125 lines
2.9 KiB
YAML
125 lines
2.9 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-aon-pinctrl.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: StarFive JH7110 AON Pin Controller
|
||
|
|
|
||
|
|
description: |
|
||
|
|
Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
|
||
|
|
|
||
|
|
Out of the SoC's many pins only the ones named PAD_RGPIO0 to PAD_RGPIO3
|
||
|
|
can be multiplexed and have configurable bias, drive strength,
|
||
|
|
schmitt trigger etc.
|
||
|
|
Some peripherals such as PWM have their I/O go through the 4 "GPIOs".
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Jianlong Huang <jianlong.huang@starfivetech.com>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: starfive,jh7110-aon-pinctrl
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
resets:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupt-controller: true
|
||
|
|
|
||
|
|
'#interrupt-cells':
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
gpio-controller: true
|
||
|
|
|
||
|
|
'#gpio-cells':
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
'-[0-9]+$':
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
patternProperties:
|
||
|
|
'-pins$':
|
||
|
|
type: object
|
||
|
|
description: |
|
||
|
|
A pinctrl node should contain at least one subnode representing the
|
||
|
|
pinctrl groups available on the machine. Each subnode will list the
|
||
|
|
pins it needs, and how they should be configured, with regard to
|
||
|
|
muxer configuration, bias, input enable/disable, input schmitt
|
||
|
|
trigger enable/disable, slew-rate and drive strength.
|
||
|
|
allOf:
|
||
|
|
- $ref: /schemas/pinctrl/pincfg-node.yaml
|
||
|
|
- $ref: /schemas/pinctrl/pinmux-node.yaml
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
properties:
|
||
|
|
pinmux:
|
||
|
|
description: |
|
||
|
|
The list of GPIOs and their mux settings that properties in the
|
||
|
|
node apply to. This should be set using the GPIOMUX macro.
|
||
|
|
|
||
|
|
bias-disable: true
|
||
|
|
|
||
|
|
bias-pull-up:
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
bias-pull-down:
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
drive-strength:
|
||
|
|
enum: [ 2, 4, 8, 12 ]
|
||
|
|
|
||
|
|
input-enable: true
|
||
|
|
|
||
|
|
input-disable: true
|
||
|
|
|
||
|
|
input-schmitt-enable: true
|
||
|
|
|
||
|
|
input-schmitt-disable: true
|
||
|
|
|
||
|
|
slew-rate:
|
||
|
|
maximum: 1
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- interrupts
|
||
|
|
- interrupt-controller
|
||
|
|
- '#interrupt-cells'
|
||
|
|
- gpio-controller
|
||
|
|
- '#gpio-cells'
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
pinctrl@17020000 {
|
||
|
|
compatible = "starfive,jh7110-aon-pinctrl";
|
||
|
|
reg = <0x17020000 0x10000>;
|
||
|
|
resets = <&aoncrg 2>;
|
||
|
|
interrupts = <85>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
|
||
|
|
pwm-0 {
|
||
|
|
pwm-pins {
|
||
|
|
pinmux = <0xff030802>;
|
||
|
|
bias-disable;
|
||
|
|
drive-strength = <12>;
|
||
|
|
input-disable;
|
||
|
|
input-schmitt-disable;
|
||
|
|
slew-rate = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
...
|