59 lines
1.8 KiB
Plaintext
59 lines
1.8 KiB
Plaintext
|
* Nuvoton FLASH Interface Unit (FIU) SPI Controller
|
||
|
|
|
||
|
|
NPCM FIU supports single, dual and quad communication interface.
|
||
|
|
|
||
|
|
The NPCM7XX supports three FIU modules,
|
||
|
|
FIU0 and FIUx supports two chip selects,
|
||
|
|
FIU3 support four chip select.
|
||
|
|
|
||
|
|
The NPCM8XX supports four FIU modules,
|
||
|
|
FIU0 and FIUx supports two chip selects,
|
||
|
|
FIU1 and FIU3 supports four chip selects.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC
|
||
|
|
"nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC
|
||
|
|
- #address-cells : should be 1.
|
||
|
|
- #size-cells : should be 0.
|
||
|
|
- reg : the first contains the register location and length,
|
||
|
|
the second contains the memory mapping address and length
|
||
|
|
- reg-names: Should contain the reg names "control" and "memory"
|
||
|
|
- clocks : phandle of FIU reference clock.
|
||
|
|
|
||
|
|
Required properties in case the pins can be muxed:
|
||
|
|
- pinctrl-names : a pinctrl state named "default" must be defined.
|
||
|
|
- pinctrl-0 : phandle referencing pin configuration of the device.
|
||
|
|
|
||
|
|
Optional property:
|
||
|
|
- nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD.
|
||
|
|
|
||
|
|
Aliases:
|
||
|
|
- All the FIU controller nodes should be represented in the aliases node using
|
||
|
|
the following format 'fiu{n}' where n is a unique number for the alias.
|
||
|
|
In the NPCM7XX BMC:
|
||
|
|
fiu0 represent fiu 0 controller
|
||
|
|
fiu1 represent fiu 3 controller
|
||
|
|
fiu2 represent fiu x controller
|
||
|
|
|
||
|
|
In the NPCM8XX BMC:
|
||
|
|
fiu0 represent fiu 0 controller
|
||
|
|
fiu1 represent fiu 1 controller
|
||
|
|
fiu2 represent fiu 3 controller
|
||
|
|
fiu3 represent fiu x controller
|
||
|
|
|
||
|
|
Example:
|
||
|
|
fiu3: spi@c00000000 {
|
||
|
|
compatible = "nuvoton,npcm750-fiu";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>;
|
||
|
|
reg-names = "control", "memory";
|
||
|
|
clocks = <&clk NPCM7XX_CLK_AHB>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&spi3_pins>;
|
||
|
|
flash@0 {
|
||
|
|
...
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|