55 lines
1.3 KiB
YAML
55 lines
1.3 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/sound/awinic,aw8738.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Awinic AW8738 Audio Amplifier
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Stephan Gerhold <stephan@gerhold.net>
|
||
|
|
|
||
|
|
description:
|
||
|
|
The Awinic AW8738 is a simple audio amplifier with different operation modes
|
||
|
|
(set using one-wire pulse control). The mode configures the speaker-guard
|
||
|
|
function (primarily the power limit for the amplifier).
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: dai-common.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: awinic,aw8738
|
||
|
|
|
||
|
|
mode-gpios:
|
||
|
|
description:
|
||
|
|
GPIO used for one-wire pulse control. The pin is typically called SHDN
|
||
|
|
(active-low), but this is misleading since it is actually more than
|
||
|
|
just a simple shutdown/enable control.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
awinic,mode:
|
||
|
|
description: Operation mode (number of pulses for one-wire pulse control)
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
minimum: 1
|
||
|
|
maximum: 7
|
||
|
|
|
||
|
|
sound-name-prefix: true
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- mode-gpios
|
||
|
|
- awinic,mode
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
audio-amplifier {
|
||
|
|
compatible = "awinic,aw8738";
|
||
|
|
mode-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
|
||
|
|
awinic,mode = <5>;
|
||
|
|
sound-name-prefix = "Speaker Amp";
|
||
|
|
};
|