82 lines
2.5 KiB
YAML
82 lines
2.5 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Broadcom BCM4377 family PCIe Bluetooth Chips
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Sven Peter <sven@svenpeter.dev>
|
||
|
|
|
||
|
|
description:
|
||
|
|
This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
|
||
|
|
usually found in Apple machines. The Wi-Fi part of the chip is described in
|
||
|
|
bindings/net/wireless/brcm,bcm4329-fmac.yaml.
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: bluetooth-controller.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- pci14e4,5fa0 # BCM4377
|
||
|
|
- pci14e4,5f69 # BCM4378
|
||
|
|
- pci14e4,5f71 # BCM4387
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
brcm,board-type:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/string
|
||
|
|
description: Board type of the Bluetooth chip. This is used to decouple
|
||
|
|
the overall system board from the Bluetooth module and used to construct
|
||
|
|
firmware and calibration data filenames.
|
||
|
|
On Apple platforms, this should be the Apple module-instance codename
|
||
|
|
prefixed by "apple,", e.g. "apple,atlantisb".
|
||
|
|
pattern: '^apple,.*'
|
||
|
|
|
||
|
|
brcm,taurus-cal-blob:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||
|
|
description: A per-device calibration blob for the Bluetooth radio. This
|
||
|
|
should be filled in by the bootloader from platform configuration
|
||
|
|
data, if necessary, and will be uploaded to the device.
|
||
|
|
This blob is used if the chip stepping of the Bluetooth module does not
|
||
|
|
support beamforming.
|
||
|
|
|
||
|
|
brcm,taurus-bf-cal-blob:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||
|
|
description: A per-device calibration blob for the Bluetooth radio. This
|
||
|
|
should be filled in by the bootloader from platform configuration
|
||
|
|
data, if necessary, and will be uploaded to the device.
|
||
|
|
This blob is used if the chip stepping of the Bluetooth module supports
|
||
|
|
beamforming.
|
||
|
|
|
||
|
|
local-bd-address: true
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- local-bd-address
|
||
|
|
- brcm,board-type
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
pcie@a0000000 {
|
||
|
|
#address-cells = <3>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
reg = <0xa0000000 0x1000000>;
|
||
|
|
device_type = "pci";
|
||
|
|
ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>;
|
||
|
|
|
||
|
|
bluetooth@0,1 {
|
||
|
|
compatible = "pci14e4,5f69";
|
||
|
|
reg = <0x100 0x0 0x0 0x0 0x0>;
|
||
|
|
brcm,board-type = "apple,honshu";
|
||
|
|
/* To be filled by the bootloader */
|
||
|
|
local-bd-address = [00 00 00 00 00 00];
|
||
|
|
};
|
||
|
|
};
|