158 lines
4.0 KiB
YAML
158 lines
4.0 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: jedec,lpddr3-timings
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
description: |
|
||
|
|
Maximum DDR clock frequency for the speed-bin, in Hz.
|
||
|
|
Property is deprecated, use max-freq.
|
||
|
|
deprecated: true
|
||
|
|
|
||
|
|
max-freq:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Maximum DDR clock frequency for the speed-bin, in Hz.
|
||
|
|
|
||
|
|
min-freq:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Minimum DDR clock frequency for the speed-bin, in Hz.
|
||
|
|
|
||
|
|
tCKE:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
|
||
|
|
|
||
|
|
tCKESR:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
CKE minimum pulse width during SELF REFRESH (low pulse width during
|
||
|
|
SELF REFRESH) in pico seconds.
|
||
|
|
|
||
|
|
tFAW:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Four-bank activate window in pico seconds.
|
||
|
|
|
||
|
|
tMRD:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Mode register set command delay in pico seconds.
|
||
|
|
|
||
|
|
tR2R-C2C:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
|
||
|
|
|
||
|
|
tRAS:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Row active time in pico seconds.
|
||
|
|
|
||
|
|
tRC:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
ACTIVATE-to-ACTIVATE command period in pico seconds.
|
||
|
|
|
||
|
|
tRCD:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
RAS-to-CAS delay in pico seconds.
|
||
|
|
|
||
|
|
tRFC:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Refresh Cycle time in pico seconds.
|
||
|
|
|
||
|
|
tRPab:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Row precharge time (all banks) in pico seconds.
|
||
|
|
|
||
|
|
tRPpb:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Row precharge time (single banks) in pico seconds.
|
||
|
|
|
||
|
|
tRRD:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Active bank A to active bank B in pico seconds.
|
||
|
|
|
||
|
|
tRTP:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Internal READ to PRECHARGE command delay in pico seconds.
|
||
|
|
|
||
|
|
tW2W-C2C:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
|
||
|
|
|
||
|
|
tWR:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
WRITE recovery time in pico seconds.
|
||
|
|
|
||
|
|
tWTR:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Internal WRITE-to-READ command delay in pico seconds.
|
||
|
|
|
||
|
|
tXP:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Exit power-down to next valid command delay in pico seconds.
|
||
|
|
|
||
|
|
tXSR:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
SELF REFRESH exit to next valid command delay in pico seconds.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- min-freq
|
||
|
|
- max-freq
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
lpddr3 {
|
||
|
|
timings {
|
||
|
|
compatible = "jedec,lpddr3-timings";
|
||
|
|
max-freq = <800000000>;
|
||
|
|
min-freq = <100000000>;
|
||
|
|
tCKE = <3750>;
|
||
|
|
tCKESR = <3750>;
|
||
|
|
tFAW = <25000>;
|
||
|
|
tMRD = <7000>;
|
||
|
|
tR2R-C2C = <0>;
|
||
|
|
tRAS = <23000>;
|
||
|
|
tRC = <33750>;
|
||
|
|
tRCD = <10000>;
|
||
|
|
tRFC = <65000>;
|
||
|
|
tRPab = <12000>;
|
||
|
|
tRPpb = <12000>;
|
||
|
|
tRRD = <6000>;
|
||
|
|
tRTP = <3750>;
|
||
|
|
tW2W-C2C = <0>;
|
||
|
|
tWR = <7500>;
|
||
|
|
tWTR = <3750>;
|
||
|
|
tXP = <3750>;
|
||
|
|
tXSR = <70000>;
|
||
|
|
};
|
||
|
|
};
|