linux-zen-desktop/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,msm8974-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm MSM8974 TLMM pin controller

maintainers:
  - Bjorn Andersson <andersson@kernel.org>
  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

description:
  Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC.

properties:
  compatible:
    const: qcom,msm8974-pinctrl

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true
  "#gpio-cells": true
  gpio-ranges: true
  wakeup-parent: true

  gpio-reserved-ranges:
    minItems: 1
    maxItems: 73

  gpio-line-names:
    maxItems: 146

patternProperties:
  "-state$":
    oneOf:
      - $ref: "#/$defs/qcom-msm8974-tlmm-state"
      - patternProperties:
          "-pins$":
            $ref: "#/$defs/qcom-msm8974-tlmm-state"
        additionalProperties: false

$defs:
  qcom-msm8974-tlmm-state:
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.
    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
    unevaluatedProperties: false

    properties:
      pins:
        description:
          List of gpio pins affected by the properties specified in this
          subnode.
        items:
          oneOf:
            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
            - enum: [ hsic_data, hsic_strobe, sdc1_clk, sdc1_cmd, sdc1_data,
                      sdc2_clk, sdc2_cmd, sdc2_data ]
        minItems: 1
        maxItems: 36

      function:
        description:
          Specify the alternative function to be configured for the specified
          pins.

        enum: [ gpio, cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm,
                blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, blsp_uim2,
                blsp_uart2, blsp_i2c2, blsp_spi2, blsp_uim3, blsp_uart3,
                blsp_i2c3, blsp_spi3, blsp_uim4, blsp_uart4, blsp_i2c4,
                blsp_spi4, blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5,
                blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, blsp_uim7,
                blsp_uart7, blsp_i2c7, blsp_spi7, blsp_uim8, blsp_uart8,
                blsp_i2c8, blsp_spi8, blsp_uim9, blsp_uart9, blsp_i2c9,
                blsp_spi9, blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10,
                blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, blsp_uim12,
                blsp_uart12, blsp_i2c12, blsp_spi12, blsp_spi1_cs1,
                blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2
                blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
                sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0,
                cci_timer1, cci_timer2, cci_timer3, cci_async_in0,
                cci_async_in1, cci_async_in2, cam_mckl0, cam_mclk1, cam_mclk2,
                cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd,
                gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn,
                tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s,
                spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ]

    required:
      - pins

    allOf:
      - if:
          properties:
            pins:
              contains:
                enum:
                  - hsic_data
                  - hsic_strobe
          required:
            - pins
        then:
          properties:
            bias-pull-down: false
            bias-pull-up: false
            bias-disable: false
            drive-strength: false
            input-enable: false
            output-high: false
            output-low: false

allOf:
  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    tlmm: pinctrl@fd510000 {
        compatible = "qcom,msm8974-pinctrl";
        reg = <0xfd510000 0x4000>;
        gpio-controller;
        gpio-ranges = <&tlmm 0 0 146>;
        #gpio-cells = <2>;
        interrupt-controller;
        #interrupt-cells = <2>;
        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;

        sdc1-off-state {
            clk-pins {
                pins = "sdc1_clk";
                bias-disable;
                drive-strength = <2>;
            };

            cmd-pins {
                pins = "sdc1_cmd";
                bias-pull-up;
                drive-strength = <2>;
            };

            data-pins {
                pins = "sdc1_data";
                bias-pull-up;
                drive-strength = <2>;
            };
        };

        blsp2-uart1-sleep-state {
            pins = "gpio41", "gpio42", "gpio43", "gpio44";
            function = "gpio";
            drive-strength = <2>;
            bias-pull-down;
        };

        hsic-state {
            pins = "hsic_data", "hsic_strobe";
        };
    };