227 lines
6.4 KiB
YAML
227 lines
6.4 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0-only
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Samsung Exynos SoC HDMI
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Inki Dae <inki.dae@samsung.com>
|
||
|
|
- Seung-Woo Kim <sw0312.kim@samsung.com>
|
||
|
|
- Kyungmin Park <kyungmin.park@samsung.com>
|
||
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- samsung,exynos4210-hdmi
|
||
|
|
- samsung,exynos4212-hdmi
|
||
|
|
- samsung,exynos5420-hdmi
|
||
|
|
- samsung,exynos5433-hdmi
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
minItems: 5
|
||
|
|
maxItems: 10
|
||
|
|
|
||
|
|
clock-names:
|
||
|
|
minItems: 5
|
||
|
|
maxItems: 10
|
||
|
|
|
||
|
|
ddc:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
||
|
|
description:
|
||
|
|
Phandle to the HDMI DDC node.
|
||
|
|
|
||
|
|
hdmi-en-supply:
|
||
|
|
description:
|
||
|
|
Provides voltage source for DCC lines available on HDMI connector. When
|
||
|
|
there is no power provided for DDC epprom, some TV-sets do not pulls up
|
||
|
|
HPD (hot plug detect) line, what causes HDMI block to stay turned off.
|
||
|
|
When provided, the regulator allows TV-set correctly signal HPD event.
|
||
|
|
|
||
|
|
hpd-gpios:
|
||
|
|
maxItems: 1
|
||
|
|
description:
|
||
|
|
A GPIO line connected to HPD
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
phy:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
||
|
|
description: Phandle to the HDMI PHY node.
|
||
|
|
|
||
|
|
ports:
|
||
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
||
|
|
description:
|
||
|
|
Contains a port which is connected to mic node.
|
||
|
|
|
||
|
|
power-domains:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
samsung,syscon-phandle:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
||
|
|
description:
|
||
|
|
Phandle to the PMU system controller node.
|
||
|
|
|
||
|
|
samsung,sysreg-phandle:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
||
|
|
description:
|
||
|
|
Phandle to DISP system controller interface.
|
||
|
|
|
||
|
|
'#sound-dai-cells':
|
||
|
|
const: 0
|
||
|
|
|
||
|
|
vdd-supply:
|
||
|
|
description:
|
||
|
|
VDD 1.0V HDMI TX.
|
||
|
|
|
||
|
|
vdd_osc-supply:
|
||
|
|
description:
|
||
|
|
VDD 1.8V HDMI OSC.
|
||
|
|
|
||
|
|
vdd_pll-supply:
|
||
|
|
description:
|
||
|
|
VDD 1.0V HDMI PLL.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- clocks
|
||
|
|
- clock-names
|
||
|
|
- ddc
|
||
|
|
- hpd-gpios
|
||
|
|
- interrupts
|
||
|
|
- phy
|
||
|
|
- reg
|
||
|
|
- samsung,syscon-phandle
|
||
|
|
- '#sound-dai-cells'
|
||
|
|
- vdd-supply
|
||
|
|
- vdd_osc-supply
|
||
|
|
- vdd_pll-supply
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- if:
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
contains:
|
||
|
|
const: samsung,exynos5433-hdmi
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
clocks:
|
||
|
|
items:
|
||
|
|
- description: Gate of HDMI IP APB bus.
|
||
|
|
- description: Gate of HDMI-PHY IP APB bus.
|
||
|
|
- description: Gate of HDMI TMDS clock.
|
||
|
|
- description: Gate of HDMI pixel clock.
|
||
|
|
- description: TMDS clock generated by HDMI-PHY.
|
||
|
|
- description: MUX used to switch between oscclk and tmds_clko,
|
||
|
|
respectively if HDMI-PHY is off and operational.
|
||
|
|
- description: Pixel clock generated by HDMI-PHY.
|
||
|
|
- description: MUX used to switch between oscclk and pixel_clko,
|
||
|
|
respectively if HDMI-PHY is off and operational.
|
||
|
|
- description: Oscillator clock, used as parent of following *_user
|
||
|
|
clocks in case HDMI-PHY is not operational.
|
||
|
|
- description: Gate of HDMI SPDIF clock.
|
||
|
|
clock-names:
|
||
|
|
items:
|
||
|
|
- const: hdmi_pclk
|
||
|
|
- const: hdmi_i_pclk
|
||
|
|
- const: i_tmds_clk
|
||
|
|
- const: i_pixel_clk
|
||
|
|
- const: tmds_clko
|
||
|
|
- const: tmds_clko_user
|
||
|
|
- const: pixel_clko
|
||
|
|
- const: pixel_clko_user
|
||
|
|
- const: oscclk
|
||
|
|
- const: i_spdif_clk
|
||
|
|
required:
|
||
|
|
- samsung,sysreg-phandle
|
||
|
|
else:
|
||
|
|
properties:
|
||
|
|
clocks:
|
||
|
|
items:
|
||
|
|
- description: Gate of HDMI IP bus clock.
|
||
|
|
- description: Gate of HDMI special clock.
|
||
|
|
- description: Pixel special clock, one of the two possible inputs
|
||
|
|
of HDMI clock mux.
|
||
|
|
- description: HDMI PHY clock output, one of two possible inputs of
|
||
|
|
HDMI clock mux.
|
||
|
|
- description: It is required by the driver to switch between the 2
|
||
|
|
parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
|
||
|
|
after configuration, parent is set to sclk_hdmiphy else
|
||
|
|
sclk_pixel.
|
||
|
|
clock-names:
|
||
|
|
items:
|
||
|
|
- const: hdmi
|
||
|
|
- const: sclk_hdmi
|
||
|
|
- const: sclk_pixel
|
||
|
|
- const: sclk_hdmiphy
|
||
|
|
- const: mout_hdmi
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/clock/exynos5433.h>
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
|
||
|
|
hdmi@13970000 {
|
||
|
|
compatible = "samsung,exynos5433-hdmi";
|
||
|
|
reg = <0x13970000 0x70000>;
|
||
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
clocks = <&cmu_disp CLK_PCLK_HDMI>,
|
||
|
|
<&cmu_disp CLK_PCLK_HDMIPHY>,
|
||
|
|
<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
|
||
|
|
<&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
|
||
|
|
<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
|
||
|
|
<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
|
||
|
|
<&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
|
||
|
|
<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
|
||
|
|
<&xxti>,
|
||
|
|
<&cmu_disp CLK_SCLK_HDMI_SPDIF>;
|
||
|
|
clock-names = "hdmi_pclk",
|
||
|
|
"hdmi_i_pclk",
|
||
|
|
"i_tmds_clk",
|
||
|
|
"i_pixel_clk",
|
||
|
|
"tmds_clko",
|
||
|
|
"tmds_clko_user",
|
||
|
|
"pixel_clko",
|
||
|
|
"pixel_clko_user",
|
||
|
|
"oscclk",
|
||
|
|
"i_spdif_clk";
|
||
|
|
phy = <&hdmiphy>;
|
||
|
|
ddc = <&hsi2c_11>;
|
||
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
||
|
|
samsung,sysreg-phandle = <&syscon_disp>;
|
||
|
|
#sound-dai-cells = <0>;
|
||
|
|
|
||
|
|
hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
|
||
|
|
vdd-supply = <&ldo6_reg>;
|
||
|
|
vdd_osc-supply = <&ldo7_reg>;
|
||
|
|
vdd_pll-supply = <&ldo6_reg>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
hdmi_to_tv: endpoint {
|
||
|
|
remote-endpoint = <&tv_to_hdmi>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
hdmi_to_mhl: endpoint {
|
||
|
|
remote-endpoint = <&mhl_to_hdmi>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|