|
||
|
|
description: |
|
||
|
|
Set to indicate that the port does not implement loopback test mode.
|
||
|
|
|
||
|
|
fifo-size:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: The fifo size of the UART.
|
||
|
|
|
||
|
|
auto-flow-control:
|
||
|
|
type: boolean
|
||
|
|
description: |
|
||
|
|
One way to enable automatic flow control support. The driver is
|
||
|
|
allowed to detect support for the capability even without this
|
||
|
|
property.
|
||
|
|
|
||
|
|
tx-threshold:
|
||
|
|
description: |
|
||
|
|
Specify the TX FIFO low water indication for parts with programmable
|
||
|
|
TX FIFO thresholds.
|
||
|
|
|
||
|
|
overrun-throttle-ms:
|
||
|
|
description: |
|
||
|
|
How long to pause uart rx when input overrun is encountered.
|
||
|
|
|
||
|
|
rts-gpios: true
|
||
|
|
cts-gpios: true
|
||
|
|
dtr-gpios: true
|
||
|
|
dsr-gpios: true
|
||
|
|
rng-gpios: true
|
||
|
|
dcd-gpios: true
|
||
|
|
|
||
|
|
aspeed,sirq-polarity-sense:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||
|
|
description: |
|
||
|
|
Phandle to aspeed,ast2500-scu compatible syscon alongside register
|
||
|
|
offset and bit number to identify how the SIRQ polarity should be
|
||
|
|
configured. One possible data source is the LPC/eSPI mode bit. Only
|
||
|
|
applicable to aspeed,ast2500-vuart.
|
||
|
|
deprecated: true
|
||
|
|
|
||
|
|
aspeed,lpc-io-reg:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
maxItems: 1
|
||
|
|
description: |
|
||
|
|
The VUART LPC address. Only applicable to aspeed,ast2500-vuart.
|
||
|
|
|
||
|
|
aspeed,lpc-interrupts:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 2
|
||
|
|
maxItems: 2
|
||
|
|
description: |
|
||
|
|
A 2-cell property describing the VUART SIRQ number and SIRQ
|
||
|
|
polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only
|
||
|
|
applicable to aspeed,ast2500-vuart.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- reg
|
||
|
|
- interrupts
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
serial@80230000 {
|
||
|
|
compatible = "ns8250";
|
||
|
|
reg = <0x80230000 0x100>;
|
||
|
|
interrupts = <10>;
|
||
|
|
reg-shift = <2>;
|
||
|
|
clock-frequency = <48000000>;
|
||
|
|
};
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
serial@49042000 {
|
||
|
|
compatible = "andestech,uart16550", "ns16550a";
|
||
|
|
reg = <0x49042000 0x400>;
|
||
|
|
interrupts = <80>;
|
||
|
|
clock-frequency = <48000000>;
|
||
|
|
cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
|
||
|
|
rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
|
||
|
|
dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||
|
|
dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
||
|
|
dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||
|
|
rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/clock/aspeed-clock.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
serial@1e787000 {
|
||
|
|
compatible = "aspeed,ast2500-vuart";
|
||
|
|
reg = <0x1e787000 0x40>;
|
||
|
|
reg-shift = <2>;
|
||
|
|
interrupts = <8>;
|
||
|
|
clocks = <&syscon ASPEED_CLK_APB>;
|
||
|
|
no-loopback-test;
|
||
|
|
aspeed,lpc-io-reg = <0x3f8>;
|
||
|
|
aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
...
|