2023-08-30 17:31:07 +02:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
/*
|
|
|
|
* Mediatek MT7530 DSA Switch driver
|
|
|
|
* Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
|
|
|
|
*/
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <linux/if_bridge.h>
|
|
|
|
#include <linux/iopoll.h>
|
|
|
|
#include <linux/mdio.h>
|
|
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <linux/of_mdio.h>
|
|
|
|
#include <linux/of_net.h>
|
|
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <linux/phylink.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/reset.h>
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
|
|
#include <linux/gpio/driver.h>
|
|
|
|
#include <net/dsa.h>
|
|
|
|
|
|
|
|
#include "mt7530.h"
|
|
|
|
|
|
|
|
static struct mt753x_pcs *pcs_to_mt753x_pcs(struct phylink_pcs *pcs)
|
|
|
|
{
|
|
|
|
return container_of(pcs, struct mt753x_pcs, pcs);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* String, offset, and register size in bytes if different from 4 bytes */
|
|
|
|
static const struct mt7530_mib_desc mt7530_mib[] = {
|
|
|
|
MIB_DESC(1, 0x00, "TxDrop"),
|
|
|
|
MIB_DESC(1, 0x04, "TxCrcErr"),
|
|
|
|
MIB_DESC(1, 0x08, "TxUnicast"),
|
|
|
|
MIB_DESC(1, 0x0c, "TxMulticast"),
|
|
|
|
MIB_DESC(1, 0x10, "TxBroadcast"),
|
|
|
|
MIB_DESC(1, 0x14, "TxCollision"),
|
|
|
|
MIB_DESC(1, 0x18, "TxSingleCollision"),
|
|
|
|
MIB_DESC(1, 0x1c, "TxMultipleCollision"),
|
|
|
|
MIB_DESC(1, 0x20, "TxDeferred"),
|
|
|
|
MIB_DESC(1, 0x24, "TxLateCollision"),
|
|
|
|
MIB_DESC(1, 0x28, "TxExcessiveCollistion"),
|
|
|
|
MIB_DESC(1, 0x2c, "TxPause"),
|
|
|
|
MIB_DESC(1, 0x30, "TxPktSz64"),
|
|
|
|
MIB_DESC(1, 0x34, "TxPktSz65To127"),
|
|
|
|
MIB_DESC(1, 0x38, "TxPktSz128To255"),
|
|
|
|
MIB_DESC(1, 0x3c, "TxPktSz256To511"),
|
|
|
|
MIB_DESC(1, 0x40, "TxPktSz512To1023"),
|
|
|
|
MIB_DESC(1, 0x44, "Tx1024ToMax"),
|
|
|
|
MIB_DESC(2, 0x48, "TxBytes"),
|
|
|
|
MIB_DESC(1, 0x60, "RxDrop"),
|
|
|
|
MIB_DESC(1, 0x64, "RxFiltering"),
|
|
|
|
MIB_DESC(1, 0x68, "RxUnicast"),
|
|
|
|
MIB_DESC(1, 0x6c, "RxMulticast"),
|
|
|
|
MIB_DESC(1, 0x70, "RxBroadcast"),
|
|
|
|
MIB_DESC(1, 0x74, "RxAlignErr"),
|
|
|
|
MIB_DESC(1, 0x78, "RxCrcErr"),
|
|
|
|
MIB_DESC(1, 0x7c, "RxUnderSizeErr"),
|
|
|
|
MIB_DESC(1, 0x80, "RxFragErr"),
|
|
|
|
MIB_DESC(1, 0x84, "RxOverSzErr"),
|
|
|
|
MIB_DESC(1, 0x88, "RxJabberErr"),
|
|
|
|
MIB_DESC(1, 0x8c, "RxPause"),
|
|
|
|
MIB_DESC(1, 0x90, "RxPktSz64"),
|
|
|
|
MIB_DESC(1, 0x94, "RxPktSz65To127"),
|
|
|
|
MIB_DESC(1, 0x98, "RxPktSz128To255"),
|
|
|
|
MIB_DESC(1, 0x9c, "RxPktSz256To511"),
|
|
|
|
MIB_DESC(1, 0xa0, "RxPktSz512To1023"),
|
|
|
|
MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"),
|
|
|
|
MIB_DESC(2, 0xa8, "RxBytes"),
|
|
|
|
MIB_DESC(1, 0xb0, "RxCtrlDrop"),
|
|
|
|
MIB_DESC(1, 0xb4, "RxIngressDrop"),
|
|
|
|
MIB_DESC(1, 0xb8, "RxArlDrop"),
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Since phy_device has not yet been created and
|
|
|
|
* phy_{read,write}_mmd_indirect is not available, we provide our own
|
|
|
|
* core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
|
|
|
|
* to complete this function.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
|
|
|
|
{
|
|
|
|
struct mii_bus *bus = priv->bus;
|
|
|
|
int value, ret;
|
|
|
|
|
|
|
|
/* Write the desired MMD Devad */
|
|
|
|
ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
/* Write the desired MMD register address */
|
|
|
|
ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
/* Select the Function : DATA with no post increment */
|
|
|
|
ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
/* Read the content of the MMD's selected register */
|
|
|
|
value = bus->read(bus, 0, MII_MMD_DATA);
|
|
|
|
|
|
|
|
return value;
|
|
|
|
err:
|
|
|
|
dev_err(&bus->dev, "failed to read mmd register\n");
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
|
|
|
|
int devad, u32 data)
|
|
|
|
{
|
|
|
|
struct mii_bus *bus = priv->bus;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Write the desired MMD Devad */
|
|
|
|
ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
/* Write the desired MMD register address */
|
|
|
|
ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
/* Select the Function : DATA with no post increment */
|
|
|
|
ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
/* Write the data into MMD's selected register */
|
|
|
|
ret = bus->write(bus, 0, MII_MMD_DATA, data);
|
|
|
|
err:
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(&bus->dev,
|
|
|
|
"failed to write mmd register\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(struct mt7530_priv *priv)
|
2023-08-30 17:31:07 +02:00
|
|
|
{
|
2023-10-24 12:59:35 +02:00
|
|
|
if (priv->bus)
|
|
|
|
mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_mutex_unlock(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
if (priv->bus)
|
|
|
|
mutex_unlock(&priv->bus->mdio_lock);
|
|
|
|
}
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static void
|
|
|
|
core_write(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
|
|
{
|
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
|
|
|
|
val &= ~mask;
|
|
|
|
val |= set;
|
|
|
|
core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
core_set(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
|
|
{
|
|
|
|
core_rmw(priv, reg, 0, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
|
|
{
|
|
|
|
core_rmw(priv, reg, val, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
ret = regmap_write(priv->regmap, reg, val);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
if (ret < 0)
|
2023-10-24 12:59:35 +02:00
|
|
|
dev_err(priv->dev,
|
2023-08-30 17:31:07 +02:00
|
|
|
"failed to write mt7530 register\n");
|
2023-10-24 12:59:35 +02:00
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32
|
|
|
|
mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
|
|
|
|
{
|
|
|
|
int ret;
|
2023-10-24 12:59:35 +02:00
|
|
|
u32 val;
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
ret = regmap_read(priv->regmap, reg, &val);
|
|
|
|
if (ret) {
|
|
|
|
WARN_ON_ONCE(1);
|
|
|
|
dev_err(priv->dev,
|
2023-08-30 17:31:07 +02:00
|
|
|
"failed to read mt7530 register\n");
|
2023-10-24 12:59:35 +02:00
|
|
|
return 0;
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
return val;
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
|
|
{
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
mt7530_mii_write(priv, reg, val);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static u32
|
|
|
|
_mt7530_unlocked_read(struct mt7530_dummy_poll *p)
|
|
|
|
{
|
|
|
|
return mt7530_mii_read(p->priv, p->reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32
|
|
|
|
_mt7530_read(struct mt7530_dummy_poll *p)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(p->priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
val = mt7530_mii_read(p->priv, p->reg);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(p->priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
return val;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32
|
|
|
|
mt7530_read(struct mt7530_priv *priv, u32 reg)
|
|
|
|
{
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, reg);
|
|
|
|
return _mt7530_read(&p);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_rmw(struct mt7530_priv *priv, u32 reg,
|
|
|
|
u32 mask, u32 set)
|
|
|
|
{
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
regmap_update_bits(priv->regmap, reg, mask, set);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
|
|
{
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_rmw(priv, reg, val, val);
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
|
|
{
|
|
|
|
mt7530_rmw(priv, reg, val, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
int ret;
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
|
|
|
|
/* Set the command operating upon the MAC address entries */
|
|
|
|
val = ATC_BUSY | ATC_MAT(0) | cmd;
|
|
|
|
mt7530_write(priv, MT7530_ATC, val);
|
|
|
|
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
|
|
|
|
ret = readx_poll_timeout(_mt7530_read, &p, val,
|
|
|
|
!(val & ATC_BUSY), 20, 20000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "reset timeout\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Additional sanity for read command if the specified
|
|
|
|
* entry is invalid
|
|
|
|
*/
|
|
|
|
val = mt7530_read(priv, MT7530_ATC);
|
|
|
|
if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (rsp)
|
|
|
|
*rsp = val;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
|
|
|
|
{
|
|
|
|
u32 reg[3];
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Read from ARL table into an array */
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
|
|
reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4));
|
|
|
|
|
|
|
|
dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n",
|
|
|
|
__func__, __LINE__, i, reg[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
fdb->vid = (reg[1] >> CVID) & CVID_MASK;
|
|
|
|
fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK;
|
|
|
|
fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK;
|
|
|
|
fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK;
|
|
|
|
fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK;
|
|
|
|
fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK;
|
|
|
|
fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK;
|
|
|
|
fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK;
|
|
|
|
fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK;
|
|
|
|
fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
|
|
|
|
u8 port_mask, const u8 *mac,
|
|
|
|
u8 aging, u8 type)
|
|
|
|
{
|
|
|
|
u32 reg[3] = { 0 };
|
|
|
|
int i;
|
|
|
|
|
|
|
|
reg[1] |= vid & CVID_MASK;
|
|
|
|
reg[1] |= ATA2_IVL;
|
|
|
|
reg[1] |= ATA2_FID(FID_BRIDGED);
|
|
|
|
reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
|
|
|
|
reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
|
|
|
|
/* STATIC_ENT indicate that entry is static wouldn't
|
|
|
|
* be aged out and STATIC_EMP specified as erasing an
|
|
|
|
* entry
|
|
|
|
*/
|
|
|
|
reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS;
|
|
|
|
reg[1] |= mac[5] << MAC_BYTE_5;
|
|
|
|
reg[1] |= mac[4] << MAC_BYTE_4;
|
|
|
|
reg[0] |= mac[3] << MAC_BYTE_3;
|
|
|
|
reg[0] |= mac[2] << MAC_BYTE_2;
|
|
|
|
reg[0] |= mac[1] << MAC_BYTE_1;
|
|
|
|
reg[0] |= mac[0] << MAC_BYTE_0;
|
|
|
|
|
|
|
|
/* Write array into the ARL table */
|
|
|
|
for (i = 0; i < 3; i++)
|
|
|
|
mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set up switch core clock for MT7530 */
|
|
|
|
static void mt7530_pll_setup(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
/* Disable core clock */
|
|
|
|
core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
|
|
|
|
|
|
|
|
/* Disable PLL */
|
|
|
|
core_write(priv, CORE_GSWPLL_GRP1, 0);
|
|
|
|
|
|
|
|
/* Set core clock into 500Mhz */
|
|
|
|
core_write(priv, CORE_GSWPLL_GRP2,
|
|
|
|
RG_GSWPLL_POSDIV_500M(1) |
|
|
|
|
RG_GSWPLL_FBKDIV_500M(25));
|
|
|
|
|
|
|
|
/* Enable PLL */
|
|
|
|
core_write(priv, CORE_GSWPLL_GRP1,
|
|
|
|
RG_GSWPLL_EN_PRE |
|
|
|
|
RG_GSWPLL_POSDIV_200M(2) |
|
|
|
|
RG_GSWPLL_FBKDIV_200M(32));
|
|
|
|
|
|
|
|
udelay(20);
|
|
|
|
|
|
|
|
/* Enable core clock */
|
|
|
|
core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
/* If port 6 is available as a CPU port, always prefer that as the default,
|
|
|
|
* otherwise don't care.
|
|
|
|
*/
|
|
|
|
static struct dsa_port *
|
|
|
|
mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds)
|
|
|
|
{
|
|
|
|
struct dsa_port *cpu_dp = dsa_to_port(ds, 6);
|
|
|
|
|
|
|
|
if (dsa_port_is_cpu(cpu_dp))
|
|
|
|
return cpu_dp;
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
/* Setup port 6 interface mode and TRGMII TX circuit */
|
|
|
|
static int
|
|
|
|
mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
u32 ncpo1, ssc_delta, trgint, xtal;
|
|
|
|
|
|
|
|
xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
|
|
|
|
|
|
|
|
if (xtal == HWTRAP_XTAL_20MHZ) {
|
|
|
|
dev_err(priv->dev,
|
|
|
|
"%s: MT7530 with a 20MHz XTAL is not supported!\n",
|
|
|
|
__func__);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (interface) {
|
|
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
|
|
trgint = 0;
|
|
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_TRGMII:
|
|
|
|
trgint = 1;
|
|
|
|
if (xtal == HWTRAP_XTAL_25MHZ)
|
|
|
|
ssc_delta = 0x57;
|
|
|
|
else
|
|
|
|
ssc_delta = 0x87;
|
|
|
|
if (priv->id == ID_MT7621) {
|
|
|
|
/* PLL frequency: 125MHz: 1.0GBit */
|
|
|
|
if (xtal == HWTRAP_XTAL_40MHZ)
|
|
|
|
ncpo1 = 0x0640;
|
|
|
|
if (xtal == HWTRAP_XTAL_25MHZ)
|
|
|
|
ncpo1 = 0x0a00;
|
|
|
|
} else { /* PLL frequency: 250MHz: 2.0Gbit */
|
|
|
|
if (xtal == HWTRAP_XTAL_40MHZ)
|
|
|
|
ncpo1 = 0x0c80;
|
|
|
|
if (xtal == HWTRAP_XTAL_25MHZ)
|
|
|
|
ncpo1 = 0x1400;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(priv->dev, "xMII interface %d not supported\n",
|
|
|
|
interface);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
|
|
|
|
P6_INTF_MODE(trgint));
|
|
|
|
|
|
|
|
if (trgint) {
|
|
|
|
/* Disable the MT7530 TRGMII clocks */
|
|
|
|
core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
|
|
|
|
|
|
|
|
/* Setup the MT7530 TRGMII Tx Clock */
|
|
|
|
core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
|
|
|
|
core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
|
|
|
|
core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
|
|
|
|
core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
|
|
|
|
core_write(priv, CORE_PLL_GROUP4,
|
|
|
|
RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
|
|
|
|
RG_SYSPLL_BIAS_LPF_EN);
|
|
|
|
core_write(priv, CORE_PLL_GROUP2,
|
|
|
|
RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
|
|
|
|
RG_SYSPLL_POSDIV(1));
|
|
|
|
core_write(priv, CORE_PLL_GROUP7,
|
|
|
|
RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
|
|
|
|
RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
|
|
|
|
|
|
|
|
/* Enable the MT7530 TRGMII clocks */
|
|
|
|
core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7531_TOP_SIG_SR);
|
|
|
|
|
|
|
|
return (val & PAD_DUAL_SGMII_EN) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7531_pll_setup(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
u32 top_sig;
|
|
|
|
u32 hwstrap;
|
|
|
|
u32 xtal;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
if (mt7531_dual_sgmii_supported(priv))
|
|
|
|
return;
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7531_CREV);
|
|
|
|
top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
|
|
|
|
hwstrap = mt7530_read(priv, MT7531_HWTRAP);
|
|
|
|
if ((val & CHIP_REV_M) > 0)
|
|
|
|
xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
|
|
|
|
HWTRAP_XTAL_FSEL_25MHZ;
|
|
|
|
else
|
|
|
|
xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
|
|
|
|
|
|
|
|
/* Step 1 : Disable MT7531 COREPLL */
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_EN);
|
|
|
|
val &= ~EN_COREPLL;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_EN, val);
|
|
|
|
|
|
|
|
/* Step 2: switch to XTAL output */
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_EN);
|
|
|
|
val |= SW_CLKSW;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_EN, val);
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_CR0);
|
|
|
|
val &= ~RG_COREPLL_EN;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_CR0, val);
|
|
|
|
|
|
|
|
/* Step 3: disable PLLGP and enable program PLLGP */
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_EN);
|
|
|
|
val |= SW_PLLGP;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_EN, val);
|
|
|
|
|
|
|
|
/* Step 4: program COREPLL output frequency to 500MHz */
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_CR0);
|
|
|
|
val &= ~RG_COREPLL_POSDIV_M;
|
|
|
|
val |= 2 << RG_COREPLL_POSDIV_S;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_CR0, val);
|
|
|
|
usleep_range(25, 35);
|
|
|
|
|
|
|
|
switch (xtal) {
|
|
|
|
case HWTRAP_XTAL_FSEL_25MHZ:
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_CR0);
|
|
|
|
val &= ~RG_COREPLL_SDM_PCW_M;
|
|
|
|
val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_CR0, val);
|
|
|
|
break;
|
|
|
|
case HWTRAP_XTAL_FSEL_40MHZ:
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_CR0);
|
|
|
|
val &= ~RG_COREPLL_SDM_PCW_M;
|
|
|
|
val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_CR0, val);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set feedback divide ratio update signal to high */
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_CR0);
|
|
|
|
val |= RG_COREPLL_SDM_PCW_CHG;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_CR0, val);
|
|
|
|
/* Wait for at least 16 XTAL clocks */
|
|
|
|
usleep_range(10, 20);
|
|
|
|
|
|
|
|
/* Step 5: set feedback divide ratio update signal to low */
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_CR0);
|
|
|
|
val &= ~RG_COREPLL_SDM_PCW_CHG;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_CR0, val);
|
|
|
|
|
|
|
|
/* Enable 325M clock for SGMII */
|
|
|
|
mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000);
|
|
|
|
|
|
|
|
/* Enable 250SSC clock for RGMII */
|
|
|
|
mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000);
|
|
|
|
|
|
|
|
/* Step 6: Enable MT7531 PLL */
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_CR0);
|
|
|
|
val |= RG_COREPLL_EN;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_CR0, val);
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7531_PLLGP_EN);
|
|
|
|
val |= EN_COREPLL;
|
|
|
|
mt7530_write(priv, MT7531_PLLGP_EN, val);
|
|
|
|
usleep_range(25, 35);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_mib_reset(struct dsa_switch *ds)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH);
|
|
|
|
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt7530_phy_read_c22(struct mt7530_priv *priv, int port, int regnum)
|
|
|
|
{
|
|
|
|
return mdiobus_read_nested(priv->bus, port, regnum);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt7530_phy_write_c22(struct mt7530_priv *priv, int port, int regnum,
|
|
|
|
u16 val)
|
|
|
|
{
|
|
|
|
return mdiobus_write_nested(priv->bus, port, regnum, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt7530_phy_read_c45(struct mt7530_priv *priv, int port,
|
|
|
|
int devad, int regnum)
|
|
|
|
{
|
|
|
|
return mdiobus_c45_read_nested(priv->bus, port, devad, regnum);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt7530_phy_write_c45(struct mt7530_priv *priv, int port, int devad,
|
|
|
|
int regnum, u16 val)
|
|
|
|
{
|
|
|
|
return mdiobus_c45_write_nested(priv->bus, port, devad, regnum, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
|
|
|
|
int regnum)
|
|
|
|
{
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
u32 reg, val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
|
|
|
|
!(val & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
|
|
|
|
MT7531_MDIO_DEV_ADDR(devad) | regnum;
|
|
|
|
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
|
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
|
|
|
|
!(val & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) |
|
|
|
|
MT7531_MDIO_DEV_ADDR(devad);
|
|
|
|
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
|
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
|
|
|
|
!(val & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = val & MT7531_MDIO_RW_DATA_MASK;
|
|
|
|
out:
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
|
|
|
|
int regnum, u16 data)
|
|
|
|
{
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
u32 val, reg;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
|
|
|
|
!(val & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
|
|
|
|
MT7531_MDIO_DEV_ADDR(devad) | regnum;
|
|
|
|
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
|
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
|
|
|
|
!(val & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) |
|
|
|
|
MT7531_MDIO_DEV_ADDR(devad) | data;
|
|
|
|
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
|
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
|
|
|
|
!(val & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
|
|
|
|
{
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
int ret;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
|
|
|
|
!(val & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) |
|
|
|
|
MT7531_MDIO_REG_ADDR(regnum);
|
|
|
|
|
|
|
|
mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST);
|
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
|
|
|
|
!(val & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = val & MT7531_MDIO_RW_DATA_MASK;
|
|
|
|
out:
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
|
|
|
|
u16 data)
|
|
|
|
{
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
int ret;
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
|
|
|
|
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) |
|
|
|
|
MT7531_MDIO_REG_ADDR(regnum) | data;
|
|
|
|
|
|
|
|
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
|
|
|
|
|
|
|
|
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
|
|
|
|
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt753x_phy_read_c22(struct mii_bus *bus, int port, int regnum)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = bus->priv;
|
|
|
|
|
|
|
|
return priv->info->phy_read_c22(priv, port, regnum);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt753x_phy_read_c45(struct mii_bus *bus, int port, int devad, int regnum)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = bus->priv;
|
|
|
|
|
|
|
|
return priv->info->phy_read_c45(priv, port, devad, regnum);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt753x_phy_write_c22(struct mii_bus *bus, int port, int regnum, u16 val)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = bus->priv;
|
|
|
|
|
|
|
|
return priv->info->phy_write_c22(priv, port, regnum, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt753x_phy_write_c45(struct mii_bus *bus, int port, int devad, int regnum,
|
|
|
|
u16 val)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = bus->priv;
|
|
|
|
|
|
|
|
return priv->info->phy_write_c45(priv, port, devad, regnum, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
|
|
|
|
uint8_t *data)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (stringset != ETH_SS_STATS)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++)
|
|
|
|
strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name,
|
|
|
|
ETH_GSTRING_LEN);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|
|
|
uint64_t *data)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
const struct mt7530_mib_desc *mib;
|
|
|
|
u32 reg, i;
|
|
|
|
u64 hi;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) {
|
|
|
|
mib = &mt7530_mib[i];
|
|
|
|
reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset;
|
|
|
|
|
|
|
|
data[i] = mt7530_read(priv, reg);
|
|
|
|
if (mib->size == 2) {
|
|
|
|
hi = mt7530_read(priv, reg + 4);
|
|
|
|
data[i] |= hi << 32;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset)
|
|
|
|
{
|
|
|
|
if (sset != ETH_SS_STATS)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return ARRAY_SIZE(mt7530_mib);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
unsigned int secs = msecs / 1000;
|
|
|
|
unsigned int tmp_age_count;
|
|
|
|
unsigned int error = -1;
|
|
|
|
unsigned int age_count;
|
|
|
|
unsigned int age_unit;
|
|
|
|
|
|
|
|
/* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */
|
|
|
|
if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1))
|
|
|
|
return -ERANGE;
|
|
|
|
|
|
|
|
/* iterate through all possible age_count to find the closest pair */
|
|
|
|
for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) {
|
|
|
|
unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1;
|
|
|
|
|
|
|
|
if (tmp_age_unit <= AGE_UNIT_MAX) {
|
|
|
|
unsigned int tmp_error = secs -
|
|
|
|
(tmp_age_count + 1) * (tmp_age_unit + 1);
|
|
|
|
|
|
|
|
/* found a closer pair */
|
|
|
|
if (error > tmp_error) {
|
|
|
|
error = tmp_error;
|
|
|
|
age_count = tmp_age_count;
|
|
|
|
age_unit = tmp_age_unit;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* found the exact match, so break the loop */
|
|
|
|
if (!error)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static const char *p5_intf_modes(unsigned int p5_interface)
|
|
|
|
{
|
|
|
|
switch (p5_interface) {
|
|
|
|
case P5_DISABLED:
|
|
|
|
return "DISABLED";
|
|
|
|
case P5_INTF_SEL_PHY_P0:
|
|
|
|
return "PHY P0";
|
|
|
|
case P5_INTF_SEL_PHY_P4:
|
|
|
|
return "PHY P4";
|
|
|
|
case P5_INTF_SEL_GMAC5:
|
|
|
|
return "GMAC5";
|
|
|
|
case P5_INTF_SEL_GMAC5_SGMII:
|
|
|
|
return "GMAC5_SGMII";
|
|
|
|
default:
|
|
|
|
return "unknown";
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
u8 tx_delay = 0;
|
|
|
|
int val;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7530_MHWTRAP);
|
|
|
|
|
|
|
|
val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
|
|
|
|
val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
|
|
|
|
|
|
|
|
switch (priv->p5_intf_sel) {
|
|
|
|
case P5_INTF_SEL_PHY_P0:
|
|
|
|
/* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
|
|
|
|
val |= MHWTRAP_PHY0_SEL;
|
|
|
|
fallthrough;
|
|
|
|
case P5_INTF_SEL_PHY_P4:
|
|
|
|
/* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
|
|
|
|
val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
|
|
|
|
|
|
|
|
/* Setup the MAC by default for the cpu port */
|
|
|
|
mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
|
|
|
|
break;
|
|
|
|
case P5_INTF_SEL_GMAC5:
|
|
|
|
/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
|
|
|
|
val &= ~MHWTRAP_P5_DIS;
|
|
|
|
break;
|
|
|
|
case P5_DISABLED:
|
|
|
|
interface = PHY_INTERFACE_MODE_NA;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
|
|
|
|
priv->p5_intf_sel);
|
|
|
|
goto unlock_exit;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Setup RGMII settings */
|
|
|
|
if (phy_interface_mode_is_rgmii(interface)) {
|
|
|
|
val |= MHWTRAP_P5_RGMII_MODE;
|
|
|
|
|
|
|
|
/* P5 RGMII RX Clock Control: delay setting for 1000M */
|
|
|
|
mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
|
|
|
|
|
|
|
|
/* Don't set delay in DSA mode */
|
|
|
|
if (!dsa_is_dsa_port(priv->ds, 5) &&
|
|
|
|
(interface == PHY_INTERFACE_MODE_RGMII_TXID ||
|
|
|
|
interface == PHY_INTERFACE_MODE_RGMII_ID))
|
|
|
|
tx_delay = 4; /* n * 0.5 ns */
|
|
|
|
|
|
|
|
/* P5 RGMII TX Clock Control: delay x */
|
|
|
|
mt7530_write(priv, MT7530_P5RGMIITXCR,
|
|
|
|
CSR_RGMII_TXC_CFG(0x10 + tx_delay));
|
|
|
|
|
|
|
|
/* reduce P5 RGMII Tx driving, 8mA */
|
|
|
|
mt7530_write(priv, MT7530_IO_DRV_CR,
|
|
|
|
P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
|
|
|
|
}
|
|
|
|
|
|
|
|
mt7530_write(priv, MT7530_MHWTRAP, val);
|
|
|
|
|
|
|
|
dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
|
|
|
|
val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
|
|
|
|
|
|
|
|
priv->p5_interface = interface;
|
|
|
|
|
|
|
|
unlock_exit:
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static void
|
|
|
|
mt753x_trap_frames(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
/* Trap BPDUs to the CPU port(s) */
|
|
|
|
mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
|
|
|
|
MT753X_BPDU_CPU_ONLY);
|
|
|
|
|
|
|
|
/* Trap 802.1X PAE frames to the CPU port(s) */
|
|
|
|
mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_PORT_FW_MASK,
|
|
|
|
MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY));
|
|
|
|
|
|
|
|
/* Trap LLDP frames with :0E MAC DA to the CPU port(s) */
|
|
|
|
mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK,
|
|
|
|
MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY));
|
|
|
|
}
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
static int
|
|
|
|
mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Setup max capability of CPU port at first */
|
|
|
|
if (priv->info->cpu_port_config) {
|
|
|
|
ret = priv->info->cpu_port_config(ds, port);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Enable Mediatek header mode on the cpu port */
|
|
|
|
mt7530_write(priv, MT7530_PVC_P(port),
|
|
|
|
PORT_SPEC_TAG);
|
|
|
|
|
|
|
|
/* Enable flooding on the CPU port */
|
|
|
|
mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
|
|
|
|
UNU_FFP(BIT(port)));
|
|
|
|
|
|
|
|
/* Set CPU port number */
|
2023-10-24 12:59:35 +02:00
|
|
|
if (priv->id == ID_MT7530 || priv->id == ID_MT7621)
|
2023-08-30 17:31:07 +02:00
|
|
|
mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
/* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
|
|
|
|
* the MT7988 SoC. Trapped frames will be forwarded to the CPU port that
|
|
|
|
* is affine to the inbound user port.
|
|
|
|
*/
|
|
|
|
if (priv->id == ID_MT7531 || priv->id == ID_MT7988)
|
|
|
|
mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port)));
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
/* CPU port gets connected to all user ports of
|
|
|
|
* the switch.
|
|
|
|
*/
|
|
|
|
mt7530_write(priv, MT7530_PCR_P(port),
|
|
|
|
PCR_MATRIX(dsa_user_ports(priv->ds)));
|
|
|
|
|
|
|
|
/* Set to fallback mode for independent VLAN learning */
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
|
|
MT7530_PORT_FALLBACK_MODE);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_enable(struct dsa_switch *ds, int port,
|
|
|
|
struct phy_device *phy)
|
|
|
|
{
|
|
|
|
struct dsa_port *dp = dsa_to_port(ds, port);
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
/* Allow the user port gets connected to the cpu port and also
|
|
|
|
* restore the port matrix if the port is the member of a certain
|
|
|
|
* bridge.
|
|
|
|
*/
|
|
|
|
if (dsa_port_is_user(dp)) {
|
|
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
|
|
|
|
|
|
priv->ports[port].pm |= PCR_MATRIX(BIT(cpu_dp->index));
|
|
|
|
}
|
|
|
|
priv->ports[port].enable = true;
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
|
|
|
|
priv->ports[port].pm);
|
|
|
|
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
|
|
|
|
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_port_disable(struct dsa_switch *ds, int port)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
/* Clear up all port matrix which could be restored in the next
|
|
|
|
* enablement for the port.
|
|
|
|
*/
|
|
|
|
priv->ports[port].enable = false;
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
|
|
|
|
PCR_MATRIX_CLR);
|
|
|
|
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
|
|
|
|
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
int length;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
/* When a new MTU is set, DSA always set the CPU port's MTU to the
|
|
|
|
* largest MTU of the slave ports. Because the switch only has a global
|
|
|
|
* RX length register, only allowing CPU port here is enough.
|
|
|
|
*/
|
|
|
|
if (!dsa_is_cpu_port(ds, port))
|
|
|
|
return 0;
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
val = mt7530_mii_read(priv, MT7530_GMACCR);
|
|
|
|
val &= ~MAX_RX_PKT_LEN_MASK;
|
|
|
|
|
|
|
|
/* RX length also includes Ethernet header, MTK tag, and FCS length */
|
|
|
|
length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN;
|
|
|
|
if (length <= 1522) {
|
|
|
|
val |= MAX_RX_PKT_LEN_1522;
|
|
|
|
} else if (length <= 1536) {
|
|
|
|
val |= MAX_RX_PKT_LEN_1536;
|
|
|
|
} else if (length <= 1552) {
|
|
|
|
val |= MAX_RX_PKT_LEN_1552;
|
|
|
|
} else {
|
|
|
|
val &= ~MAX_RX_JUMBO_MASK;
|
|
|
|
val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024));
|
|
|
|
val |= MAX_RX_PKT_LEN_JUMBO;
|
|
|
|
}
|
|
|
|
|
|
|
|
mt7530_mii_write(priv, MT7530_GMACCR, val);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_max_mtu(struct dsa_switch *ds, int port)
|
|
|
|
{
|
|
|
|
return MT7530_MAX_MTU;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
u32 stp_state;
|
|
|
|
|
|
|
|
switch (state) {
|
|
|
|
case BR_STATE_DISABLED:
|
|
|
|
stp_state = MT7530_STP_DISABLED;
|
|
|
|
break;
|
|
|
|
case BR_STATE_BLOCKING:
|
|
|
|
stp_state = MT7530_STP_BLOCKING;
|
|
|
|
break;
|
|
|
|
case BR_STATE_LISTENING:
|
|
|
|
stp_state = MT7530_STP_LISTENING;
|
|
|
|
break;
|
|
|
|
case BR_STATE_LEARNING:
|
|
|
|
stp_state = MT7530_STP_LEARNING;
|
|
|
|
break;
|
|
|
|
case BR_STATE_FORWARDING:
|
|
|
|
default:
|
|
|
|
stp_state = MT7530_STP_FORWARDING;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK(FID_BRIDGED),
|
|
|
|
FID_PST(FID_BRIDGED, stp_state));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_pre_bridge_flags(struct dsa_switch *ds, int port,
|
|
|
|
struct switchdev_brport_flags flags,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD |
|
|
|
|
BR_BCAST_FLOOD))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_bridge_flags(struct dsa_switch *ds, int port,
|
|
|
|
struct switchdev_brport_flags flags,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
if (flags.mask & BR_LEARNING)
|
|
|
|
mt7530_rmw(priv, MT7530_PSC_P(port), SA_DIS,
|
|
|
|
flags.val & BR_LEARNING ? 0 : SA_DIS);
|
|
|
|
|
|
|
|
if (flags.mask & BR_FLOOD)
|
|
|
|
mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)),
|
|
|
|
flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
|
|
|
|
|
|
|
|
if (flags.mask & BR_MCAST_FLOOD)
|
|
|
|
mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)),
|
|
|
|
flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
|
|
|
|
|
|
|
|
if (flags.mask & BR_BCAST_FLOOD)
|
|
|
|
mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)),
|
|
|
|
flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_bridge_join(struct dsa_switch *ds, int port,
|
|
|
|
struct dsa_bridge bridge, bool *tx_fwd_offload,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
|
|
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
|
|
u32 port_bitmap = BIT(cpu_dp->index);
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
dsa_switch_for_each_user_port(other_dp, ds) {
|
|
|
|
int other_port = other_dp->index;
|
|
|
|
|
|
|
|
if (dp == other_dp)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Add this port to the port matrix of the other ports in the
|
|
|
|
* same bridge. If the port is disabled, port matrix is kept
|
|
|
|
* and not being setup until the port becomes enabled.
|
|
|
|
*/
|
|
|
|
if (!dsa_port_offloads_bridge(other_dp, &bridge))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (priv->ports[other_port].enable)
|
|
|
|
mt7530_set(priv, MT7530_PCR_P(other_port),
|
|
|
|
PCR_MATRIX(BIT(port)));
|
|
|
|
priv->ports[other_port].pm |= PCR_MATRIX(BIT(port));
|
|
|
|
|
|
|
|
port_bitmap |= BIT(other_port);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Add the all other ports to this port matrix. */
|
|
|
|
if (priv->ports[port].enable)
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port),
|
|
|
|
PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
|
|
|
|
priv->ports[port].pm |= PCR_MATRIX(port_bitmap);
|
|
|
|
|
|
|
|
/* Set to fallback mode for independent VLAN learning */
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
|
|
MT7530_PORT_FALLBACK_MODE);
|
|
|
|
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
bool all_user_ports_removed = true;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* This is called after .port_bridge_leave when leaving a VLAN-aware
|
|
|
|
* bridge. Don't set standalone ports to fallback mode.
|
|
|
|
*/
|
|
|
|
if (dsa_port_bridge_dev_get(dsa_to_port(ds, port)))
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
|
|
MT7530_PORT_FALLBACK_MODE);
|
|
|
|
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(port),
|
|
|
|
VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK,
|
|
|
|
VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
|
|
|
|
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) |
|
|
|
|
MT7530_VLAN_ACC_ALL);
|
|
|
|
|
|
|
|
/* Set PVID to 0 */
|
|
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
|
|
G0_PORT_VID_DEF);
|
|
|
|
|
|
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++) {
|
|
|
|
if (dsa_is_user_port(ds, i) &&
|
|
|
|
dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
|
|
|
|
all_user_ports_removed = false;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* CPU port also does the same thing until all user ports belonging to
|
|
|
|
* the CPU port get out of VLAN filtering mode.
|
|
|
|
*/
|
|
|
|
if (all_user_ports_removed) {
|
|
|
|
struct dsa_port *dp = dsa_to_port(ds, port);
|
|
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
|
|
|
|
|
|
mt7530_write(priv, MT7530_PCR_P(cpu_dp->index),
|
|
|
|
PCR_MATRIX(dsa_user_ports(priv->ds)));
|
|
|
|
mt7530_write(priv, MT7530_PVC_P(cpu_dp->index), PORT_SPEC_TAG
|
|
|
|
| PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
/* Trapped into security mode allows packet forwarding through VLAN
|
|
|
|
* table lookup.
|
|
|
|
*/
|
|
|
|
if (dsa_is_user_port(ds, port)) {
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
|
|
MT7530_PORT_SECURITY_MODE);
|
|
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
|
|
G0_PORT_VID(priv->ports[port].pvid));
|
|
|
|
|
|
|
|
/* Only accept tagged frames if PVID is not set */
|
|
|
|
if (!priv->ports[port].pvid)
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
|
|
|
|
MT7530_VLAN_ACC_TAGGED);
|
|
|
|
|
|
|
|
/* Set the port as a user port which is to be able to recognize
|
|
|
|
* VID from incoming packets before fetching entry within the
|
|
|
|
* VLAN table.
|
|
|
|
*/
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(port),
|
|
|
|
VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
|
|
|
|
VLAN_ATTR(MT7530_VLAN_USER) |
|
|
|
|
PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
|
|
|
|
} else {
|
|
|
|
/* Also set CPU ports to the "user" VLAN port attribute, to
|
|
|
|
* allow VLAN classification, but keep the EG_TAG attribute as
|
|
|
|
* "consistent" (i.o.w. don't change its value) for packets
|
|
|
|
* received by the switch from the CPU, so that tagged packets
|
|
|
|
* are forwarded to user ports as tagged, and untagged as
|
|
|
|
* untagged.
|
|
|
|
*/
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
|
|
|
|
VLAN_ATTR(MT7530_VLAN_USER));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
|
|
|
|
struct dsa_bridge bridge)
|
|
|
|
{
|
|
|
|
struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
|
|
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
dsa_switch_for_each_user_port(other_dp, ds) {
|
|
|
|
int other_port = other_dp->index;
|
|
|
|
|
|
|
|
if (dp == other_dp)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Remove this port from the port matrix of the other ports
|
|
|
|
* in the same bridge. If the port is disabled, port matrix
|
|
|
|
* is kept and not being setup until the port becomes enabled.
|
|
|
|
*/
|
|
|
|
if (!dsa_port_offloads_bridge(other_dp, &bridge))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (priv->ports[other_port].enable)
|
|
|
|
mt7530_clear(priv, MT7530_PCR_P(other_port),
|
|
|
|
PCR_MATRIX(BIT(port)));
|
|
|
|
priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set the cpu port to be the only one in the port matrix of
|
|
|
|
* this port.
|
|
|
|
*/
|
|
|
|
if (priv->ports[port].enable)
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
|
|
|
|
PCR_MATRIX(BIT(cpu_dp->index)));
|
|
|
|
priv->ports[port].pm = PCR_MATRIX(BIT(cpu_dp->index));
|
|
|
|
|
|
|
|
/* When a port is removed from the bridge, the port would be set up
|
|
|
|
* back to the default as is at initial boot which is a VLAN-unaware
|
|
|
|
* port.
|
|
|
|
*/
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
|
|
MT7530_PORT_MATRIX_MODE);
|
|
|
|
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_fdb_add(struct dsa_switch *ds, int port,
|
|
|
|
const unsigned char *addr, u16 vid,
|
|
|
|
struct dsa_db db)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
int ret;
|
|
|
|
u8 port_mask = BIT(port);
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
|
|
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_fdb_del(struct dsa_switch *ds, int port,
|
|
|
|
const unsigned char *addr, u16 vid,
|
|
|
|
struct dsa_db db)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
int ret;
|
|
|
|
u8 port_mask = BIT(port);
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP);
|
|
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_fdb_dump(struct dsa_switch *ds, int port,
|
|
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
struct mt7530_fdb _fdb = { 0 };
|
|
|
|
int cnt = MT7530_NUM_FDB_RECORDS;
|
|
|
|
int ret = 0;
|
|
|
|
u32 rsp = 0;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
do {
|
|
|
|
if (rsp & ATC_SRCH_HIT) {
|
|
|
|
mt7530_fdb_read(priv, &_fdb);
|
|
|
|
if (_fdb.port_mask & BIT(port)) {
|
|
|
|
ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp,
|
|
|
|
data);
|
|
|
|
if (ret < 0)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} while (--cnt &&
|
|
|
|
!(rsp & ATC_SRCH_END) &&
|
|
|
|
!mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp));
|
|
|
|
err:
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_mdb_add(struct dsa_switch *ds, int port,
|
|
|
|
const struct switchdev_obj_port_mdb *mdb,
|
|
|
|
struct dsa_db db)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
const u8 *addr = mdb->addr;
|
|
|
|
u16 vid = mdb->vid;
|
|
|
|
u8 port_mask = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
|
|
|
|
if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL))
|
|
|
|
port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP)
|
|
|
|
& PORT_MAP_MASK;
|
|
|
|
|
|
|
|
port_mask |= BIT(port);
|
|
|
|
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
|
|
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
|
|
|
|
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_mdb_del(struct dsa_switch *ds, int port,
|
|
|
|
const struct switchdev_obj_port_mdb *mdb,
|
|
|
|
struct dsa_db db)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
const u8 *addr = mdb->addr;
|
|
|
|
u16 vid = mdb->vid;
|
|
|
|
u8 port_mask = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
|
|
|
|
if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL))
|
|
|
|
port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP)
|
|
|
|
& PORT_MAP_MASK;
|
|
|
|
|
|
|
|
port_mask &= ~BIT(port);
|
|
|
|
mt7530_fdb_write(priv, vid, port_mask, addr, -1,
|
|
|
|
port_mask ? STATIC_ENT : STATIC_EMP);
|
|
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
|
|
|
|
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
|
|
|
|
{
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
u32 val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
val = VTCR_BUSY | VTCR_FUNC(cmd) | vid;
|
|
|
|
mt7530_write(priv, MT7530_VTCR, val);
|
|
|
|
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR);
|
|
|
|
ret = readx_poll_timeout(_mt7530_read, &p, val,
|
|
|
|
!(val & VTCR_BUSY), 20, 20000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7530_VTCR);
|
|
|
|
if (val & VTCR_INVALID) {
|
|
|
|
dev_err(priv->dev, "read VTCR invalid\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct dsa_port *dp = dsa_to_port(ds, port);
|
|
|
|
struct dsa_port *cpu_dp = dp->cpu_dp;
|
|
|
|
|
|
|
|
if (vlan_filtering) {
|
|
|
|
/* The port is being kept as VLAN-unaware port when bridge is
|
|
|
|
* set up with vlan_filtering not being set, Otherwise, the
|
|
|
|
* port and the corresponding CPU port is required the setup
|
|
|
|
* for becoming a VLAN-aware port.
|
|
|
|
*/
|
|
|
|
mt7530_port_set_vlan_aware(ds, port);
|
|
|
|
mt7530_port_set_vlan_aware(ds, cpu_dp->index);
|
|
|
|
} else {
|
|
|
|
mt7530_port_set_vlan_unaware(ds, port);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_hw_vlan_add(struct mt7530_priv *priv,
|
|
|
|
struct mt7530_hw_vlan_entry *entry)
|
|
|
|
{
|
|
|
|
struct dsa_port *dp = dsa_to_port(priv->ds, entry->port);
|
|
|
|
u8 new_members;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
new_members = entry->old_members | BIT(entry->port);
|
|
|
|
|
|
|
|
/* Validate the entry with independent learning, create egress tag per
|
|
|
|
* VLAN and joining the port as one of the port members.
|
|
|
|
*/
|
|
|
|
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | FID(FID_BRIDGED) |
|
|
|
|
VLAN_VALID;
|
|
|
|
mt7530_write(priv, MT7530_VAWD1, val);
|
|
|
|
|
|
|
|
/* Decide whether adding tag or not for those outgoing packets from the
|
|
|
|
* port inside the VLAN.
|
|
|
|
* CPU port is always taken as a tagged port for serving more than one
|
|
|
|
* VLANs across and also being applied with egress type stack mode for
|
|
|
|
* that VLAN tags would be appended after hardware special tag used as
|
|
|
|
* DSA tag.
|
|
|
|
*/
|
|
|
|
if (dsa_port_is_cpu(dp))
|
|
|
|
val = MT7530_VLAN_EGRESS_STACK;
|
|
|
|
else if (entry->untagged)
|
|
|
|
val = MT7530_VLAN_EGRESS_UNTAG;
|
|
|
|
else
|
|
|
|
val = MT7530_VLAN_EGRESS_TAG;
|
|
|
|
mt7530_rmw(priv, MT7530_VAWD2,
|
|
|
|
ETAG_CTRL_P_MASK(entry->port),
|
|
|
|
ETAG_CTRL_P(entry->port, val));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_hw_vlan_del(struct mt7530_priv *priv,
|
|
|
|
struct mt7530_hw_vlan_entry *entry)
|
|
|
|
{
|
|
|
|
u8 new_members;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
new_members = entry->old_members & ~BIT(entry->port);
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7530_VAWD1);
|
|
|
|
if (!(val & VLAN_VALID)) {
|
|
|
|
dev_err(priv->dev,
|
|
|
|
"Cannot be deleted due to invalid entry\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (new_members) {
|
|
|
|
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) |
|
|
|
|
VLAN_VALID;
|
|
|
|
mt7530_write(priv, MT7530_VAWD1, val);
|
|
|
|
} else {
|
|
|
|
mt7530_write(priv, MT7530_VAWD1, 0);
|
|
|
|
mt7530_write(priv, MT7530_VAWD2, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid,
|
|
|
|
struct mt7530_hw_vlan_entry *entry,
|
|
|
|
mt7530_vlan_op vlan_op)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
/* Fetch entry */
|
|
|
|
mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid);
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7530_VAWD1);
|
|
|
|
|
|
|
|
entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK;
|
|
|
|
|
|
|
|
/* Manipulate entry */
|
|
|
|
vlan_op(priv, entry);
|
|
|
|
|
|
|
|
/* Flush result to hardware */
|
|
|
|
mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_setup_vlan0(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
/* Validate the entry with independent learning, keep the original
|
|
|
|
* ingress tag attribute.
|
|
|
|
*/
|
|
|
|
val = IVL_MAC | EG_CON | PORT_MEM(MT7530_ALL_MEMBERS) | FID(FID_BRIDGED) |
|
|
|
|
VLAN_VALID;
|
|
|
|
mt7530_write(priv, MT7530_VAWD1, val);
|
|
|
|
|
|
|
|
return mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_vlan_add(struct dsa_switch *ds, int port,
|
|
|
|
const struct switchdev_obj_port_vlan *vlan,
|
|
|
|
struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
|
|
|
|
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
|
|
|
|
struct mt7530_hw_vlan_entry new_entry;
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
mt7530_hw_vlan_entry_init(&new_entry, port, untagged);
|
|
|
|
mt7530_hw_vlan_update(priv, vlan->vid, &new_entry, mt7530_hw_vlan_add);
|
|
|
|
|
|
|
|
if (pvid) {
|
|
|
|
priv->ports[port].pvid = vlan->vid;
|
|
|
|
|
|
|
|
/* Accept all frames if PVID is set */
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
|
|
|
|
MT7530_VLAN_ACC_ALL);
|
|
|
|
|
|
|
|
/* Only configure PVID if VLAN filtering is enabled */
|
|
|
|
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
|
|
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(port),
|
|
|
|
G0_PORT_VID_MASK,
|
|
|
|
G0_PORT_VID(vlan->vid));
|
|
|
|
} else if (vlan->vid && priv->ports[port].pvid == vlan->vid) {
|
|
|
|
/* This VLAN is overwritten without PVID, so unset it */
|
|
|
|
priv->ports[port].pvid = G0_PORT_VID_DEF;
|
|
|
|
|
|
|
|
/* Only accept tagged frames if the port is VLAN-aware */
|
|
|
|
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
|
|
|
|
MT7530_VLAN_ACC_TAGGED);
|
|
|
|
|
|
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
|
|
G0_PORT_VID_DEF);
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_port_vlan_del(struct dsa_switch *ds, int port,
|
|
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
|
|
{
|
|
|
|
struct mt7530_hw_vlan_entry target_entry;
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
mt7530_hw_vlan_entry_init(&target_entry, port, 0);
|
|
|
|
mt7530_hw_vlan_update(priv, vlan->vid, &target_entry,
|
|
|
|
mt7530_hw_vlan_del);
|
|
|
|
|
|
|
|
/* PVID is being restored to the default whenever the PVID port
|
|
|
|
* is being removed from the VLAN.
|
|
|
|
*/
|
|
|
|
if (priv->ports[port].pvid == vlan->vid) {
|
|
|
|
priv->ports[port].pvid = G0_PORT_VID_DEF;
|
|
|
|
|
|
|
|
/* Only accept tagged frames if the port is VLAN-aware */
|
|
|
|
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
|
|
|
|
MT7530_VLAN_ACC_TAGGED);
|
|
|
|
|
|
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
|
|
G0_PORT_VID_DEF);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt753x_mirror_port_get(unsigned int id, u32 val)
|
|
|
|
{
|
|
|
|
return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) :
|
|
|
|
MIRROR_PORT(val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt753x_mirror_port_set(unsigned int id, u32 val)
|
|
|
|
{
|
|
|
|
return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) :
|
|
|
|
MIRROR_PORT(val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
|
|
|
|
struct dsa_mall_mirror_tc_entry *mirror,
|
|
|
|
bool ingress, struct netlink_ext_ack *extack)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
int monitor_port;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
/* Check for existent entry */
|
|
|
|
if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
|
|
|
|
return -EEXIST;
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
|
|
|
|
|
|
|
|
/* MT7530 only supports one monitor port */
|
|
|
|
monitor_port = mt753x_mirror_port_get(priv->id, val);
|
|
|
|
if (val & MT753X_MIRROR_EN(priv->id) &&
|
|
|
|
monitor_port != mirror->to_local_port)
|
|
|
|
return -EEXIST;
|
|
|
|
|
|
|
|
val |= MT753X_MIRROR_EN(priv->id);
|
|
|
|
val &= ~MT753X_MIRROR_MASK(priv->id);
|
|
|
|
val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
|
|
|
|
mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7530_PCR_P(port));
|
|
|
|
if (ingress) {
|
|
|
|
val |= PORT_RX_MIR;
|
|
|
|
priv->mirror_rx |= BIT(port);
|
|
|
|
} else {
|
|
|
|
val |= PORT_TX_MIR;
|
|
|
|
priv->mirror_tx |= BIT(port);
|
|
|
|
}
|
|
|
|
mt7530_write(priv, MT7530_PCR_P(port), val);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mt753x_port_mirror_del(struct dsa_switch *ds, int port,
|
|
|
|
struct dsa_mall_mirror_tc_entry *mirror)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7530_PCR_P(port));
|
|
|
|
if (mirror->ingress) {
|
|
|
|
val &= ~PORT_RX_MIR;
|
|
|
|
priv->mirror_rx &= ~BIT(port);
|
|
|
|
} else {
|
|
|
|
val &= ~PORT_TX_MIR;
|
|
|
|
priv->mirror_tx &= ~BIT(port);
|
|
|
|
}
|
|
|
|
mt7530_write(priv, MT7530_PCR_P(port), val);
|
|
|
|
|
|
|
|
if (!priv->mirror_rx && !priv->mirror_tx) {
|
|
|
|
val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
|
|
|
|
val &= ~MT753X_MIRROR_EN(priv->id);
|
|
|
|
mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum dsa_tag_protocol
|
|
|
|
mtk_get_tag_protocol(struct dsa_switch *ds, int port,
|
|
|
|
enum dsa_tag_protocol mp)
|
|
|
|
{
|
|
|
|
return DSA_TAG_PROTO_MTK;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_GPIOLIB
|
|
|
|
static inline u32
|
|
|
|
mt7530_gpio_to_bit(unsigned int offset)
|
|
|
|
{
|
|
|
|
/* Map GPIO offset to register bit
|
|
|
|
* [ 2: 0] port 0 LED 0..2 as GPIO 0..2
|
|
|
|
* [ 6: 4] port 1 LED 0..2 as GPIO 3..5
|
|
|
|
* [10: 8] port 2 LED 0..2 as GPIO 6..8
|
|
|
|
* [14:12] port 3 LED 0..2 as GPIO 9..11
|
|
|
|
* [18:16] port 4 LED 0..2 as GPIO 12..14
|
|
|
|
*/
|
|
|
|
return BIT(offset + offset / 3);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = gpiochip_get_data(gc);
|
|
|
|
u32 bit = mt7530_gpio_to_bit(offset);
|
|
|
|
|
|
|
|
return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = gpiochip_get_data(gc);
|
|
|
|
u32 bit = mt7530_gpio_to_bit(offset);
|
|
|
|
|
|
|
|
if (value)
|
|
|
|
mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
|
|
|
|
else
|
|
|
|
mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = gpiochip_get_data(gc);
|
|
|
|
u32 bit = mt7530_gpio_to_bit(offset);
|
|
|
|
|
|
|
|
return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ?
|
|
|
|
GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = gpiochip_get_data(gc);
|
|
|
|
u32 bit = mt7530_gpio_to_bit(offset);
|
|
|
|
|
|
|
|
mt7530_clear(priv, MT7530_LED_GPIO_OE, bit);
|
|
|
|
mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = gpiochip_get_data(gc);
|
|
|
|
u32 bit = mt7530_gpio_to_bit(offset);
|
|
|
|
|
|
|
|
mt7530_set(priv, MT7530_LED_GPIO_DIR, bit);
|
|
|
|
|
|
|
|
if (value)
|
|
|
|
mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
|
|
|
|
else
|
|
|
|
mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
|
|
|
|
|
|
|
|
mt7530_set(priv, MT7530_LED_GPIO_OE, bit);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_setup_gpio(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
struct device *dev = priv->dev;
|
|
|
|
struct gpio_chip *gc;
|
|
|
|
|
|
|
|
gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
|
|
|
|
if (!gc)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
mt7530_write(priv, MT7530_LED_GPIO_OE, 0);
|
|
|
|
mt7530_write(priv, MT7530_LED_GPIO_DIR, 0);
|
|
|
|
mt7530_write(priv, MT7530_LED_IO_MODE, 0);
|
|
|
|
|
|
|
|
gc->label = "mt7530";
|
|
|
|
gc->parent = dev;
|
|
|
|
gc->owner = THIS_MODULE;
|
|
|
|
gc->get_direction = mt7530_gpio_get_direction;
|
|
|
|
gc->direction_input = mt7530_gpio_direction_input;
|
|
|
|
gc->direction_output = mt7530_gpio_direction_output;
|
|
|
|
gc->get = mt7530_gpio_get;
|
|
|
|
gc->set = mt7530_gpio_set;
|
|
|
|
gc->base = -1;
|
|
|
|
gc->ngpio = 15;
|
|
|
|
gc->can_sleep = true;
|
|
|
|
|
|
|
|
return devm_gpiochip_add_data(dev, gc, priv);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_GPIOLIB */
|
|
|
|
|
|
|
|
static irqreturn_t
|
|
|
|
mt7530_irq_thread_fn(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = dev_id;
|
|
|
|
bool handled = false;
|
|
|
|
u32 val;
|
|
|
|
int p;
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
val = mt7530_mii_read(priv, MT7530_SYS_INT_STS);
|
|
|
|
mt7530_mii_write(priv, MT7530_SYS_INT_STS, val);
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
for (p = 0; p < MT7530_NUM_PHYS; p++) {
|
|
|
|
if (BIT(p) & val) {
|
|
|
|
unsigned int irq;
|
|
|
|
|
|
|
|
irq = irq_find_mapping(priv->irq_domain, p);
|
|
|
|
handle_nested_irq(irq);
|
|
|
|
handled = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return IRQ_RETVAL(handled);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_irq_mask(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
|
|
|
|
|
|
|
|
priv->irq_enable &= ~BIT(d->hwirq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_irq_unmask(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
|
|
|
|
|
|
|
|
priv->irq_enable |= BIT(d->hwirq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_irq_bus_lock(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_lock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_irq_bus_sync_unlock(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
|
|
|
|
|
|
|
|
mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
|
2023-10-24 12:59:35 +02:00
|
|
|
mt7530_mutex_unlock(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip mt7530_irq_chip = {
|
|
|
|
.name = KBUILD_MODNAME,
|
|
|
|
.irq_mask = mt7530_irq_mask,
|
|
|
|
.irq_unmask = mt7530_irq_unmask,
|
|
|
|
.irq_bus_lock = mt7530_irq_bus_lock,
|
|
|
|
.irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_irq_map(struct irq_domain *domain, unsigned int irq,
|
|
|
|
irq_hw_number_t hwirq)
|
|
|
|
{
|
|
|
|
irq_set_chip_data(irq, domain->host_data);
|
|
|
|
irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq);
|
|
|
|
irq_set_nested_thread(irq, true);
|
|
|
|
irq_set_noprobe(irq);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct irq_domain_ops mt7530_irq_domain_ops = {
|
|
|
|
.map = mt7530_irq_map,
|
|
|
|
.xlate = irq_domain_xlate_onecell,
|
|
|
|
};
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static void
|
|
|
|
mt7988_irq_mask(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
|
|
|
|
|
|
|
|
priv->irq_enable &= ~BIT(d->hwirq);
|
|
|
|
mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7988_irq_unmask(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
|
|
|
|
|
|
|
|
priv->irq_enable |= BIT(d->hwirq);
|
|
|
|
mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip mt7988_irq_chip = {
|
|
|
|
.name = KBUILD_MODNAME,
|
|
|
|
.irq_mask = mt7988_irq_mask,
|
|
|
|
.irq_unmask = mt7988_irq_unmask,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7988_irq_map(struct irq_domain *domain, unsigned int irq,
|
|
|
|
irq_hw_number_t hwirq)
|
|
|
|
{
|
|
|
|
irq_set_chip_data(irq, domain->host_data);
|
|
|
|
irq_set_chip_and_handler(irq, &mt7988_irq_chip, handle_simple_irq);
|
|
|
|
irq_set_nested_thread(irq, true);
|
|
|
|
irq_set_noprobe(irq);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct irq_domain_ops mt7988_irq_domain_ops = {
|
|
|
|
.map = mt7988_irq_map,
|
|
|
|
.xlate = irq_domain_xlate_onecell,
|
|
|
|
};
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
static void
|
|
|
|
mt7530_setup_mdio_irq(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
struct dsa_switch *ds = priv->ds;
|
|
|
|
int p;
|
|
|
|
|
|
|
|
for (p = 0; p < MT7530_NUM_PHYS; p++) {
|
|
|
|
if (BIT(p) & ds->phys_mii_mask) {
|
|
|
|
unsigned int irq;
|
|
|
|
|
|
|
|
irq = irq_create_mapping(priv->irq_domain, p);
|
|
|
|
ds->slave_mii_bus->irq[p] = irq;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_setup_irq(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
struct device *dev = priv->dev;
|
|
|
|
struct device_node *np = dev->of_node;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!of_property_read_bool(np, "interrupt-controller")) {
|
|
|
|
dev_info(dev, "no interrupt support\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->irq = of_irq_get(np, 0);
|
|
|
|
if (priv->irq <= 0) {
|
|
|
|
dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq);
|
|
|
|
return priv->irq ? : -EINVAL;
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
if (priv->id == ID_MT7988)
|
|
|
|
priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
|
|
|
|
&mt7988_irq_domain_ops,
|
|
|
|
priv);
|
|
|
|
else
|
|
|
|
priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
|
|
|
|
&mt7530_irq_domain_ops,
|
|
|
|
priv);
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
if (!priv->irq_domain) {
|
|
|
|
dev_err(dev, "failed to create IRQ domain\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* This register must be set for MT7530 to properly fire interrupts */
|
|
|
|
if (priv->id != ID_MT7531)
|
|
|
|
mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
|
|
|
|
|
|
|
|
ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn,
|
|
|
|
IRQF_ONESHOT, KBUILD_MODNAME, priv);
|
|
|
|
if (ret) {
|
|
|
|
irq_domain_remove(priv->irq_domain);
|
|
|
|
dev_err(dev, "failed to request IRQ: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_free_mdio_irq(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
int p;
|
|
|
|
|
|
|
|
for (p = 0; p < MT7530_NUM_PHYS; p++) {
|
|
|
|
if (BIT(p) & priv->ds->phys_mii_mask) {
|
|
|
|
unsigned int irq;
|
|
|
|
|
|
|
|
irq = irq_find_mapping(priv->irq_domain, p);
|
|
|
|
irq_dispose_mapping(irq);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_free_irq_common(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
free_irq(priv->irq, priv);
|
|
|
|
irq_domain_remove(priv->irq_domain);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt7530_free_irq(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
mt7530_free_mdio_irq(priv);
|
|
|
|
mt7530_free_irq_common(priv);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_setup_mdio(struct mt7530_priv *priv)
|
|
|
|
{
|
|
|
|
struct dsa_switch *ds = priv->ds;
|
|
|
|
struct device *dev = priv->dev;
|
|
|
|
struct mii_bus *bus;
|
|
|
|
static int idx;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
bus = devm_mdiobus_alloc(dev);
|
|
|
|
if (!bus)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
ds->slave_mii_bus = bus;
|
|
|
|
bus->priv = priv;
|
|
|
|
bus->name = KBUILD_MODNAME "-mii";
|
|
|
|
snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
|
|
|
|
bus->read = mt753x_phy_read_c22;
|
|
|
|
bus->write = mt753x_phy_write_c22;
|
|
|
|
bus->read_c45 = mt753x_phy_read_c45;
|
|
|
|
bus->write_c45 = mt753x_phy_write_c45;
|
|
|
|
bus->parent = dev;
|
|
|
|
bus->phy_mask = ~ds->phys_mii_mask;
|
|
|
|
|
|
|
|
if (priv->irq)
|
|
|
|
mt7530_setup_mdio_irq(priv);
|
|
|
|
|
|
|
|
ret = devm_mdiobus_register(dev, bus);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "failed to register MDIO bus: %d\n", ret);
|
|
|
|
if (priv->irq)
|
|
|
|
mt7530_free_mdio_irq(priv);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_setup(struct dsa_switch *ds)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
struct device_node *dn = NULL;
|
|
|
|
struct device_node *phy_node;
|
|
|
|
struct device_node *mac_np;
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
phy_interface_t interface;
|
|
|
|
struct dsa_port *cpu_dp;
|
|
|
|
u32 id, val;
|
|
|
|
int ret, i;
|
|
|
|
|
|
|
|
/* The parent node of master netdev which holds the common system
|
|
|
|
* controller also is the container for two GMACs nodes representing
|
|
|
|
* as two netdev instances.
|
|
|
|
*/
|
|
|
|
dsa_switch_for_each_cpu_port(cpu_dp, ds) {
|
|
|
|
dn = cpu_dp->master->dev.of_node->parent;
|
|
|
|
/* It doesn't matter which CPU port is found first,
|
|
|
|
* their masters should share the same parent OF node
|
|
|
|
*/
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!dn) {
|
|
|
|
dev_err(ds->dev, "parent OF node of DSA master not found");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ds->assisted_learning_on_cpu_port = true;
|
|
|
|
ds->mtu_enforcement_ingress = true;
|
|
|
|
|
|
|
|
if (priv->id == ID_MT7530) {
|
|
|
|
regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
|
|
|
|
ret = regulator_enable(priv->core_pwr);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev,
|
|
|
|
"Failed to enable core power: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
|
|
|
|
ret = regulator_enable(priv->io_pwr);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "Failed to enable io pwr: %d\n",
|
|
|
|
ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset whole chip through gpio pin or memory-mapped registers for
|
|
|
|
* different type of hardware
|
|
|
|
*/
|
|
|
|
if (priv->mcm) {
|
|
|
|
reset_control_assert(priv->rstc);
|
|
|
|
usleep_range(1000, 1100);
|
|
|
|
reset_control_deassert(priv->rstc);
|
|
|
|
} else {
|
|
|
|
gpiod_set_value_cansleep(priv->reset, 0);
|
|
|
|
usleep_range(1000, 1100);
|
|
|
|
gpiod_set_value_cansleep(priv->reset, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Waiting for MT7530 got to stable */
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
|
|
|
|
ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
|
|
|
|
20, 1000000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "reset timeout\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
id = mt7530_read(priv, MT7530_CREV);
|
|
|
|
id >>= CHIP_NAME_SHIFT;
|
|
|
|
if (id != MT7530_ID) {
|
|
|
|
dev_err(priv->dev, "chip %x can't be supported\n", id);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset the switch through internal reset */
|
|
|
|
mt7530_write(priv, MT7530_SYS_CTRL,
|
|
|
|
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
|
|
|
|
SYS_CTRL_REG_RST);
|
|
|
|
|
|
|
|
mt7530_pll_setup(priv);
|
|
|
|
|
|
|
|
/* Lower Tx driving for TRGMII path */
|
|
|
|
for (i = 0; i < NUM_TRGMII_CTRL; i++)
|
|
|
|
mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
|
|
|
|
TD_DM_DRVP(8) | TD_DM_DRVN(8));
|
|
|
|
|
|
|
|
for (i = 0; i < NUM_TRGMII_CTRL; i++)
|
|
|
|
mt7530_rmw(priv, MT7530_TRGMII_RD(i),
|
|
|
|
RD_TAP_MASK, RD_TAP(16));
|
|
|
|
|
|
|
|
/* Enable port 6 */
|
|
|
|
val = mt7530_read(priv, MT7530_MHWTRAP);
|
|
|
|
val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
|
|
|
|
val |= MHWTRAP_MANUAL;
|
|
|
|
mt7530_write(priv, MT7530_MHWTRAP, val);
|
|
|
|
|
|
|
|
priv->p6_interface = PHY_INTERFACE_MODE_NA;
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt753x_trap_frames(priv);
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
/* Enable and reset MIB counters */
|
|
|
|
mt7530_mib_reset(ds);
|
|
|
|
|
|
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++) {
|
|
|
|
/* Disable forwarding by default on all ports */
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
|
|
|
|
PCR_MATRIX_CLR);
|
|
|
|
|
|
|
|
/* Disable learning by default on all ports */
|
|
|
|
mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
|
|
|
|
|
|
|
|
if (dsa_is_cpu_port(ds, i)) {
|
|
|
|
ret = mt753x_cpu_port_enable(ds, i);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
} else {
|
|
|
|
mt7530_port_disable(ds, i);
|
|
|
|
|
|
|
|
/* Set default PVID to 0 on all user ports */
|
|
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
|
|
|
|
G0_PORT_VID_DEF);
|
|
|
|
}
|
|
|
|
/* Enable consistent egress tag */
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
|
|
|
|
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Setup VLAN ID 0 for VLAN-unaware bridges */
|
|
|
|
ret = mt7530_setup_vlan0(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* Setup port 5 */
|
|
|
|
priv->p5_intf_sel = P5_DISABLED;
|
|
|
|
interface = PHY_INTERFACE_MODE_NA;
|
|
|
|
|
|
|
|
if (!dsa_is_unused_port(ds, 5)) {
|
|
|
|
priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
|
|
|
|
ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface);
|
|
|
|
if (ret && ret != -ENODEV)
|
|
|
|
return ret;
|
|
|
|
} else {
|
|
|
|
/* Scan the ethernet nodes. look for GMAC1, lookup used phy */
|
|
|
|
for_each_child_of_node(dn, mac_np) {
|
|
|
|
if (!of_device_is_compatible(mac_np,
|
|
|
|
"mediatek,eth-mac"))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = of_property_read_u32(mac_np, "reg", &id);
|
|
|
|
if (ret < 0 || id != 1)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
phy_node = of_parse_phandle(mac_np, "phy-handle", 0);
|
|
|
|
if (!phy_node)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (phy_node->parent == priv->dev->of_node->parent) {
|
|
|
|
ret = of_get_phy_mode(mac_np, &interface);
|
|
|
|
if (ret && ret != -ENODEV) {
|
|
|
|
of_node_put(mac_np);
|
|
|
|
of_node_put(phy_node);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
id = of_mdio_parse_addr(ds->dev, phy_node);
|
|
|
|
if (id == 0)
|
|
|
|
priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
|
|
|
|
if (id == 4)
|
|
|
|
priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
|
|
|
|
}
|
|
|
|
of_node_put(mac_np);
|
|
|
|
of_node_put(phy_node);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_GPIOLIB
|
|
|
|
if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) {
|
|
|
|
ret = mt7530_setup_gpio(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_GPIOLIB */
|
|
|
|
|
|
|
|
mt7530_setup_port5(ds, interface);
|
|
|
|
|
|
|
|
/* Flush the FDB table */
|
|
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_setup_common(struct dsa_switch *ds)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
int ret, i;
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mt753x_trap_frames(priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
/* Enable and reset MIB counters */
|
|
|
|
mt7530_mib_reset(ds);
|
|
|
|
|
|
|
|
/* Disable flooding on all ports */
|
|
|
|
mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
|
|
|
|
UNU_FFP_MASK);
|
|
|
|
|
|
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++) {
|
|
|
|
/* Disable forwarding by default on all ports */
|
|
|
|
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
|
|
|
|
PCR_MATRIX_CLR);
|
|
|
|
|
|
|
|
/* Disable learning by default on all ports */
|
|
|
|
mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
|
|
|
|
|
|
|
|
mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
|
|
|
|
|
|
|
|
if (dsa_is_cpu_port(ds, i)) {
|
|
|
|
ret = mt753x_cpu_port_enable(ds, i);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
} else {
|
|
|
|
mt7530_port_disable(ds, i);
|
|
|
|
|
|
|
|
/* Set default PVID to 0 on all user ports */
|
|
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
|
|
|
|
G0_PORT_VID_DEF);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Enable consistent egress tag */
|
|
|
|
mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
|
|
|
|
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Flush the FDB table */
|
|
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_setup(struct dsa_switch *ds)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
struct mt7530_dummy_poll p;
|
|
|
|
u32 val, id;
|
|
|
|
int ret, i;
|
|
|
|
|
|
|
|
/* Reset whole chip through gpio pin or memory-mapped registers for
|
|
|
|
* different type of hardware
|
|
|
|
*/
|
|
|
|
if (priv->mcm) {
|
|
|
|
reset_control_assert(priv->rstc);
|
|
|
|
usleep_range(1000, 1100);
|
|
|
|
reset_control_deassert(priv->rstc);
|
|
|
|
} else {
|
|
|
|
gpiod_set_value_cansleep(priv->reset, 0);
|
|
|
|
usleep_range(1000, 1100);
|
|
|
|
gpiod_set_value_cansleep(priv->reset, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Waiting for MT7530 got to stable */
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
|
|
|
|
ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
|
|
|
|
20, 1000000);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(priv->dev, "reset timeout\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
id = mt7530_read(priv, MT7531_CREV);
|
|
|
|
id >>= CHIP_NAME_SHIFT;
|
|
|
|
|
|
|
|
if (id != MT7531_ID) {
|
|
|
|
dev_err(priv->dev, "chip %x can't be supported\n", id);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* all MACs must be forced link-down before sw reset */
|
|
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++)
|
|
|
|
mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
|
|
|
|
|
|
|
|
/* Reset the switch through internal reset */
|
|
|
|
mt7530_write(priv, MT7530_SYS_CTRL,
|
|
|
|
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
|
|
|
|
SYS_CTRL_REG_RST);
|
|
|
|
|
|
|
|
mt7531_pll_setup(priv);
|
|
|
|
|
|
|
|
if (mt7531_dual_sgmii_supported(priv)) {
|
|
|
|
priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
|
|
|
|
|
|
|
|
/* Let ds->slave_mii_bus be able to access external phy. */
|
|
|
|
mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
|
|
|
|
MT7531_EXT_P_MDC_11);
|
|
|
|
mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
|
|
|
|
MT7531_EXT_P_MDIO_12);
|
|
|
|
} else {
|
|
|
|
priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
|
|
|
|
}
|
|
|
|
dev_dbg(ds->dev, "P5 support %s interface\n",
|
|
|
|
p5_intf_modes(priv->p5_intf_sel));
|
|
|
|
|
|
|
|
mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
|
|
|
|
MT7531_GPIO0_INTERRUPT);
|
|
|
|
|
|
|
|
/* Let phylink decide the interface later. */
|
|
|
|
priv->p5_interface = PHY_INTERFACE_MODE_NA;
|
|
|
|
priv->p6_interface = PHY_INTERFACE_MODE_NA;
|
|
|
|
|
|
|
|
/* Enable PHY core PLL, since phy_device has not yet been created
|
|
|
|
* provided for phy_[read,write]_mmd_indirect is called, we provide
|
|
|
|
* our own mt7531_ind_mmd_phy_[read,write] to complete this
|
|
|
|
* function.
|
|
|
|
*/
|
|
|
|
val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
|
|
|
|
MDIO_MMD_VEND2, CORE_PLL_GROUP4);
|
|
|
|
val |= MT7531_PHY_PLL_BYPASS_MODE;
|
|
|
|
val &= ~MT7531_PHY_PLL_OFF;
|
|
|
|
mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
|
|
|
|
CORE_PLL_GROUP4, val);
|
|
|
|
|
|
|
|
mt7531_setup_common(ds);
|
|
|
|
|
|
|
|
/* Setup VLAN ID 0 for VLAN-unaware bridges */
|
|
|
|
ret = mt7530_setup_vlan0(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ds->assisted_learning_on_cpu_port = true;
|
|
|
|
ds->mtu_enforcement_ingress = true;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
|
|
|
|
struct phylink_config *config)
|
|
|
|
{
|
|
|
|
switch (port) {
|
|
|
|
case 0 ... 4: /* Internal phy */
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_GMII,
|
|
|
|
config->supported_interfaces);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
|
|
|
|
phy_interface_set_rgmii(config->supported_interfaces);
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_MII,
|
|
|
|
config->supported_interfaces);
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_GMII,
|
|
|
|
config->supported_interfaces);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 6: /* 1st cpu port */
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_RGMII,
|
|
|
|
config->supported_interfaces);
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_TRGMII,
|
|
|
|
config->supported_interfaces);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
|
|
|
|
{
|
|
|
|
return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
|
|
|
|
struct phylink_config *config)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
switch (port) {
|
|
|
|
case 0 ... 4: /* Internal phy */
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_GMII,
|
|
|
|
config->supported_interfaces);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
|
|
|
|
if (mt7531_is_rgmii_port(priv, port)) {
|
|
|
|
phy_interface_set_rgmii(config->supported_interfaces);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
fallthrough;
|
|
|
|
|
|
|
|
case 6: /* 1st cpu port supports sgmii/8023z only */
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_SGMII,
|
|
|
|
config->supported_interfaces);
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_1000BASEX,
|
|
|
|
config->supported_interfaces);
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_2500BASEX,
|
|
|
|
config->supported_interfaces);
|
|
|
|
|
|
|
|
config->mac_capabilities |= MAC_2500FD;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
|
|
|
|
struct phylink_config *config)
|
|
|
|
{
|
|
|
|
phy_interface_zero(config->supported_interfaces);
|
|
|
|
|
|
|
|
switch (port) {
|
|
|
|
case 0 ... 4: /* Internal phy */
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
|
|
|
|
config->supported_interfaces);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 6:
|
|
|
|
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
|
|
|
|
config->supported_interfaces);
|
|
|
|
config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
|
|
|
|
MAC_10000FD;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
static int
|
|
|
|
mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
return priv->info->pad_setup(ds, state->interface);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
|
|
|
|
phy_interface_t interface)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
/* Only need to setup port5. */
|
|
|
|
if (port != 5)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
mt7530_setup_port5(priv->ds, interface);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
|
|
|
|
phy_interface_t interface,
|
|
|
|
struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
if (!mt7531_is_rgmii_port(priv, port)) {
|
|
|
|
dev_err(priv->dev, "RGMII mode is not available for port %d\n",
|
|
|
|
port);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
|
|
|
|
val |= GP_CLK_EN;
|
|
|
|
val &= ~GP_MODE_MASK;
|
|
|
|
val |= GP_MODE(MT7531_GP_MODE_RGMII);
|
|
|
|
val &= ~CLK_SKEW_IN_MASK;
|
|
|
|
val |= CLK_SKEW_IN(MT7531_CLK_SKEW_NO_CHG);
|
|
|
|
val &= ~CLK_SKEW_OUT_MASK;
|
|
|
|
val |= CLK_SKEW_OUT(MT7531_CLK_SKEW_NO_CHG);
|
|
|
|
val |= TXCLK_NO_REVERSE | RXCLK_NO_DELAY;
|
|
|
|
|
|
|
|
/* Do not adjust rgmii delay when vendor phy driver presents. */
|
|
|
|
if (!phydev || phy_driver_is_genphy(phydev)) {
|
|
|
|
val &= ~(TXCLK_NO_REVERSE | RXCLK_NO_DELAY);
|
|
|
|
switch (interface) {
|
|
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
|
|
val |= TXCLK_NO_REVERSE;
|
|
|
|
val |= RXCLK_NO_DELAY;
|
|
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
|
|
val |= TXCLK_NO_REVERSE;
|
|
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
|
|
val |= RXCLK_NO_DELAY;
|
|
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool mt753x_is_mac_port(u32 port)
|
|
|
|
{
|
|
|
|
return (port == 5 || port == 6);
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static int
|
|
|
|
mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
|
|
|
|
phy_interface_t interface)
|
2023-08-30 17:31:07 +02:00
|
|
|
{
|
2023-10-24 12:59:35 +02:00
|
|
|
if (dsa_is_cpu_port(ds, port) &&
|
|
|
|
interface == PHY_INTERFACE_MODE_INTERNAL)
|
|
|
|
return 0;
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
return -EINVAL;
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
|
|
|
|
phy_interface_t interface)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
struct phy_device *phydev;
|
|
|
|
struct dsa_port *dp;
|
|
|
|
|
|
|
|
if (!mt753x_is_mac_port(port)) {
|
|
|
|
dev_err(priv->dev, "port %d is not a MAC port\n", port);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (interface) {
|
|
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
|
|
dp = dsa_to_port(ds, port);
|
|
|
|
phydev = dp->slave->phydev;
|
|
|
|
return mt7531_rgmii_setup(priv, port, interface, phydev);
|
|
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
|
|
case PHY_INTERFACE_MODE_NA:
|
|
|
|
case PHY_INTERFACE_MODE_1000BASEX:
|
|
|
|
case PHY_INTERFACE_MODE_2500BASEX:
|
2023-10-24 12:59:35 +02:00
|
|
|
/* handled in SGMII PCS driver */
|
|
|
|
return 0;
|
2023-08-30 17:31:07 +02:00
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
|
|
|
|
const struct phylink_link_state *state)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
return priv->info->mac_port_config(ds, port, mode, state->interface);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct phylink_pcs *
|
|
|
|
mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
|
|
|
|
phy_interface_t interface)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
switch (interface) {
|
|
|
|
case PHY_INTERFACE_MODE_TRGMII:
|
2023-10-24 12:59:35 +02:00
|
|
|
return &priv->pcs[port].pcs;
|
2023-08-30 17:31:07 +02:00
|
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
|
|
case PHY_INTERFACE_MODE_1000BASEX:
|
|
|
|
case PHY_INTERFACE_MODE_2500BASEX:
|
2023-10-24 12:59:35 +02:00
|
|
|
return priv->ports[port].sgmii_pcs;
|
2023-08-30 17:31:07 +02:00
|
|
|
default:
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
|
|
|
|
const struct phylink_link_state *state)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
u32 mcr_cur, mcr_new;
|
|
|
|
|
|
|
|
switch (port) {
|
|
|
|
case 0 ... 4: /* Internal phy */
|
2023-10-24 12:59:35 +02:00
|
|
|
if (state->interface != PHY_INTERFACE_MODE_GMII &&
|
|
|
|
state->interface != PHY_INTERFACE_MODE_INTERNAL)
|
2023-08-30 17:31:07 +02:00
|
|
|
goto unsupported;
|
|
|
|
break;
|
|
|
|
case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
|
|
|
|
if (priv->p5_interface == state->interface)
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (mt753x_mac_config(ds, port, mode, state) < 0)
|
|
|
|
goto unsupported;
|
|
|
|
|
|
|
|
if (priv->p5_intf_sel != P5_DISABLED)
|
|
|
|
priv->p5_interface = state->interface;
|
|
|
|
break;
|
|
|
|
case 6: /* 1st cpu port */
|
|
|
|
if (priv->p6_interface == state->interface)
|
|
|
|
break;
|
|
|
|
|
|
|
|
mt753x_pad_setup(ds, state);
|
|
|
|
|
|
|
|
if (mt753x_mac_config(ds, port, mode, state) < 0)
|
|
|
|
goto unsupported;
|
|
|
|
|
|
|
|
priv->p6_interface = state->interface;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
unsupported:
|
|
|
|
dev_err(ds->dev, "%s: unsupported %s port: %i\n",
|
|
|
|
__func__, phy_modes(state->interface), port);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
|
|
|
|
mcr_new = mcr_cur;
|
|
|
|
mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
|
|
|
|
mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
|
|
|
|
PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id);
|
|
|
|
|
|
|
|
/* Are we connected to external phy */
|
|
|
|
if (port == 5 && dsa_is_user_port(ds, 5))
|
|
|
|
mcr_new |= PMCR_EXT_PHY;
|
|
|
|
|
|
|
|
if (mcr_new != mcr_cur)
|
|
|
|
mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
|
|
|
|
unsigned int mode,
|
|
|
|
phy_interface_t interface)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs,
|
|
|
|
unsigned int mode,
|
|
|
|
phy_interface_t interface,
|
|
|
|
int speed, int duplex)
|
|
|
|
{
|
|
|
|
if (pcs->ops->pcs_link_up)
|
|
|
|
pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
|
|
|
|
unsigned int mode,
|
|
|
|
phy_interface_t interface,
|
|
|
|
struct phy_device *phydev,
|
|
|
|
int speed, int duplex,
|
|
|
|
bool tx_pause, bool rx_pause)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
u32 mcr;
|
|
|
|
|
|
|
|
mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
|
|
|
|
|
|
|
|
/* MT753x MAC works in 1G full duplex mode for all up-clocked
|
|
|
|
* variants.
|
|
|
|
*/
|
2023-10-24 12:59:35 +02:00
|
|
|
if (interface == PHY_INTERFACE_MODE_INTERNAL ||
|
|
|
|
interface == PHY_INTERFACE_MODE_TRGMII ||
|
2023-08-30 17:31:07 +02:00
|
|
|
(phy_interface_mode_is_8023z(interface))) {
|
|
|
|
speed = SPEED_1000;
|
|
|
|
duplex = DUPLEX_FULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (speed) {
|
|
|
|
case SPEED_1000:
|
|
|
|
mcr |= PMCR_FORCE_SPEED_1000;
|
|
|
|
break;
|
|
|
|
case SPEED_100:
|
|
|
|
mcr |= PMCR_FORCE_SPEED_100;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (duplex == DUPLEX_FULL) {
|
|
|
|
mcr |= PMCR_FORCE_FDX;
|
|
|
|
if (tx_pause)
|
|
|
|
mcr |= PMCR_TX_FC_EN;
|
|
|
|
if (rx_pause)
|
|
|
|
mcr |= PMCR_RX_FC_EN;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
|
|
|
|
switch (speed) {
|
|
|
|
case SPEED_1000:
|
|
|
|
mcr |= PMCR_FORCE_EEE1G;
|
|
|
|
break;
|
|
|
|
case SPEED_100:
|
|
|
|
mcr |= PMCR_FORCE_EEE100;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
mt7530_set(priv, MT7530_PMCR_P(port), mcr);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt7531_cpu_port_config(struct dsa_switch *ds, int port)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
phy_interface_t interface;
|
|
|
|
int speed;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
switch (port) {
|
|
|
|
case 5:
|
|
|
|
if (mt7531_is_rgmii_port(priv, port))
|
|
|
|
interface = PHY_INTERFACE_MODE_RGMII;
|
|
|
|
else
|
|
|
|
interface = PHY_INTERFACE_MODE_2500BASEX;
|
|
|
|
|
|
|
|
priv->p5_interface = interface;
|
|
|
|
break;
|
|
|
|
case 6:
|
|
|
|
interface = PHY_INTERFACE_MODE_2500BASEX;
|
|
|
|
|
|
|
|
priv->p6_interface = interface;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (interface == PHY_INTERFACE_MODE_2500BASEX)
|
|
|
|
speed = SPEED_2500;
|
|
|
|
else
|
|
|
|
speed = SPEED_1000;
|
|
|
|
|
|
|
|
ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
mt7530_write(priv, MT7530_PMCR_P(port),
|
|
|
|
PMCR_CPU_PORT_SETTING(priv->id));
|
|
|
|
mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED,
|
|
|
|
interface, speed, DUPLEX_FULL);
|
|
|
|
mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
|
|
|
|
speed, DUPLEX_FULL, true, true);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static int
|
|
|
|
mt7988_cpu_port_config(struct dsa_switch *ds, int port)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
mt7530_write(priv, MT7530_PMCR_P(port),
|
|
|
|
PMCR_CPU_PORT_SETTING(priv->id));
|
|
|
|
|
|
|
|
mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED,
|
|
|
|
PHY_INTERFACE_MODE_INTERNAL, NULL,
|
|
|
|
SPEED_10000, DUPLEX_FULL, true, true);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
|
|
|
|
struct phylink_config *config)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
/* This switch only supports full-duplex at 1Gbps */
|
|
|
|
config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
|
|
|
|
MAC_10 | MAC_100 | MAC_1000FD;
|
|
|
|
|
|
|
|
/* This driver does not make use of the speed, duplex, pause or the
|
|
|
|
* advertisement in its mac_config, so it is safe to mark this driver
|
|
|
|
* as non-legacy.
|
|
|
|
*/
|
|
|
|
config->legacy_pre_march2020 = false;
|
|
|
|
|
|
|
|
priv->info->mac_port_get_caps(ds, port, config);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt753x_pcs_validate(struct phylink_pcs *pcs,
|
|
|
|
unsigned long *supported,
|
|
|
|
const struct phylink_link_state *state)
|
|
|
|
{
|
|
|
|
/* Autonegotiation is not supported in TRGMII nor 802.3z modes */
|
|
|
|
if (state->interface == PHY_INTERFACE_MODE_TRGMII ||
|
|
|
|
phy_interface_mode_is_8023z(state->interface))
|
|
|
|
phylink_clear(supported, Autoneg);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mt7530_pcs_get_state(struct phylink_pcs *pcs,
|
|
|
|
struct phylink_link_state *state)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
|
|
|
|
int port = pcs_to_mt753x_pcs(pcs)->port;
|
|
|
|
u32 pmsr;
|
|
|
|
|
|
|
|
pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
|
|
|
|
|
|
|
|
state->link = (pmsr & PMSR_LINK);
|
|
|
|
state->an_complete = state->link;
|
|
|
|
state->duplex = !!(pmsr & PMSR_DPX);
|
|
|
|
|
|
|
|
switch (pmsr & PMSR_SPEED_MASK) {
|
|
|
|
case PMSR_SPEED_10:
|
|
|
|
state->speed = SPEED_10;
|
|
|
|
break;
|
|
|
|
case PMSR_SPEED_100:
|
|
|
|
state->speed = SPEED_100;
|
|
|
|
break;
|
|
|
|
case PMSR_SPEED_1000:
|
|
|
|
state->speed = SPEED_1000;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
state->speed = SPEED_UNKNOWN;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
state->pause &= ~(MLO_PAUSE_RX | MLO_PAUSE_TX);
|
|
|
|
if (pmsr & PMSR_RX_FC)
|
|
|
|
state->pause |= MLO_PAUSE_RX;
|
|
|
|
if (pmsr & PMSR_TX_FC)
|
|
|
|
state->pause |= MLO_PAUSE_TX;
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
|
2023-08-30 17:31:07 +02:00
|
|
|
phy_interface_t interface,
|
|
|
|
const unsigned long *advertising,
|
|
|
|
bool permit_pause_to_mac)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mt7530_pcs_an_restart(struct phylink_pcs *pcs)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct phylink_pcs_ops mt7530_pcs_ops = {
|
|
|
|
.pcs_validate = mt753x_pcs_validate,
|
|
|
|
.pcs_get_state = mt7530_pcs_get_state,
|
|
|
|
.pcs_config = mt753x_pcs_config,
|
|
|
|
.pcs_an_restart = mt7530_pcs_an_restart,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
mt753x_setup(struct dsa_switch *ds)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
int i, ret;
|
|
|
|
|
|
|
|
/* Initialise the PCS devices */
|
|
|
|
for (i = 0; i < priv->ds->num_ports; i++) {
|
|
|
|
priv->pcs[i].pcs.ops = priv->info->pcs_ops;
|
2023-10-24 12:59:35 +02:00
|
|
|
priv->pcs[i].pcs.neg_mode = true;
|
2023-08-30 17:31:07 +02:00
|
|
|
priv->pcs[i].priv = priv;
|
|
|
|
priv->pcs[i].port = i;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = priv->info->sw_setup(ds);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = mt7530_setup_irq(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = mt7530_setup_mdio(priv);
|
|
|
|
if (ret && priv->irq)
|
|
|
|
mt7530_free_irq_common(priv);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
if (priv->create_sgmii) {
|
|
|
|
ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
|
|
|
|
if (ret && priv->irq)
|
|
|
|
mt7530_free_irq(priv);
|
|
|
|
}
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt753x_get_mac_eee(struct dsa_switch *ds, int port,
|
|
|
|
struct ethtool_eee *e)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
|
|
|
|
|
|
|
|
e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
|
|
|
|
e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt753x_set_mac_eee(struct dsa_switch *ds, int port,
|
|
|
|
struct ethtool_eee *e)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN;
|
|
|
|
|
|
|
|
if (e->tx_lpi_timer > 0xFFF)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
set = SET_LPI_THRESH(e->tx_lpi_timer);
|
|
|
|
if (!e->tx_lpi_enabled)
|
|
|
|
/* Force LPI Mode without a delay */
|
|
|
|
set |= LPI_MODE_EN;
|
|
|
|
mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mt7988_setup(struct dsa_switch *ds)
|
|
|
|
{
|
|
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
|
|
|
|
/* Reset the switch */
|
|
|
|
reset_control_assert(priv->rstc);
|
|
|
|
usleep_range(20, 50);
|
|
|
|
reset_control_deassert(priv->rstc);
|
|
|
|
usleep_range(20, 50);
|
|
|
|
|
|
|
|
/* Reset the switch PHYs */
|
|
|
|
mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
|
|
|
|
|
|
|
|
return mt7531_setup_common(ds);
|
|
|
|
}
|
|
|
|
|
|
|
|
const struct dsa_switch_ops mt7530_switch_ops = {
|
2023-08-30 17:31:07 +02:00
|
|
|
.get_tag_protocol = mtk_get_tag_protocol,
|
|
|
|
.setup = mt753x_setup,
|
2023-10-24 12:59:35 +02:00
|
|
|
.preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port,
|
2023-08-30 17:31:07 +02:00
|
|
|
.get_strings = mt7530_get_strings,
|
|
|
|
.get_ethtool_stats = mt7530_get_ethtool_stats,
|
|
|
|
.get_sset_count = mt7530_get_sset_count,
|
|
|
|
.set_ageing_time = mt7530_set_ageing_time,
|
|
|
|
.port_enable = mt7530_port_enable,
|
|
|
|
.port_disable = mt7530_port_disable,
|
|
|
|
.port_change_mtu = mt7530_port_change_mtu,
|
|
|
|
.port_max_mtu = mt7530_port_max_mtu,
|
|
|
|
.port_stp_state_set = mt7530_stp_state_set,
|
|
|
|
.port_pre_bridge_flags = mt7530_port_pre_bridge_flags,
|
|
|
|
.port_bridge_flags = mt7530_port_bridge_flags,
|
|
|
|
.port_bridge_join = mt7530_port_bridge_join,
|
|
|
|
.port_bridge_leave = mt7530_port_bridge_leave,
|
|
|
|
.port_fdb_add = mt7530_port_fdb_add,
|
|
|
|
.port_fdb_del = mt7530_port_fdb_del,
|
|
|
|
.port_fdb_dump = mt7530_port_fdb_dump,
|
|
|
|
.port_mdb_add = mt7530_port_mdb_add,
|
|
|
|
.port_mdb_del = mt7530_port_mdb_del,
|
|
|
|
.port_vlan_filtering = mt7530_port_vlan_filtering,
|
|
|
|
.port_vlan_add = mt7530_port_vlan_add,
|
|
|
|
.port_vlan_del = mt7530_port_vlan_del,
|
|
|
|
.port_mirror_add = mt753x_port_mirror_add,
|
|
|
|
.port_mirror_del = mt753x_port_mirror_del,
|
|
|
|
.phylink_get_caps = mt753x_phylink_get_caps,
|
|
|
|
.phylink_mac_select_pcs = mt753x_phylink_mac_select_pcs,
|
|
|
|
.phylink_mac_config = mt753x_phylink_mac_config,
|
|
|
|
.phylink_mac_link_down = mt753x_phylink_mac_link_down,
|
|
|
|
.phylink_mac_link_up = mt753x_phylink_mac_link_up,
|
|
|
|
.get_mac_eee = mt753x_get_mac_eee,
|
|
|
|
.set_mac_eee = mt753x_set_mac_eee,
|
|
|
|
};
|
2023-10-24 12:59:35 +02:00
|
|
|
EXPORT_SYMBOL_GPL(mt7530_switch_ops);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
const struct mt753x_info mt753x_table[] = {
|
2023-08-30 17:31:07 +02:00
|
|
|
[ID_MT7621] = {
|
|
|
|
.id = ID_MT7621,
|
|
|
|
.pcs_ops = &mt7530_pcs_ops,
|
|
|
|
.sw_setup = mt7530_setup,
|
|
|
|
.phy_read_c22 = mt7530_phy_read_c22,
|
|
|
|
.phy_write_c22 = mt7530_phy_write_c22,
|
|
|
|
.phy_read_c45 = mt7530_phy_read_c45,
|
|
|
|
.phy_write_c45 = mt7530_phy_write_c45,
|
|
|
|
.pad_setup = mt7530_pad_clk_setup,
|
|
|
|
.mac_port_get_caps = mt7530_mac_port_get_caps,
|
|
|
|
.mac_port_config = mt7530_mac_config,
|
|
|
|
},
|
|
|
|
[ID_MT7530] = {
|
|
|
|
.id = ID_MT7530,
|
|
|
|
.pcs_ops = &mt7530_pcs_ops,
|
|
|
|
.sw_setup = mt7530_setup,
|
|
|
|
.phy_read_c22 = mt7530_phy_read_c22,
|
|
|
|
.phy_write_c22 = mt7530_phy_write_c22,
|
|
|
|
.phy_read_c45 = mt7530_phy_read_c45,
|
|
|
|
.phy_write_c45 = mt7530_phy_write_c45,
|
|
|
|
.pad_setup = mt7530_pad_clk_setup,
|
|
|
|
.mac_port_get_caps = mt7530_mac_port_get_caps,
|
|
|
|
.mac_port_config = mt7530_mac_config,
|
|
|
|
},
|
|
|
|
[ID_MT7531] = {
|
|
|
|
.id = ID_MT7531,
|
2023-10-24 12:59:35 +02:00
|
|
|
.pcs_ops = &mt7530_pcs_ops,
|
2023-08-30 17:31:07 +02:00
|
|
|
.sw_setup = mt7531_setup,
|
|
|
|
.phy_read_c22 = mt7531_ind_c22_phy_read,
|
|
|
|
.phy_write_c22 = mt7531_ind_c22_phy_write,
|
|
|
|
.phy_read_c45 = mt7531_ind_c45_phy_read,
|
|
|
|
.phy_write_c45 = mt7531_ind_c45_phy_write,
|
|
|
|
.pad_setup = mt7531_pad_setup,
|
|
|
|
.cpu_port_config = mt7531_cpu_port_config,
|
|
|
|
.mac_port_get_caps = mt7531_mac_port_get_caps,
|
|
|
|
.mac_port_config = mt7531_mac_config,
|
|
|
|
},
|
2023-10-24 12:59:35 +02:00
|
|
|
[ID_MT7988] = {
|
|
|
|
.id = ID_MT7988,
|
|
|
|
.pcs_ops = &mt7530_pcs_ops,
|
|
|
|
.sw_setup = mt7988_setup,
|
|
|
|
.phy_read_c22 = mt7531_ind_c22_phy_read,
|
|
|
|
.phy_write_c22 = mt7531_ind_c22_phy_write,
|
|
|
|
.phy_read_c45 = mt7531_ind_c45_phy_read,
|
|
|
|
.phy_write_c45 = mt7531_ind_c45_phy_write,
|
|
|
|
.pad_setup = mt7988_pad_setup,
|
|
|
|
.cpu_port_config = mt7988_cpu_port_config,
|
|
|
|
.mac_port_get_caps = mt7988_mac_port_get_caps,
|
|
|
|
.mac_port_config = mt7988_mac_config,
|
|
|
|
},
|
2023-08-30 17:31:07 +02:00
|
|
|
};
|
2023-10-24 12:59:35 +02:00
|
|
|
EXPORT_SYMBOL_GPL(mt753x_table);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
int
|
|
|
|
mt7530_probe_common(struct mt7530_priv *priv)
|
2023-08-30 17:31:07 +02:00
|
|
|
{
|
2023-10-24 12:59:35 +02:00
|
|
|
struct device *dev = priv->dev;
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
|
2023-08-30 17:31:07 +02:00
|
|
|
if (!priv->ds)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
priv->ds->dev = dev;
|
2023-08-30 17:31:07 +02:00
|
|
|
priv->ds->num_ports = MT7530_NUM_PORTS;
|
|
|
|
|
|
|
|
/* Get the hardware identifier from the devicetree node.
|
|
|
|
* We will need it for some of the clock and regulator setup.
|
|
|
|
*/
|
2023-10-24 12:59:35 +02:00
|
|
|
priv->info = of_device_get_match_data(dev);
|
2023-08-30 17:31:07 +02:00
|
|
|
if (!priv->info)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* Sanity check if these required device operations are filled
|
|
|
|
* properly.
|
|
|
|
*/
|
|
|
|
if (!priv->info->sw_setup || !priv->info->pad_setup ||
|
|
|
|
!priv->info->phy_read_c22 || !priv->info->phy_write_c22 ||
|
|
|
|
!priv->info->mac_port_get_caps ||
|
|
|
|
!priv->info->mac_port_config)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
priv->id = priv->info->id;
|
2023-10-24 12:59:35 +02:00
|
|
|
priv->dev = dev;
|
2023-08-30 17:31:07 +02:00
|
|
|
priv->ds->priv = priv;
|
|
|
|
priv->ds->ops = &mt7530_switch_ops;
|
|
|
|
mutex_init(&priv->reg_mutex);
|
2023-10-24 12:59:35 +02:00
|
|
|
dev_set_drvdata(dev, priv);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
return 0;
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
2023-10-24 12:59:35 +02:00
|
|
|
EXPORT_SYMBOL_GPL(mt7530_probe_common);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
void
|
|
|
|
mt7530_remove_common(struct mt7530_priv *priv)
|
2023-08-30 17:31:07 +02:00
|
|
|
{
|
|
|
|
if (priv->irq)
|
|
|
|
mt7530_free_irq(priv);
|
|
|
|
|
|
|
|
dsa_unregister_switch(priv->ds);
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
mutex_destroy(&priv->reg_mutex);
|
2023-08-30 17:31:07 +02:00
|
|
|
}
|
2023-10-24 12:59:35 +02:00
|
|
|
EXPORT_SYMBOL_GPL(mt7530_remove_common);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
|
|
|
|
MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
|
|
|
|
MODULE_LICENSE("GPL");
|