121 lines
2.8 KiB
YAML
121 lines
2.8 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Intel Thunder Bay pin controller
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
Intel Thunder Bay SoC integrates a pin controller which enables control
|
||
|
|
of pin directions, input/output values and configuration
|
||
|
|
for a total of 67 pins.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: intel,thunderbay-pinctrl
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
gpio-controller: true
|
||
|
|
|
||
|
|
'#gpio-cells':
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
gpio-ranges:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
description:
|
||
|
|
Specifies the interrupt lines to be used by the controller.
|
||
|
|
maxItems: 2
|
||
|
|
|
||
|
|
interrupt-controller: true
|
||
|
|
|
||
|
|
'#interrupt-cells':
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
'^gpio@[0-9a-f]*$':
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
description:
|
||
|
|
Child nodes can be specified to contain pin configuration information,
|
||
|
|
which can then be utilized by pinctrl client devices.
|
||
|
|
The following properties are supported.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
pins:
|
||
|
|
description: |
|
||
|
|
The name(s) of the pins to be configured in the child node.
|
||
|
|
Supported pin names are "GPIO0" up to "GPIO66".
|
||
|
|
|
||
|
|
bias-disable: true
|
||
|
|
|
||
|
|
bias-pull-down: true
|
||
|
|
|
||
|
|
bias-pull-up: true
|
||
|
|
|
||
|
|
drive-strength:
|
||
|
|
description: Drive strength for the pad.
|
||
|
|
enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
|
||
|
|
|
||
|
|
bias-bus-hold:
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
input-schmitt-enable:
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
slew-rate:
|
||
|
|
description: GPIO slew rate control.
|
||
|
|
0 - Slow
|
||
|
|
1 - Fast
|
||
|
|
enum: [0, 1]
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- gpio-controller
|
||
|
|
- '#gpio-cells'
|
||
|
|
- gpio-ranges
|
||
|
|
- interrupts
|
||
|
|
- interrupt-controller
|
||
|
|
- '#interrupt-cells'
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
// Example 1
|
||
|
|
pinctrl0: gpio@0 {
|
||
|
|
compatible = "intel,thunderbay-pinctrl";
|
||
|
|
reg = <0x600b0000 0x88>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <0x2>;
|
||
|
|
gpio-ranges = <&pinctrl0 0 0 67>;
|
||
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
// Example 2
|
||
|
|
pinctrl1: gpio@1 {
|
||
|
|
compatible = "intel,thunderbay-pinctrl";
|
||
|
|
reg = <0x600c0000 0x88>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <0x2>;
|
||
|
|
gpio-ranges = <&pinctrl1 0 0 53>;
|
||
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
|
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
};
|