892 lines
17 KiB
Plaintext
892 lines
17 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
|
/*
|
||
|
|
* Google Gru-scarlet board device tree source
|
||
|
|
*
|
||
|
|
* Copyright 2018 Google, Inc
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "rk3399-gru.dtsi"
|
||
|
|
|
||
|
|
/{
|
||
|
|
chassis-type = "tablet";
|
||
|
|
|
||
|
|
/* Power tree */
|
||
|
|
|
||
|
|
/* ppvar_sys children, sorted by name */
|
||
|
|
pp1250_s3: pp1250-s3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "pp1250_s3";
|
||
|
|
|
||
|
|
/* EC turns on w/ pp1250_s3_en; always on for AP */
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1250000>;
|
||
|
|
regulator-max-microvolt = <1250000>;
|
||
|
|
|
||
|
|
vin-supply = <&ppvar_sys>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pp1250_cam: pp1250-dvdd {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "pp1250_dvdd";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pp1250_cam_en>;
|
||
|
|
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
/* 740us delay from gpio output high to pp1250 stable,
|
||
|
|
* rounding up to 1ms for safety.
|
||
|
|
*/
|
||
|
|
startup-delay-us = <1000>;
|
||
|
|
vin-supply = <&pp1250_s3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pp900_s0: pp900-s0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "pp900_s0";
|
||
|
|
|
||
|
|
/* EC turns on w/ pp900_s0_en; always on for AP */
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <900000>;
|
||
|
|
|
||
|
|
vin-supply = <&ppvar_sys>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ppvarn_lcd: ppvarn-lcd {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "ppvarn_lcd";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&ppvarn_lcd_en>;
|
||
|
|
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
||
|
|
vin-supply = <&ppvar_sys>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ppvarp_lcd: ppvarp-lcd {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "ppvarp_lcd";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&ppvarp_lcd_en>;
|
||
|
|
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
|
||
|
|
vin-supply = <&ppvar_sys>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* pp1800 children, sorted by name */
|
||
|
|
pp900_s3: pp900-s3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "pp900_s3";
|
||
|
|
|
||
|
|
/* EC turns on w/ pp900_s3_en; always on for AP */
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <900000>;
|
||
|
|
|
||
|
|
vin-supply = <&pp1800>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* EC turns on pp1800_s3_en */
|
||
|
|
pp1800_s3: pp1800 {
|
||
|
|
};
|
||
|
|
|
||
|
|
/* pp3300 children, sorted by name */
|
||
|
|
pp2800_cam: pp2800-avdd {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "pp2800_avdd";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pp2800_cam_en>;
|
||
|
|
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
|
||
|
|
startup-delay-us = <100>;
|
||
|
|
vin-supply = <&pp3300>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* EC turns on pp3300_s0_en */
|
||
|
|
pp3300_s0: pp3300 {
|
||
|
|
};
|
||
|
|
|
||
|
|
/* EC turns on pp3300_s3_en */
|
||
|
|
pp3300_s3: pp3300 {
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* See b/66922012
|
||
|
|
*
|
||
|
|
* This is a hack to make sure the Bluetooth part of the QCA6174A
|
||
|
|
* is reset at boot by toggling BT_EN. At boot BT_EN is first set
|
||
|
|
* to low when the bt_3v3 regulator is registered (in disabled
|
||
|
|
* state). The fake regulator is configured as a supply of the
|
||
|
|
* wlan_3v3 regulator below. When wlan_3v3 is enabled early in
|
||
|
|
* the boot process it also enables its supply regulator bt_3v3,
|
||
|
|
* which changes BT_EN to high.
|
||
|
|
*/
|
||
|
|
bt_3v3: bt-3v3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "bt_3v3";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&bt_en_1v8_l>;
|
||
|
|
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||
|
|
vin-supply = <&pp3300_s3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wlan_3v3: wlan-3v3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "wlan_3v3";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&wlan_pd_1v8_l>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The WL_EN pin is driven low when the regulator is
|
||
|
|
* registered, and transitions to high when the PCIe bus
|
||
|
|
* is powered up.
|
||
|
|
*/
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Require minimum 10ms from power-on (e.g., PD#) to init PCIe.
|
||
|
|
* TODO (b/64444991): how long to assert PD#?
|
||
|
|
*/
|
||
|
|
regulator-enable-ramp-delay = <10000>;
|
||
|
|
/* See bt_3v3 hack above */
|
||
|
|
vin-supply = <&bt_3v3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
backlight: backlight {
|
||
|
|
compatible = "pwm-backlight";
|
||
|
|
enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&bl_en>;
|
||
|
|
pwms = <&pwm1 0 1000000 0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dmic: dmic {
|
||
|
|
compatible = "dmic-codec";
|
||
|
|
dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&dmic_en>;
|
||
|
|
wakeup-delay-ms = <250>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_keys: gpio-keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pen_eject_odl>;
|
||
|
|
|
||
|
|
switch-pen-insert {
|
||
|
|
label = "Pen Insert";
|
||
|
|
/* Insert = low, eject = high */
|
||
|
|
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,code = <SW_PEN_INSERTED>;
|
||
|
|
linux,input-type = <EV_SW>;
|
||
|
|
wakeup-source;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* pp900_s0 aliases */
|
||
|
|
pp900_ddrpll_ap: &pp900_s0 {
|
||
|
|
};
|
||
|
|
pp900_pcie: &pp900_s0 {
|
||
|
|
};
|
||
|
|
pp900_usb: &pp900_s0 {
|
||
|
|
};
|
||
|
|
|
||
|
|
/* pp900_s3 aliases */
|
||
|
|
pp900_emmcpll: &pp900_s3 {
|
||
|
|
};
|
||
|
|
|
||
|
|
/* EC turns on; alias for pp1800_s0 */
|
||
|
|
pp1800_pcie: &pp1800_s0 {
|
||
|
|
};
|
||
|
|
|
||
|
|
/* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */
|
||
|
|
&ppvar_bigcpu {
|
||
|
|
ctrl-voltage-range = <800074 1299226>;
|
||
|
|
regulator-min-microvolt = <800074>;
|
||
|
|
regulator-max-microvolt = <1299226>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ppvar_bigcpu_pwm {
|
||
|
|
/* On scarlet ppvar big cpu use pwm3 */
|
||
|
|
pwms = <&pwm3 0 3337 0>;
|
||
|
|
regulator-min-microvolt = <800074>;
|
||
|
|
regulator-max-microvolt = <1299226>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ppvar_litcpu {
|
||
|
|
ctrl-voltage-range = <802122 1199620>;
|
||
|
|
regulator-min-microvolt = <802122>;
|
||
|
|
regulator-max-microvolt = <1199620>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ppvar_litcpu_pwm {
|
||
|
|
regulator-min-microvolt = <802122>;
|
||
|
|
regulator-max-microvolt = <1199620>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ppvar_gpu {
|
||
|
|
ctrl-voltage-range = <799600 1099600>;
|
||
|
|
regulator-min-microvolt = <799600>;
|
||
|
|
regulator-max-microvolt = <1099600>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ppvar_gpu_pwm {
|
||
|
|
regulator-min-microvolt = <799600>;
|
||
|
|
regulator-max-microvolt = <1099600>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ppvar_sd_card_io {
|
||
|
|
states = <1800000 0x0>, <3300000 0x1>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pp3000_sd_slot {
|
||
|
|
vin-supply = <&pp3300>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ap_i2c_dig: &i2c2 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
/* These are relatively safe rise/fall times. */
|
||
|
|
i2c-scl-falling-time-ns = <50>;
|
||
|
|
i2c-scl-rising-time-ns = <300>;
|
||
|
|
|
||
|
|
digitizer: digitizer@9 {
|
||
|
|
compatible = "hid-over-i2c";
|
||
|
|
reg = <0x9>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
hid-descr-addr = <0x1>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pen_int_odl &pen_reset_l>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ap_i2c_ts {
|
||
|
|
touchscreen: touchscreen@10 {
|
||
|
|
compatible = "elan,ekth3500";
|
||
|
|
reg = <0x10>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&touch_int_l &touch_reset_l>;
|
||
|
|
reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
camera: &i2c7 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
/* These are relatively safe rise/fall times; TODO: measure */
|
||
|
|
i2c-scl-falling-time-ns = <50>;
|
||
|
|
i2c-scl-rising-time-ns = <300>;
|
||
|
|
|
||
|
|
/* 24M mclk is shared between world and user cameras */
|
||
|
|
pinctrl-0 = <&i2c7_xfer &test_clkout1>;
|
||
|
|
|
||
|
|
/* Rear-facing camera */
|
||
|
|
wcam: camera@36 {
|
||
|
|
compatible = "ovti,ov5695";
|
||
|
|
reg = <0x36>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&wcam_rst>;
|
||
|
|
|
||
|
|
clocks = <&cru SCLK_TESTCLKOUT1>;
|
||
|
|
clock-names = "xvclk";
|
||
|
|
|
||
|
|
avdd-supply = <&pp2800_cam>;
|
||
|
|
dvdd-supply = <&pp1250_cam>;
|
||
|
|
dovdd-supply = <&pp1800_s0>;
|
||
|
|
reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
wcam_out: endpoint {
|
||
|
|
remote-endpoint = <&mipi_in_wcam>;
|
||
|
|
data-lanes = <1 2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Front-facing camera */
|
||
|
|
ucam: camera@3c {
|
||
|
|
compatible = "ovti,ov2685";
|
||
|
|
reg = <0x3c>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&ucam_rst>;
|
||
|
|
|
||
|
|
clocks = <&cru SCLK_TESTCLKOUT1>;
|
||
|
|
clock-names = "xvclk";
|
||
|
|
|
||
|
|
avdd-supply = <&pp2800_cam>;
|
||
|
|
dovdd-supply = <&pp1800_s0>;
|
||
|
|
dvdd-supply = <&pp1800_s0>;
|
||
|
|
reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
ucam_out: endpoint {
|
||
|
|
remote-endpoint = <&mipi_in_ucam>;
|
||
|
|
data-lanes = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cdn_dp {
|
||
|
|
extcon = <&usbc_extcon0>;
|
||
|
|
phys = <&tcphy0_dp>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_alert0 {
|
||
|
|
temperature = <66000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_alert1 {
|
||
|
|
temperature = <71000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cros_ec {
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cru {
|
||
|
|
assigned-clocks =
|
||
|
|
<&cru PLL_GPLL>, <&cru PLL_CPLL>,
|
||
|
|
<&cru PLL_NPLL>,
|
||
|
|
<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
|
||
|
|
<&cru PCLK_PERIHP>,
|
||
|
|
<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
|
||
|
|
<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
|
||
|
|
<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
|
||
|
|
<&cru ACLK_VIO>,
|
||
|
|
<&cru ACLK_GIC_PRE>,
|
||
|
|
<&cru PCLK_DDR>,
|
||
|
|
<&cru ACLK_HDCP>,
|
||
|
|
<&cru ACLK_VDU>;
|
||
|
|
assigned-clock-rates =
|
||
|
|
<600000000>, <1600000000>,
|
||
|
|
<1000000000>,
|
||
|
|
<150000000>, <75000000>,
|
||
|
|
<37500000>,
|
||
|
|
<100000000>, <100000000>,
|
||
|
|
<50000000>, <800000000>,
|
||
|
|
<100000000>, <50000000>,
|
||
|
|
<400000000>,
|
||
|
|
<200000000>,
|
||
|
|
<200000000>,
|
||
|
|
<400000000>,
|
||
|
|
<400000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* The center supply is fixed to .9V on scarlet */
|
||
|
|
&dmc {
|
||
|
|
center-supply = <&pp900_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* We don't need .925 V for 928 MHz on scarlet */
|
||
|
|
&dmc_opp_table {
|
||
|
|
opp03 {
|
||
|
|
opp-microvolt = <900000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpio0 {
|
||
|
|
gpio-line-names = /* GPIO0 A 0-7 */
|
||
|
|
"CLK_32K_AP",
|
||
|
|
"EC_IN_RW_OD",
|
||
|
|
"SPK_PA_EN",
|
||
|
|
"WLAN_PERST_1V8_L",
|
||
|
|
"WLAN_PD_1V8_L",
|
||
|
|
"WLAN_RF_KILL_1V8_L",
|
||
|
|
"BIGCPU_DVS_PWM",
|
||
|
|
"SD_CD_L_JTAG_EN",
|
||
|
|
|
||
|
|
/* GPIO0 B 0-5 */
|
||
|
|
"BT_EN_BT_RF_KILL_1V8_L",
|
||
|
|
"PMUIO2_33_18_L_PP3300_S0_EN",
|
||
|
|
"TOUCH_RESET_L",
|
||
|
|
"AP_EC_WARM_RESET_REQ",
|
||
|
|
"PEN_RESET_L",
|
||
|
|
/*
|
||
|
|
* AP_FLASH_WP_L is crossystem ABI. Schematics call
|
||
|
|
* it AP_FLASH_WP_R_ODL.
|
||
|
|
*/
|
||
|
|
"AP_FLASH_WP_L";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpio1 {
|
||
|
|
gpio-line-names = /* GPIO1 A 0-7 */
|
||
|
|
"PEN_INT_ODL",
|
||
|
|
"PEN_EJECT_ODL",
|
||
|
|
"BT_HOST_WAKE_1V8_L",
|
||
|
|
"WLAN_HOST_WAKE_1V8_L",
|
||
|
|
"TOUCH_INT_ODL",
|
||
|
|
"AP_EC_S3_S0_L",
|
||
|
|
"AP_EC_OVERTEMP",
|
||
|
|
"AP_SPI_FLASH_MISO",
|
||
|
|
|
||
|
|
/* GPIO1 B 0-7 */
|
||
|
|
"AP_SPI_FLASH_MOSI_R",
|
||
|
|
"AP_SPI_FLASH_CLK_R",
|
||
|
|
"AP_SPI_FLASH_CS_L_R",
|
||
|
|
"SD_CARD_DET_ODL",
|
||
|
|
"",
|
||
|
|
"AP_EXPANSION_IO1",
|
||
|
|
"AP_EXPANSION_IO2",
|
||
|
|
"AP_I2C_DISP_SDA",
|
||
|
|
|
||
|
|
/* GPIO1 C 0-7 */
|
||
|
|
"AP_I2C_DISP_SCL",
|
||
|
|
"H1_INT_ODL",
|
||
|
|
"EC_AP_INT_ODL",
|
||
|
|
"LITCPU_DVS_PWM",
|
||
|
|
"AP_I2C_AUDIO_SDA",
|
||
|
|
"AP_I2C_AUDIO_SCL",
|
||
|
|
"AP_EXPANSION_IO3",
|
||
|
|
"HEADSET_INT_ODL",
|
||
|
|
|
||
|
|
/* GPIO1 D0 */
|
||
|
|
"AP_EXPANSION_IO4";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpio2 {
|
||
|
|
gpio-line-names = /* GPIO2 A 0-7 */
|
||
|
|
"AP_I2C_PEN_SDA",
|
||
|
|
"AP_I2C_PEN_SCL",
|
||
|
|
"SD_IO_PWR_EN",
|
||
|
|
"UCAM_RST_L",
|
||
|
|
"PP1250_CAM_EN",
|
||
|
|
"WCAM_RST_L",
|
||
|
|
"AP_EXPANSION_IO5",
|
||
|
|
"AP_I2C_CAM_SDA",
|
||
|
|
|
||
|
|
/* GPIO2 B 0-7 */
|
||
|
|
"AP_I2C_CAM_SCL",
|
||
|
|
"AP_H1_SPI_MISO",
|
||
|
|
"AP_H1_SPI_MOSI",
|
||
|
|
"AP_H1_SPI_CLK",
|
||
|
|
"AP_H1_SPI_CS_L",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
|
||
|
|
/* GPIO2 C 0-7 */
|
||
|
|
"UART_EXPANSION_TX_AP_RX",
|
||
|
|
"UART_AP_TX_EXPANSION_RX",
|
||
|
|
"UART_EXPANSION_RTS_AP_CTS",
|
||
|
|
"UART_AP_RTS_EXPANSION_CTS",
|
||
|
|
"AP_SPI_EC_MISO",
|
||
|
|
"AP_SPI_EC_MOSI",
|
||
|
|
"AP_SPI_EC_CLK",
|
||
|
|
"AP_SPI_EC_CS_L",
|
||
|
|
|
||
|
|
/* GPIO2 D 0-4 */
|
||
|
|
"PP2800_CAM_EN",
|
||
|
|
"CLK_24M_CAM",
|
||
|
|
"WLAN_PCIE_CLKREQ_1V8_L",
|
||
|
|
"",
|
||
|
|
"SD_PWR_3000_1800_L";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpio3 {
|
||
|
|
gpio-line-names = /* GPIO3 A 0-7 */
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
|
||
|
|
/* GPIO3 B 0-7 */
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
|
||
|
|
/* GPIO3 C 0-7 */
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
|
||
|
|
/* GPIO3 D 0-7 */
|
||
|
|
"I2S0_SCLK",
|
||
|
|
"I2S0_LRCK_RX",
|
||
|
|
"I2S0_LRCK_TX",
|
||
|
|
"I2S0_SDI_0",
|
||
|
|
"STRAP_LCDBIAS_L",
|
||
|
|
"STRAP_FEATURE_1",
|
||
|
|
"STRAP_FEATURE_2",
|
||
|
|
"I2S0_SDO_0";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpio4 {
|
||
|
|
gpio-line-names = /* GPIO4 A 0-7 */
|
||
|
|
"I2S_MCLK",
|
||
|
|
"AP_I2C_EXPANSION_SDA",
|
||
|
|
"AP_I2C_EXPANSION_SCL",
|
||
|
|
"DMIC_EN",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
|
||
|
|
/* GPIO4 B 0-7 */
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
"",
|
||
|
|
|
||
|
|
/* GPIO4 C 0-7 */
|
||
|
|
"AP_I2C_TS_SDA",
|
||
|
|
"AP_I2C_TS_SCL",
|
||
|
|
"GPU_DVS_PWM",
|
||
|
|
"UART_DBG_TX_AP_RX",
|
||
|
|
"UART_AP_TX_DBG_RX",
|
||
|
|
"BL_EN",
|
||
|
|
"BL_PWM",
|
||
|
|
"",
|
||
|
|
|
||
|
|
/* GPIO4 D 0-5 */
|
||
|
|
"",
|
||
|
|
"DISPLAY_RST_L",
|
||
|
|
"",
|
||
|
|
"PPVARP_LCD_EN",
|
||
|
|
"PPVARN_LCD_EN",
|
||
|
|
"SD_SLOT_PWR_EN";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c_tunnel {
|
||
|
|
google,remote-bus = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&io_domains {
|
||
|
|
bt656-supply = <&pp1800_s0>; /* APIO2_VDD; 2a 2b */
|
||
|
|
audio-supply = <&pp1800_s0>; /* APIO5_VDD; 3d 4a */
|
||
|
|
gpio1830-supply = <&pp1800_s0>; /* APIO4_VDD; 4c 4d */
|
||
|
|
};
|
||
|
|
|
||
|
|
&isp0 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
ports {
|
||
|
|
port@0 {
|
||
|
|
mipi_in_wcam: endpoint@0 {
|
||
|
|
reg = <0>;
|
||
|
|
remote-endpoint = <&wcam_out>;
|
||
|
|
data-lanes = <1 2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mipi_in_ucam: endpoint@1 {
|
||
|
|
reg = <1>;
|
||
|
|
remote-endpoint = <&ucam_out>;
|
||
|
|
data-lanes = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&isp0_mmu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&max98357a {
|
||
|
|
sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mipi_dphy_rx0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mipi_dsi {
|
||
|
|
status = "okay";
|
||
|
|
clock-master;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
mipi_out: port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
mipi_out_panel: endpoint {
|
||
|
|
remote-endpoint = <&mipi_in_panel>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mipi_panel: panel@0 {
|
||
|
|
/* 2 different panels are used, compatibles are in dts files */
|
||
|
|
reg = <0>;
|
||
|
|
backlight = <&backlight>;
|
||
|
|
enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&display_rst_l>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
mipi_in_panel: endpoint {
|
||
|
|
remote-endpoint = <&mipi_out_panel>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
mipi1_in_panel: endpoint@1 {
|
||
|
|
remote-endpoint = <&mipi1_out_panel>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mipi_dsi1 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
ports {
|
||
|
|
mipi1_out: port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
mipi1_out_panel: endpoint {
|
||
|
|
remote-endpoint = <&mipi1_in_panel>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie0 {
|
||
|
|
ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
/* PERST# asserted in S3 */
|
||
|
|
pcie-reset-suspend = <1>;
|
||
|
|
|
||
|
|
vpcie3v3-supply = <&wlan_3v3>;
|
||
|
|
vpcie1v8-supply = <&pp1800_pcie>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdmmc {
|
||
|
|
cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sound {
|
||
|
|
rockchip,codec = <&max98357a &dmic &codec &cdn_dp>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&spi2 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
cr50@0 {
|
||
|
|
compatible = "google,cr50";
|
||
|
|
reg = <0>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&h1_int_od_l>;
|
||
|
|
spi-max-frequency = <800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_host0_ohci {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
qca_bt: bluetooth@1 {
|
||
|
|
compatible = "usbcf3,e300", "usb4ca,301a";
|
||
|
|
reg = <1>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&bt_host_wake_l>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "wakeup";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* PINCTRL OVERRIDES */
|
||
|
|
&ap_fw_wp {
|
||
|
|
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&bl_en {
|
||
|
|
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&bt_host_wake_l {
|
||
|
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ec_ap_int_l {
|
||
|
|
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&headset_int_l {
|
||
|
|
rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2s0_8ch_bus {
|
||
|
|
rockchip,pins =
|
||
|
|
<3 RK_PD0 1 &pcfg_pull_none_6ma>,
|
||
|
|
<3 RK_PD1 1 &pcfg_pull_none_6ma>,
|
||
|
|
<3 RK_PD2 1 &pcfg_pull_none_6ma>,
|
||
|
|
<3 RK_PD3 1 &pcfg_pull_none_6ma>,
|
||
|
|
<3 RK_PD7 1 &pcfg_pull_none_6ma>,
|
||
|
|
<4 RK_PA0 1 &pcfg_pull_none_6ma>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2s0_8ch_bus_bclk_off {
|
||
|
|
rockchip,pins =
|
||
|
|
<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>,
|
||
|
|
<3 RK_PD1 1 &pcfg_pull_none_6ma>,
|
||
|
|
<3 RK_PD2 1 &pcfg_pull_none_6ma>,
|
||
|
|
<3 RK_PD3 1 &pcfg_pull_none_6ma>,
|
||
|
|
<3 RK_PD7 1 &pcfg_pull_none_6ma>,
|
||
|
|
<4 RK_PA0 1 &pcfg_pull_none_6ma>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* there is no external pull up, so need to set this pin pull up */
|
||
|
|
&sdmmc_cd_pin {
|
||
|
|
rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sd_pwr_1800_sel {
|
||
|
|
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdmode_en {
|
||
|
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&touch_reset_l {
|
||
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&touch_int_l {
|
||
|
|
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pinctrl {
|
||
|
|
pinctrl-0 = <
|
||
|
|
&ap_pwroff /* AP will auto-assert this when in S3 */
|
||
|
|
&clk_32k /* This pin is always 32k on gru boards */
|
||
|
|
&wlan_rf_kill_1v8_l
|
||
|
|
>;
|
||
|
|
|
||
|
|
pcfg_pull_none_6ma: pcfg-pull-none-6ma {
|
||
|
|
bias-disable;
|
||
|
|
drive-strength = <6>;
|
||
|
|
};
|
||
|
|
|
||
|
|
camera {
|
||
|
|
pp1250_cam_en: pp1250-dvdd {
|
||
|
|
rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pp2800_cam_en: pp2800-avdd {
|
||
|
|
rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ucam_rst: ucam_rst {
|
||
|
|
rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wcam_rst: wcam_rst {
|
||
|
|
rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
digitizer {
|
||
|
|
pen_int_odl: pen-int-odl {
|
||
|
|
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pen_reset_l: pen-reset-l {
|
||
|
|
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
discrete-regulators {
|
||
|
|
display_rst_l: display-rst-l {
|
||
|
|
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ppvarp_lcd_en: ppvarp-lcd-en {
|
||
|
|
rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ppvarn_lcd_en: ppvarn-lcd-en {
|
||
|
|
rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
dmic {
|
||
|
|
dmic_en: dmic-en {
|
||
|
|
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pen {
|
||
|
|
pen_eject_odl: pen-eject-odl {
|
||
|
|
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
tpm {
|
||
|
|
h1_int_od_l: h1-int-od-l {
|
||
|
|
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&wifi {
|
||
|
|
bt_en_1v8_l: bt-en-1v8-l {
|
||
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wlan_pd_1v8_l: wlan-pd-1v8-l {
|
||
|
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Default pull-up, but just to be clear */
|
||
|
|
wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l {
|
||
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wifi_perst_l: wifi-perst-l {
|
||
|
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wlan_host_wake_l: wlan-host-wake-l {
|
||
|
|
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
};
|