50 lines
1.2 KiB
YAML
50 lines
1.2 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Kinetic Technologies KTD253 and KTD259 one-wire backlight
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
The Kinetic Technologies KTD253 and KTD259 are white LED backlights
|
||
|
|
controlled by a single GPIO line. If you just turn on the backlight
|
||
|
|
it goes to maximum backlight then you can set the level of backlight
|
||
|
|
using pulses on the enable wire. This is sometimes referred to as
|
||
|
|
"expresswire".
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: common.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
items:
|
||
|
|
- enum:
|
||
|
|
- kinetic,ktd253
|
||
|
|
- kinetic,ktd259
|
||
|
|
|
||
|
|
enable-gpios:
|
||
|
|
description: GPIO to use to enable/disable and dim the backlight.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
default-brightness: true
|
||
|
|
max-brightness: true
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- enable-gpios
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
backlight {
|
||
|
|
compatible = "kinetic,ktd253";
|
||
|
|
enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
|
||
|
|
default-brightness = <13>;
|
||
|
|
};
|