2023-08-30 17:31:07 +02:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
/*
|
|
|
|
* rfd77402.c - Support for RF Digital RFD77402 Time-of-Flight (distance) sensor
|
|
|
|
*
|
|
|
|
* Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
|
|
|
|
*
|
|
|
|
* 7-bit I2C slave address 0x4c
|
|
|
|
*
|
|
|
|
* TODO: interrupt
|
|
|
|
* https://media.digikey.com/pdf/Data%20Sheets/RF%20Digital%20PDFs/RFD77402.pdf
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
#include <linux/iio/iio.h>
|
|
|
|
|
|
|
|
#define RFD77402_DRV_NAME "rfd77402"
|
|
|
|
|
|
|
|
#define RFD77402_ICSR 0x00 /* Interrupt Control Status Register */
|
|
|
|
#define RFD77402_ICSR_INT_MODE BIT(2)
|
|
|
|
#define RFD77402_ICSR_INT_POL BIT(3)
|
|
|
|
#define RFD77402_ICSR_RESULT BIT(4)
|
|
|
|
#define RFD77402_ICSR_M2H_MSG BIT(5)
|
|
|
|
#define RFD77402_ICSR_H2M_MSG BIT(6)
|
|
|
|
#define RFD77402_ICSR_RESET BIT(7)
|
|
|
|
|
|
|
|
#define RFD77402_CMD_R 0x04
|
|
|
|
#define RFD77402_CMD_SINGLE 0x01
|
|
|
|
#define RFD77402_CMD_STANDBY 0x10
|
|
|
|
#define RFD77402_CMD_MCPU_OFF 0x11
|
|
|
|
#define RFD77402_CMD_MCPU_ON 0x12
|
|
|
|
#define RFD77402_CMD_RESET BIT(6)
|
|
|
|
#define RFD77402_CMD_VALID BIT(7)
|
|
|
|
|
|
|
|
#define RFD77402_STATUS_R 0x06
|
|
|
|
#define RFD77402_STATUS_PM_MASK GENMASK(4, 0)
|
|
|
|
#define RFD77402_STATUS_STANDBY 0x00
|
|
|
|
#define RFD77402_STATUS_MCPU_OFF 0x10
|
|
|
|
#define RFD77402_STATUS_MCPU_ON 0x18
|
|
|
|
|
|
|
|
#define RFD77402_RESULT_R 0x08
|
|
|
|
#define RFD77402_RESULT_DIST_MASK GENMASK(12, 2)
|
|
|
|
#define RFD77402_RESULT_ERR_MASK GENMASK(14, 13)
|
|
|
|
#define RFD77402_RESULT_VALID BIT(15)
|
|
|
|
|
|
|
|
#define RFD77402_PMU_CFG 0x14
|
|
|
|
#define RFD77402_PMU_MCPU_INIT BIT(9)
|
|
|
|
|
|
|
|
#define RFD77402_I2C_INIT_CFG 0x1c
|
|
|
|
#define RFD77402_I2C_ADDR_INCR BIT(0)
|
|
|
|
#define RFD77402_I2C_DATA_INCR BIT(2)
|
|
|
|
#define RFD77402_I2C_HOST_DEBUG BIT(5)
|
|
|
|
#define RFD77402_I2C_MCPU_DEBUG BIT(6)
|
|
|
|
|
|
|
|
#define RFD77402_CMD_CFGR_A 0x0c
|
|
|
|
#define RFD77402_CMD_CFGR_B 0x0e
|
|
|
|
#define RFD77402_HFCFG_0 0x20
|
|
|
|
#define RFD77402_HFCFG_1 0x22
|
|
|
|
#define RFD77402_HFCFG_2 0x24
|
|
|
|
#define RFD77402_HFCFG_3 0x26
|
|
|
|
|
|
|
|
#define RFD77402_MOD_CHIP_ID 0x28
|
|
|
|
|
|
|
|
/* magic configuration values from datasheet */
|
|
|
|
static const struct {
|
|
|
|
u8 reg;
|
|
|
|
u16 val;
|
|
|
|
} rf77402_tof_config[] = {
|
|
|
|
{RFD77402_CMD_CFGR_A, 0xe100},
|
|
|
|
{RFD77402_CMD_CFGR_B, 0x10ff},
|
|
|
|
{RFD77402_HFCFG_0, 0x07d0},
|
|
|
|
{RFD77402_HFCFG_1, 0x5008},
|
|
|
|
{RFD77402_HFCFG_2, 0xa041},
|
|
|
|
{RFD77402_HFCFG_3, 0x45d4},
|
|
|
|
};
|
|
|
|
|
|
|
|
struct rfd77402_data {
|
|
|
|
struct i2c_client *client;
|
|
|
|
/* Serialize reads from the sensor */
|
|
|
|
struct mutex lock;
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct iio_chan_spec rfd77402_channels[] = {
|
|
|
|
{
|
|
|
|
.type = IIO_DISTANCE,
|
|
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int rfd77402_set_state(struct i2c_client *client, u8 state, u16 check)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
|
|
|
|
state | RFD77402_CMD_VALID);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
usleep_range(10000, 20000);
|
|
|
|
|
|
|
|
ret = i2c_smbus_read_word_data(client, RFD77402_STATUS_R);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
if ((ret & RFD77402_STATUS_PM_MASK) != check)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rfd77402_measure(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
int tries = 10;
|
|
|
|
|
|
|
|
ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
|
|
|
|
RFD77402_STATUS_MCPU_ON);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
|
|
|
|
RFD77402_CMD_SINGLE |
|
|
|
|
RFD77402_CMD_VALID);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
while (tries-- > 0) {
|
|
|
|
ret = i2c_smbus_read_byte_data(client, RFD77402_ICSR);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
if (ret & RFD77402_ICSR_RESULT)
|
|
|
|
break;
|
|
|
|
msleep(20);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tries < 0) {
|
|
|
|
ret = -ETIMEDOUT;
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = i2c_smbus_read_word_data(client, RFD77402_RESULT_R);
|
|
|
|
if (ret < 0)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
if ((ret & RFD77402_RESULT_ERR_MASK) ||
|
|
|
|
!(ret & RFD77402_RESULT_VALID)) {
|
|
|
|
ret = -EIO;
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
return (ret & RFD77402_RESULT_DIST_MASK) >> 2;
|
|
|
|
|
|
|
|
err:
|
|
|
|
rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
|
|
|
|
RFD77402_STATUS_MCPU_OFF);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rfd77402_read_raw(struct iio_dev *indio_dev,
|
|
|
|
struct iio_chan_spec const *chan,
|
|
|
|
int *val, int *val2, long mask)
|
|
|
|
{
|
|
|
|
struct rfd77402_data *data = iio_priv(indio_dev);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
switch (mask) {
|
|
|
|
case IIO_CHAN_INFO_RAW:
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
ret = rfd77402_measure(data->client);
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
*val = ret;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
|
|
/* 1 LSB is 1 mm */
|
|
|
|
*val = 0;
|
|
|
|
*val2 = 1000;
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct iio_info rfd77402_info = {
|
|
|
|
.read_raw = rfd77402_read_raw,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int rfd77402_init(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
int ret, i;
|
|
|
|
|
|
|
|
ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
|
|
|
|
RFD77402_STATUS_STANDBY);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* configure INT pad as push-pull, active low */
|
|
|
|
ret = i2c_smbus_write_byte_data(client, RFD77402_ICSR,
|
|
|
|
RFD77402_ICSR_INT_MODE);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* I2C configuration */
|
|
|
|
ret = i2c_smbus_write_word_data(client, RFD77402_I2C_INIT_CFG,
|
|
|
|
RFD77402_I2C_ADDR_INCR |
|
|
|
|
RFD77402_I2C_DATA_INCR |
|
|
|
|
RFD77402_I2C_HOST_DEBUG |
|
|
|
|
RFD77402_I2C_MCPU_DEBUG);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* set initialization */
|
|
|
|
ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0500);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
|
|
|
|
RFD77402_STATUS_MCPU_OFF);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* set initialization */
|
|
|
|
ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0600);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
|
|
|
|
RFD77402_STATUS_MCPU_ON);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rf77402_tof_config); i++) {
|
|
|
|
ret = i2c_smbus_write_word_data(client,
|
|
|
|
rf77402_tof_config[i].reg,
|
|
|
|
rf77402_tof_config[i].val);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
|
|
|
|
RFD77402_STATUS_STANDBY);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rfd77402_powerdown(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
return rfd77402_set_state(client, RFD77402_CMD_STANDBY,
|
|
|
|
RFD77402_STATUS_STANDBY);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rfd77402_disable(void *client)
|
|
|
|
{
|
|
|
|
rfd77402_powerdown(client);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rfd77402_probe(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
struct rfd77402_data *data;
|
|
|
|
struct iio_dev *indio_dev;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = i2c_smbus_read_word_data(client, RFD77402_MOD_CHIP_ID);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
if (ret != 0xad01 && ret != 0xad02) /* known chip ids */
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
|
|
if (!indio_dev)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
data = iio_priv(indio_dev);
|
|
|
|
data->client = client;
|
|
|
|
mutex_init(&data->lock);
|
|
|
|
|
|
|
|
indio_dev->info = &rfd77402_info;
|
|
|
|
indio_dev->channels = rfd77402_channels;
|
|
|
|
indio_dev->num_channels = ARRAY_SIZE(rfd77402_channels);
|
|
|
|
indio_dev->name = RFD77402_DRV_NAME;
|
|
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
|
|
|
|
ret = rfd77402_init(client);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = devm_add_action_or_reset(&client->dev, rfd77402_disable, client);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rfd77402_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
return rfd77402_powerdown(to_i2c_client(dev));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rfd77402_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
return rfd77402_init(to_i2c_client(dev));
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(rfd77402_pm_ops, rfd77402_suspend,
|
|
|
|
rfd77402_resume);
|
|
|
|
|
|
|
|
static const struct i2c_device_id rfd77402_id[] = {
|
|
|
|
{ "rfd77402", 0 },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, rfd77402_id);
|
|
|
|
|
|
|
|
static struct i2c_driver rfd77402_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = RFD77402_DRV_NAME,
|
|
|
|
.pm = pm_sleep_ptr(&rfd77402_pm_ops),
|
|
|
|
},
|
2023-10-24 12:59:35 +02:00
|
|
|
.probe = rfd77402_probe,
|
2023-08-30 17:31:07 +02:00
|
|
|
.id_table = rfd77402_id,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_i2c_driver(rfd77402_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>");
|
|
|
|
MODULE_DESCRIPTION("RFD77402 Time-of-Flight sensor driver");
|
|
|
|
MODULE_LICENSE("GPL");
|