131 lines
2.7 KiB
YAML
131 lines
2.7 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
%YAML 1.2
|
||
|
---
|
||
|
$id: http://devicetree.org/schemas/iio/imu/adi,adis16475.yaml#
|
||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
||
|
title: Analog Devices ADIS16475 and similar IMUs
|
||
|
|
||
|
maintainers:
|
||
|
- Nuno Sá <nuno.sa@analog.com>
|
||
|
|
||
|
description: |
|
||
|
Analog Devices ADIS16475 and similar IMUs
|
||
|
https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16475.pdf
|
||
|
|
||
|
properties:
|
||
|
compatible:
|
||
|
enum:
|
||
|
- adi,adis16475-1
|
||
|
- adi,adis16475-2
|
||
|
- adi,adis16475-3
|
||
|
- adi,adis16477-1
|
||
|
- adi,adis16477-2
|
||
|
- adi,adis16477-3
|
||
|
- adi,adis16470
|
||
|
- adi,adis16465-1
|
||
|
- adi,adis16465-2
|
||
|
- adi,adis16465-3
|
||
|
- adi,adis16467-1
|
||
|
- adi,adis16467-2
|
||
|
- adi,adis16467-3
|
||
|
- adi,adis16500
|
||
|
- adi,adis16505-1
|
||
|
- adi,adis16505-2
|
||
|
- adi,adis16505-3
|
||
|
- adi,adis16507-1
|
||
|
- adi,adis16507-2
|
||
|
- adi,adis16507-3
|
||
|
|
||
|
reg:
|
||
|
maxItems: 1
|
||
|
|
||
|
spi-cpha: true
|
||
|
|
||
|
spi-cpol: true
|
||
|
|
||
|
spi-max-frequency:
|
||
|
maximum: 2000000
|
||
|
|
||
|
interrupts:
|
||
|
maxItems: 1
|
||
|
|
||
|
clocks:
|
||
|
maxItems: 1
|
||
|
|
||
|
reset-gpios:
|
||
|
description:
|
||
|
Must be the device tree identifier of the RESET pin. If specified,
|
||
|
it will be asserted during driver probe. As the line is active low,
|
||
|
it should be marked GPIO_ACTIVE_LOW.
|
||
|
maxItems: 1
|
||
|
|
||
|
adi,sync-mode:
|
||
|
description:
|
||
|
Configures the device SYNC pin. The following modes are supported
|
||
|
0 - output_sync
|
||
|
1 - direct_sync
|
||
|
2 - scaled_sync
|
||
|
3 - pulse_sync
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
minimum: 0
|
||
|
maximum: 3
|
||
|
|
||
|
required:
|
||
|
- compatible
|
||
|
- reg
|
||
|
- interrupts
|
||
|
- spi-cpha
|
||
|
- spi-cpol
|
||
|
|
||
|
allOf:
|
||
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||
|
- if:
|
||
|
properties:
|
||
|
compatible:
|
||
|
contains:
|
||
|
enum:
|
||
|
- adi,adis16500
|
||
|
- adi,adis16505-1
|
||
|
- adi,adis16505-2
|
||
|
- adi,adis16505-3
|
||
|
- adi,adis16507-1
|
||
|
- adi,adis16507-2
|
||
|
- adi,adis16507-3
|
||
|
|
||
|
then:
|
||
|
properties:
|
||
|
adi,sync-mode:
|
||
|
minimum: 0
|
||
|
maximum: 2
|
||
|
|
||
|
- if:
|
||
|
properties:
|
||
|
adi,sync-mode:
|
||
|
enum: [1, 2, 3]
|
||
|
|
||
|
then:
|
||
|
dependencies:
|
||
|
adi,sync-mode: [ clocks ]
|
||
|
|
||
|
unevaluatedProperties: false
|
||
|
|
||
|
examples:
|
||
|
- |
|
||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
spi {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
adis16475: adis16475-3@0 {
|
||
|
compatible = "adi,adis16475-3";
|
||
|
reg = <0>;
|
||
|
spi-cpha;
|
||
|
spi-cpol;
|
||
|
spi-max-frequency = <2000000>;
|
||
|
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
|
||
|
interrupt-parent = <&gpio>;
|
||
|
};
|
||
|
};
|
||
|
...
|