269 lines
7.6 KiB
YAML
269 lines
7.6 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Qualcomm SC7280 MSS Peripheral Image Loader
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Sibi Sankar <quic_sibis@quicinc.com>
|
||
|
|
|
||
|
|
description:
|
||
|
|
This document describes the hardware for a component that loads and boots firmware
|
||
|
|
on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- qcom,sc7280-mss-pil
|
||
|
|
|
||
|
|
reg:
|
||
|
|
items:
|
||
|
|
- description: MSS QDSP6 registers
|
||
|
|
- description: RMB registers
|
||
|
|
|
||
|
|
reg-names:
|
||
|
|
items:
|
||
|
|
- const: qdsp6
|
||
|
|
- const: rmb
|
||
|
|
|
||
|
|
iommus:
|
||
|
|
items:
|
||
|
|
- description: MSA Stream 1
|
||
|
|
- description: MSA Stream 2
|
||
|
|
|
||
|
|
interconnects:
|
||
|
|
items:
|
||
|
|
- description: Path leading to system memory
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
items:
|
||
|
|
- description: Watchdog interrupt
|
||
|
|
- description: Fatal interrupt
|
||
|
|
- description: Ready interrupt
|
||
|
|
- description: Handover interrupt
|
||
|
|
- description: Stop acknowledge interrupt
|
||
|
|
- description: Shutdown acknowledge interrupt
|
||
|
|
|
||
|
|
interrupt-names:
|
||
|
|
items:
|
||
|
|
- const: wdog
|
||
|
|
- const: fatal
|
||
|
|
- const: ready
|
||
|
|
- const: handover
|
||
|
|
- const: stop-ack
|
||
|
|
- const: shutdown-ack
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
items:
|
||
|
|
- description: GCC MSS IFACE clock
|
||
|
|
- description: GCC MSS OFFLINE clock
|
||
|
|
- description: GCC MSS SNOC_AXI clock
|
||
|
|
- description: RPMH PKA clock
|
||
|
|
- description: RPMH XO clock
|
||
|
|
|
||
|
|
clock-names:
|
||
|
|
items:
|
||
|
|
- const: iface
|
||
|
|
- const: offline
|
||
|
|
- const: snoc_axi
|
||
|
|
- const: pka
|
||
|
|
- const: xo
|
||
|
|
|
||
|
|
power-domains:
|
||
|
|
items:
|
||
|
|
- description: CX power domain
|
||
|
|
- description: MSS power domain
|
||
|
|
|
||
|
|
power-domain-names:
|
||
|
|
items:
|
||
|
|
- const: cx
|
||
|
|
- const: mss
|
||
|
|
|
||
|
|
resets:
|
||
|
|
items:
|
||
|
|
- description: AOSS restart
|
||
|
|
- description: PDC reset
|
||
|
|
|
||
|
|
reset-names:
|
||
|
|
items:
|
||
|
|
- const: mss_restart
|
||
|
|
- const: pdc_reset
|
||
|
|
|
||
|
|
memory-region:
|
||
|
|
items:
|
||
|
|
- description: MBA reserved region
|
||
|
|
- description: modem reserved region
|
||
|
|
- description: metadata reserved region
|
||
|
|
|
||
|
|
firmware-name:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
||
|
|
items:
|
||
|
|
- description: Name of MBA firmware
|
||
|
|
- description: Name of modem firmware
|
||
|
|
|
||
|
|
qcom,halt-regs:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||
|
|
description:
|
||
|
|
Halt registers are used to halt transactions of various sub-components
|
||
|
|
within MSS.
|
||
|
|
items:
|
||
|
|
- items:
|
||
|
|
- description: phandle to TCSR_MUTEX registers
|
||
|
|
- description: offset to the Q6 halt register
|
||
|
|
- description: offset to the modem halt register
|
||
|
|
- description: offset to the nc halt register
|
||
|
|
- description: offset to the vq6 halt register
|
||
|
|
|
||
|
|
qcom,ext-regs:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||
|
|
description: EXT registers are used for various power related functionality
|
||
|
|
items:
|
||
|
|
- items:
|
||
|
|
- description: phandle to TCSR_REG registers
|
||
|
|
- description: offset to the force_clk_en register
|
||
|
|
- description: offset to the rscc_disable register
|
||
|
|
- items:
|
||
|
|
- description: phandle to TCSR_MUTEX registers
|
||
|
|
- description: offset to the axim1_clk_off register
|
||
|
|
- description: offset to the crypto_clk_off register
|
||
|
|
|
||
|
|
qcom,qaccept-regs:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||
|
|
description: QACCEPT registers are used to bring up/down Q-channels
|
||
|
|
items:
|
||
|
|
- items:
|
||
|
|
- description: phandle to TCSR_MUTEX registers
|
||
|
|
- description: offset to the mdm qaccept register
|
||
|
|
- description: offset to the cx qaccept register
|
||
|
|
- description: offset to the axi qaccept register
|
||
|
|
|
||
|
|
qcom,qmp:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
||
|
|
description: Reference to the AOSS side-channel message RAM.
|
||
|
|
|
||
|
|
qcom,smem-states:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||
|
|
description: States used by the AP to signal the Hexagon core
|
||
|
|
items:
|
||
|
|
- description: Stop the modem
|
||
|
|
|
||
|
|
qcom,smem-state-names:
|
||
|
|
description: The names of the state bits used for SMP2P output
|
||
|
|
const: stop
|
||
|
|
|
||
|
|
glink-edge:
|
||
|
|
$ref: qcom,glink-edge.yaml#
|
||
|
|
unevaluatedProperties: false
|
||
|
|
description:
|
||
|
|
Qualcomm G-Link subnode which represents communication edge, channels
|
||
|
|
and devices related to the DSP.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
interrupts:
|
||
|
|
items:
|
||
|
|
- description: IRQ from MSS to GLINK
|
||
|
|
|
||
|
|
mboxes:
|
||
|
|
items:
|
||
|
|
- description: Mailbox for communication between APPS and MSS
|
||
|
|
|
||
|
|
label:
|
||
|
|
const: modem
|
||
|
|
|
||
|
|
apr: false
|
||
|
|
fastrpc: false
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- reg-names
|
||
|
|
- iommus
|
||
|
|
- interconnects
|
||
|
|
- interrupts
|
||
|
|
- interrupt-names
|
||
|
|
- clocks
|
||
|
|
- clock-names
|
||
|
|
- power-domains
|
||
|
|
- power-domain-names
|
||
|
|
- resets
|
||
|
|
- reset-names
|
||
|
|
- qcom,halt-regs
|
||
|
|
- qcom,ext-regs
|
||
|
|
- qcom,qaccept-regs
|
||
|
|
- memory-region
|
||
|
|
- qcom,qmp
|
||
|
|
- qcom,smem-states
|
||
|
|
- qcom,smem-state-names
|
||
|
|
- glink-edge
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
|
||
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
||
|
|
#include <dt-bindings/interconnect/qcom,sc7280.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
#include <dt-bindings/mailbox/qcom-ipcc.h>
|
||
|
|
#include <dt-bindings/power/qcom-rpmpd.h>
|
||
|
|
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
|
||
|
|
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
|
||
|
|
|
||
|
|
remoteproc_mpss: remoteproc@4080000 {
|
||
|
|
compatible = "qcom,sc7280-mss-pil";
|
||
|
|
reg = <0x04080000 0x10000>, <0x04180000 0x48>;
|
||
|
|
reg-names = "qdsp6", "rmb";
|
||
|
|
|
||
|
|
iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
|
||
|
|
|
||
|
|
interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
|
||
|
|
|
||
|
|
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
|
||
|
|
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
||
|
|
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
||
|
|
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
||
|
|
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
|
||
|
|
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
|
||
|
|
interrupt-names = "wdog", "fatal", "ready", "handover",
|
||
|
|
"stop-ack", "shutdown-ack";
|
||
|
|
|
||
|
|
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
|
||
|
|
<&gcc GCC_MSS_OFFLINE_AXI_CLK>,
|
||
|
|
<&gcc GCC_MSS_SNOC_AXI_CLK>,
|
||
|
|
<&rpmhcc RPMH_PKA_CLK>,
|
||
|
|
<&rpmhcc RPMH_CXO_CLK>;
|
||
|
|
clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
|
||
|
|
|
||
|
|
power-domains = <&rpmhpd SC7280_CX>,
|
||
|
|
<&rpmhpd SC7280_MSS>;
|
||
|
|
power-domain-names = "cx", "mss";
|
||
|
|
|
||
|
|
memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
|
||
|
|
|
||
|
|
qcom,qmp = <&aoss_qmp>;
|
||
|
|
|
||
|
|
qcom,smem-states = <&modem_smp2p_out 0>;
|
||
|
|
qcom,smem-state-names = "stop";
|
||
|
|
|
||
|
|
resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
|
||
|
|
<&pdc_reset PDC_MODEM_SYNC_RESET>;
|
||
|
|
reset-names = "mss_restart", "pdc_reset";
|
||
|
|
|
||
|
|
qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
|
||
|
|
qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>;
|
||
|
|
qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
|
||
|
|
|
||
|
|
glink-edge {
|
||
|
|
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
|
||
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
||
|
|
IRQ_TYPE_EDGE_RISING>;
|
||
|
|
mboxes = <&ipcc IPCC_CLIENT_MPSS
|
||
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
||
|
|
label = "modem";
|
||
|
|
qcom,remote-pid = <1>;
|
||
|
|
};
|
||
|
|
};
|