linux-zen-desktop/arch/riscv/kernel/sys_riscv.c

338 lines
8.3 KiB
C
Raw Normal View History

2023-08-30 17:31:07 +02:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2014 Darius Rad <darius@bluespec.com>
* Copyright (C) 2017 SiFive
*/
#include <linux/syscalls.h>
#include <asm/cacheflush.h>
2023-10-24 12:59:35 +02:00
#include <asm/cpufeature.h>
#include <asm/hwprobe.h>
#include <asm/sbi.h>
#include <asm/vector.h>
#include <asm/switch_to.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
2023-08-30 17:31:07 +02:00
#include <asm-generic/mman-common.h>
2023-10-24 12:59:35 +02:00
#include <vdso/vsyscall.h>
2023-08-30 17:31:07 +02:00
static long riscv_sys_mmap(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, off_t offset,
unsigned long page_shift_offset)
{
if (unlikely(offset & (~PAGE_MASK >> page_shift_offset)))
return -EINVAL;
return ksys_mmap_pgoff(addr, len, prot, flags, fd,
offset >> (PAGE_SHIFT - page_shift_offset));
}
#ifdef CONFIG_64BIT
SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
unsigned long, fd, off_t, offset)
{
return riscv_sys_mmap(addr, len, prot, flags, fd, offset, 0);
}
#endif
#if defined(CONFIG_32BIT) || defined(CONFIG_COMPAT)
SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
unsigned long, fd, off_t, offset)
{
/*
* Note that the shift for mmap2 is constant (12),
* regardless of PAGE_SIZE
*/
return riscv_sys_mmap(addr, len, prot, flags, fd, offset, 12);
}
#endif
/*
* Allows the instruction cache to be flushed from userspace. Despite RISC-V
* having a direct 'fence.i' instruction available to userspace (which we
* can't trap!), that's not actually viable when running on Linux because the
* kernel might schedule a process on another hart. There is no way for
* userspace to handle this without invoking the kernel (as it doesn't know the
* thread->hart mappings), so we've defined a RISC-V specific system call to
* flush the instruction cache.
*
* sys_riscv_flush_icache() is defined to flush the instruction cache over an
* address range, with the flush applying to either all threads or just the
* caller. We don't currently do anything with the address range, that's just
* in there for forwards compatibility.
*/
SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end,
uintptr_t, flags)
{
/* Check the reserved flags. */
if (unlikely(flags & ~SYS_RISCV_FLUSH_ICACHE_ALL))
return -EINVAL;
flush_icache_mm(current->mm, flags & SYS_RISCV_FLUSH_ICACHE_LOCAL);
return 0;
}
2023-10-24 12:59:35 +02:00
/*
* The hwprobe interface, for allowing userspace to probe to see which features
* are supported by the hardware. See Documentation/riscv/hwprobe.rst for more
* details.
*/
static void hwprobe_arch_id(struct riscv_hwprobe *pair,
const struct cpumask *cpus)
{
u64 id = -1ULL;
bool first = true;
int cpu;
for_each_cpu(cpu, cpus) {
u64 cpu_id;
switch (pair->key) {
case RISCV_HWPROBE_KEY_MVENDORID:
cpu_id = riscv_cached_mvendorid(cpu);
break;
case RISCV_HWPROBE_KEY_MIMPID:
cpu_id = riscv_cached_mimpid(cpu);
break;
case RISCV_HWPROBE_KEY_MARCHID:
cpu_id = riscv_cached_marchid(cpu);
break;
}
if (first) {
id = cpu_id;
first = false;
}
/*
* If there's a mismatch for the given set, return -1 in the
* value.
*/
if (id != cpu_id) {
id = -1ULL;
break;
}
}
pair->value = id;
}
static void hwprobe_isa_ext0(struct riscv_hwprobe *pair,
const struct cpumask *cpus)
{
int cpu;
u64 missing = 0;
pair->value = 0;
if (has_fpu())
pair->value |= RISCV_HWPROBE_IMA_FD;
if (riscv_isa_extension_available(NULL, c))
pair->value |= RISCV_HWPROBE_IMA_C;
if (has_vector())
pair->value |= RISCV_HWPROBE_IMA_V;
/*
* Loop through and record extensions that 1) anyone has, and 2) anyone
* doesn't have.
*/
for_each_cpu(cpu, cpus) {
struct riscv_isainfo *isainfo = &hart_isa[cpu];
if (riscv_isa_extension_available(isainfo->isa, ZBA))
pair->value |= RISCV_HWPROBE_EXT_ZBA;
else
missing |= RISCV_HWPROBE_EXT_ZBA;
if (riscv_isa_extension_available(isainfo->isa, ZBB))
pair->value |= RISCV_HWPROBE_EXT_ZBB;
else
missing |= RISCV_HWPROBE_EXT_ZBB;
if (riscv_isa_extension_available(isainfo->isa, ZBS))
pair->value |= RISCV_HWPROBE_EXT_ZBS;
else
missing |= RISCV_HWPROBE_EXT_ZBS;
}
/* Now turn off reporting features if any CPU is missing it. */
pair->value &= ~missing;
}
static u64 hwprobe_misaligned(const struct cpumask *cpus)
{
int cpu;
u64 perf = -1ULL;
for_each_cpu(cpu, cpus) {
int this_perf = per_cpu(misaligned_access_speed, cpu);
if (perf == -1ULL)
perf = this_perf;
if (perf != this_perf) {
perf = RISCV_HWPROBE_MISALIGNED_UNKNOWN;
break;
}
}
if (perf == -1ULL)
return RISCV_HWPROBE_MISALIGNED_UNKNOWN;
return perf;
}
static void hwprobe_one_pair(struct riscv_hwprobe *pair,
const struct cpumask *cpus)
{
switch (pair->key) {
case RISCV_HWPROBE_KEY_MVENDORID:
case RISCV_HWPROBE_KEY_MARCHID:
case RISCV_HWPROBE_KEY_MIMPID:
hwprobe_arch_id(pair, cpus);
break;
/*
* The kernel already assumes that the base single-letter ISA
* extensions are supported on all harts, and only supports the
* IMA base, so just cheat a bit here and tell that to
* userspace.
*/
case RISCV_HWPROBE_KEY_BASE_BEHAVIOR:
pair->value = RISCV_HWPROBE_BASE_BEHAVIOR_IMA;
break;
case RISCV_HWPROBE_KEY_IMA_EXT_0:
hwprobe_isa_ext0(pair, cpus);
break;
case RISCV_HWPROBE_KEY_CPUPERF_0:
pair->value = hwprobe_misaligned(cpus);
break;
/*
* For forward compatibility, unknown keys don't fail the whole
* call, but get their element key set to -1 and value set to 0
* indicating they're unrecognized.
*/
default:
pair->key = -1;
pair->value = 0;
break;
}
}
static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs,
size_t pair_count, size_t cpu_count,
unsigned long __user *cpus_user,
unsigned int flags)
{
size_t out;
int ret;
cpumask_t cpus;
/* Check the reserved flags. */
if (flags != 0)
return -EINVAL;
/*
* The interface supports taking in a CPU mask, and returns values that
* are consistent across that mask. Allow userspace to specify NULL and
* 0 as a shortcut to all online CPUs.
*/
cpumask_clear(&cpus);
if (!cpu_count && !cpus_user) {
cpumask_copy(&cpus, cpu_online_mask);
} else {
if (cpu_count > cpumask_size())
cpu_count = cpumask_size();
ret = copy_from_user(&cpus, cpus_user, cpu_count);
if (ret)
return -EFAULT;
/*
* Userspace must provide at least one online CPU, without that
* there's no way to define what is supported.
*/
cpumask_and(&cpus, &cpus, cpu_online_mask);
if (cpumask_empty(&cpus))
return -EINVAL;
}
for (out = 0; out < pair_count; out++, pairs++) {
struct riscv_hwprobe pair;
if (get_user(pair.key, &pairs->key))
return -EFAULT;
pair.value = 0;
hwprobe_one_pair(&pair, &cpus);
ret = put_user(pair.key, &pairs->key);
if (ret == 0)
ret = put_user(pair.value, &pairs->value);
if (ret)
return -EFAULT;
}
return 0;
}
#ifdef CONFIG_MMU
static int __init init_hwprobe_vdso_data(void)
{
struct vdso_data *vd = __arch_get_k_vdso_data();
struct arch_vdso_data *avd = &vd->arch_data;
u64 id_bitsmash = 0;
struct riscv_hwprobe pair;
int key;
/*
* Initialize vDSO data with the answers for the "all CPUs" case, to
* save a syscall in the common case.
*/
for (key = 0; key <= RISCV_HWPROBE_MAX_KEY; key++) {
pair.key = key;
hwprobe_one_pair(&pair, cpu_online_mask);
WARN_ON_ONCE(pair.key < 0);
avd->all_cpu_hwprobe_values[key] = pair.value;
/*
* Smash together the vendor, arch, and impl IDs to see if
* they're all 0 or any negative.
*/
if (key <= RISCV_HWPROBE_KEY_MIMPID)
id_bitsmash |= pair.value;
}
/*
* If the arch, vendor, and implementation ID are all the same across
* all harts, then assume all CPUs are the same, and allow the vDSO to
* answer queries for arbitrary masks. However if all values are 0 (not
* populated) or any value returns -1 (varies across CPUs), then the
* vDSO should defer to the kernel for exotic cpu masks.
*/
avd->homogeneous_cpus = id_bitsmash != 0 && id_bitsmash != -1;
return 0;
}
arch_initcall_sync(init_hwprobe_vdso_data);
#endif /* CONFIG_MMU */
SYSCALL_DEFINE5(riscv_hwprobe, struct riscv_hwprobe __user *, pairs,
size_t, pair_count, size_t, cpu_count, unsigned long __user *,
cpus, unsigned int, flags)
{
return do_riscv_hwprobe(pairs, pair_count, cpu_count,
cpus, flags);
}