83 lines
2.1 KiB
YAML
83 lines
2.1 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Richtek RT9467 Switching Battery Charger with Power Path Management
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- ChiYuan Huang <cy_huang@richtek.com>
|
||
|
|
- ChiaEn Wu <chiaen_wu@richtek.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
|
||
|
|
portable applications. It integrates a synchronous PWM controller, power
|
||
|
|
MOSFETs, input current sensing and regulation, high-accuracy voltage
|
||
|
|
regulation, and charge termination. The charge current is regulated through
|
||
|
|
integrated sensing resistors.
|
||
|
|
|
||
|
|
The RT9467 also features USB On-The-Go (OTG) support. It also integrates
|
||
|
|
D+/D- pin for USB host/charging port detection.
|
||
|
|
|
||
|
|
Datasheet is available at
|
||
|
|
https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: richtek,rt9467
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
wakeup-source: true
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
charge-enable-gpios:
|
||
|
|
description: GPIO is used to turn on and off charging.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
usb-otg-vbus-regulator:
|
||
|
|
type: object
|
||
|
|
description: OTG boost regulator.
|
||
|
|
unevaluatedProperties: false
|
||
|
|
$ref: /schemas/regulator/regulator.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
enable-gpios: true
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- wakeup-source
|
||
|
|
- interrupts
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
charger@5b {
|
||
|
|
compatible = "richtek,rt9467";
|
||
|
|
reg = <0x5b>;
|
||
|
|
wakeup-source;
|
||
|
|
interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
rt9467_otg_vbus: usb-otg-vbus-regulator {
|
||
|
|
regulator-name = "rt9467-usb-otg-vbus";
|
||
|
|
regulator-min-microvolt = <4425000>;
|
||
|
|
regulator-max-microvolt = <5825000>;
|
||
|
|
regulator-min-microamp = <500000>;
|
||
|
|
regulator-max-microamp = <3000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|