120 lines
4.1 KiB
YAML
120 lines
4.1 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/sound/wlf,arizona.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- patches@opensource.cirrus.com
|
||
|
|
|
||
|
|
description: |
|
||
|
|
These devices are audio SoCs with extensive digital capabilities and a range
|
||
|
|
of analogue I/O.
|
||
|
|
|
||
|
|
This document lists sound specific bindings, see the primary binding
|
||
|
|
document ../mfd/arizona.yaml
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: dai-common.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
'#sound-dai-cells':
|
||
|
|
description:
|
||
|
|
The first cell indicating the audio interface.
|
||
|
|
const: 1
|
||
|
|
|
||
|
|
wlf,inmode:
|
||
|
|
description:
|
||
|
|
A list of INn_MODE register values, where n is the number of input
|
||
|
|
signals. Valid values are 0 (Differential), 1 (Single-ended) and
|
||
|
|
2 (Digital Microphone). If absent, INn_MODE registers set to 0 by
|
||
|
|
default. If present, values must be specified less than or equal
|
||
|
|
to the number of input signals. If values less than the number of
|
||
|
|
input signals, elements that have not been specified are set to 0 by
|
||
|
|
default. Entries are <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280,
|
||
|
|
wm8997) and <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 4
|
||
|
|
items:
|
||
|
|
minimum: 0
|
||
|
|
maximum: 2
|
||
|
|
default: 0
|
||
|
|
|
||
|
|
wlf,out-mono:
|
||
|
|
description:
|
||
|
|
A list of boolean values indicating whether each output is mono
|
||
|
|
or stereo. Position within the list indicates the output affected
|
||
|
|
(eg. First entry in the list corresponds to output 1). A non-zero
|
||
|
|
value indicates a mono output. If present, the number of values
|
||
|
|
should be less than or equal to the number of outputs, if less values
|
||
|
|
are supplied the additional outputs will be treated as stereo.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 6
|
||
|
|
items:
|
||
|
|
minimum: 0
|
||
|
|
maximum: 1
|
||
|
|
default: 0
|
||
|
|
|
||
|
|
wlf,dmic-ref:
|
||
|
|
description:
|
||
|
|
DMIC reference voltage source for each input, can be selected from
|
||
|
|
either MICVDD or one of the MICBIAS's, defines (ARIZONA_DMIC_xxxx)
|
||
|
|
are provided in dt-bindings/mfd/arizona.h. If present, the number
|
||
|
|
of values should be less than or equal to the number of inputs,
|
||
|
|
unspecified inputs will use the chip default.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 4
|
||
|
|
items:
|
||
|
|
minimum: 0
|
||
|
|
maximum: 3
|
||
|
|
default: 0
|
||
|
|
|
||
|
|
wlf,max-channels-clocked:
|
||
|
|
description:
|
||
|
|
The maximum number of channels to be clocked on each AIF, useful for
|
||
|
|
I2S systems with multiple data lines being mastered. Specify one
|
||
|
|
cell for each AIF to be configured, specify zero for AIFs that should
|
||
|
|
be handled normally. If present, number of cells must be less than
|
||
|
|
or equal to the number of AIFs. If less than the number of AIFs, for
|
||
|
|
cells that have not been specified the corresponding AIFs will be
|
||
|
|
treated as default setting.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 3
|
||
|
|
items:
|
||
|
|
default: 0
|
||
|
|
|
||
|
|
wlf,spk-fmt:
|
||
|
|
description:
|
||
|
|
PDM speaker data format, must contain 2 cells (OUT5 and OUT6). See
|
||
|
|
the datasheet for values. The second cell is ignored for codecs that
|
||
|
|
do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 2
|
||
|
|
maxItems: 2
|
||
|
|
|
||
|
|
wlf,spk-mute:
|
||
|
|
description:
|
||
|
|
PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). See
|
||
|
|
the datasheet for values. The second cell is ignored for codecs that
|
||
|
|
do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 2
|
||
|
|
maxItems: 2
|
||
|
|
|
||
|
|
wlf,out-volume-limit:
|
||
|
|
description:
|
||
|
|
The volume limit value that should be applied to each output
|
||
|
|
channel. See the datasheet for exact values. Channels are specified
|
||
|
|
in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 12
|
||
|
|
|
||
|
|
additionalProperties: true
|