116 lines
3.1 KiB
YAML
116 lines
3.1 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Thine Electronics THC63LVD1024 LVDS Decoder
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Jacopo Mondi <jacopo+renesas@jmondi.org>
|
||
|
|
- Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
|
||
|
|
streams to parallel data outputs. The chip supports single/dual input/output
|
||
|
|
modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
|
||
|
|
outputs.
|
||
|
|
|
||
|
|
Single or dual operation mode, output data mapping and DDR output modes are
|
||
|
|
configured through input signals and the chip does not expose any control
|
||
|
|
bus.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: thine,thc63lvd1024
|
||
|
|
|
||
|
|
ports:
|
||
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
||
|
|
description: |
|
||
|
|
The device can operate in single or dual input and output modes.
|
||
|
|
|
||
|
|
When operating in single input mode, all pixels are received on port@0,
|
||
|
|
and port@1 shall not contain any endpoint. In dual input mode,
|
||
|
|
even-numbered pixels are received on port@0 and odd-numbered pixels on
|
||
|
|
port@1, and both port@0 and port@1 shall contain endpoints.
|
||
|
|
|
||
|
|
When operating in single output mode all pixels are output from the first
|
||
|
|
CMOS/TTL port and port@3 shall not contain any endpoint. In dual output
|
||
|
|
mode pixels are output from both CMOS/TTL ports and both port@2 and
|
||
|
|
port@3 shall contain endpoints.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
port@0:
|
||
|
|
$ref: /schemas/graph.yaml#/properties/port
|
||
|
|
description: First LVDS input port
|
||
|
|
|
||
|
|
port@1:
|
||
|
|
$ref: /schemas/graph.yaml#/properties/port
|
||
|
|
description: Second LVDS input port
|
||
|
|
|
||
|
|
port@2:
|
||
|
|
$ref: /schemas/graph.yaml#/properties/port
|
||
|
|
description: First digital CMOS/TTL parallel output
|
||
|
|
|
||
|
|
port@3:
|
||
|
|
$ref: /schemas/graph.yaml#/properties/port
|
||
|
|
description: Second digital CMOS/TTL parallel output
|
||
|
|
|
||
|
|
required:
|
||
|
|
- port@0
|
||
|
|
- port@2
|
||
|
|
|
||
|
|
oe-gpios:
|
||
|
|
maxItems: 1
|
||
|
|
description: Output enable GPIO signal, pin name "OE", active high.
|
||
|
|
|
||
|
|
powerdown-gpios:
|
||
|
|
maxItems: 1
|
||
|
|
description: Power down GPIO signal, pin name "/PDWN", active low.
|
||
|
|
|
||
|
|
vcc-supply:
|
||
|
|
description:
|
||
|
|
Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
|
||
|
|
digital circuitry.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- ports
|
||
|
|
- vcc-supply
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
|
||
|
|
lvds-decoder {
|
||
|
|
compatible = "thine,thc63lvd1024";
|
||
|
|
|
||
|
|
vcc-supply = <®_lvds_vcc>;
|
||
|
|
powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
lvds_dec_in_0: endpoint {
|
||
|
|
remote-endpoint = <&lvds_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port@2 {
|
||
|
|
reg = <2>;
|
||
|
|
|
||
|
|
lvds_dec_out_2: endpoint {
|
||
|
|
remote-endpoint = <&adv7511_in>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
...
|