106 lines
3.2 KiB
YAML
106 lines
3.2 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
|
||
|
|
Circuit (MUIC).
|
||
|
|
|
||
|
|
There are two LED outputs available - FLED1 and FLED2. Each of them can
|
||
|
|
control a separate LED or they can be connected together to double the
|
||
|
|
maximum current for a single connected LED. One LED is represented by one
|
||
|
|
child node.
|
||
|
|
|
||
|
|
See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
|
||
|
|
additional information and example.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: maxim,max77693-led
|
||
|
|
|
||
|
|
maxim,boost-mode:
|
||
|
|
description:
|
||
|
|
In boost mode the device can produce up to 1.2A of total current on both
|
||
|
|
outputs. The maximum current on each output is reduced to 625mA then. If
|
||
|
|
not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
|
||
|
|
case both current sources are used.
|
||
|
|
See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
enum: [0, 1, 2]
|
||
|
|
|
||
|
|
maxim,boost-mvout:
|
||
|
|
description: |
|
||
|
|
Output voltage of the boost module in millivolts.
|
||
|
|
Valid values: 3300 - 5500, step by 25 (rounded down)
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
minimum: 3300
|
||
|
|
maximum: 5500
|
||
|
|
default: 3300
|
||
|
|
|
||
|
|
maxim,mvsys-min:
|
||
|
|
description: |
|
||
|
|
Low input voltage level in millivolts. Flash is not fired if chip
|
||
|
|
estimates that system voltage could drop below this level due to flash
|
||
|
|
power consumption.
|
||
|
|
Valid values: 2400 - 3400, step by 33 (rounded down)
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
minimum: 2400
|
||
|
|
maximum: 3400
|
||
|
|
default: 2400
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
"^([a-z]+-)?led[01]?$":
|
||
|
|
type: object
|
||
|
|
$ref: common.yaml#
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
properties:
|
||
|
|
led-sources:
|
||
|
|
allOf:
|
||
|
|
- minItems: 1
|
||
|
|
maxItems: 2
|
||
|
|
items:
|
||
|
|
minimum: 0
|
||
|
|
maximum: 1
|
||
|
|
|
||
|
|
led-max-microamp:
|
||
|
|
description: |
|
||
|
|
Valid values for a LED connected to one FLED output:
|
||
|
|
15625 - 250000, step by 15625 (rounded down)
|
||
|
|
Valid values for a LED connected to both FLED outputs:
|
||
|
|
15625 - 500000, step by 15625 (rounded down)
|
||
|
|
|
||
|
|
flash-max-microamp:
|
||
|
|
description: |
|
||
|
|
Valid values for a single LED connected to one FLED output
|
||
|
|
(boost mode must be turned off):
|
||
|
|
15625 - 1000000, step by 15625 (rounded down)
|
||
|
|
Valid values for a single LED connected to both FLED outputs:
|
||
|
|
15625 - 1250000, step by 15625 (rounded down)
|
||
|
|
Valid values for two LEDs case:
|
||
|
|
15625 - 625000, step by 15625 (rounded down)
|
||
|
|
|
||
|
|
flash-max-timeout-us:
|
||
|
|
description: |
|
||
|
|
Valid values: 62500 - 1000000, step by 62500 (rounded down)
|
||
|
|
minimum: 62500
|
||
|
|
maximum: 1000000
|
||
|
|
|
||
|
|
required:
|
||
|
|
- flash-max-microamp
|
||
|
|
- flash-max-timeout-us
|
||
|
|
- led-max-microamp
|
||
|
|
- led-sources
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
|
||
|
|
additionalProperties: false
|