1057 lines
24 KiB
C
1057 lines
24 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* CAN driver for PEAK System PCAN-USB adapter
|
||
|
* Derived from the PCAN project file driver/src/pcan_usb.c
|
||
|
*
|
||
|
* Copyright (C) 2003-2010 PEAK System-Technik GmbH
|
||
|
* Copyright (C) 2011-2012 Stephane Grosjean <s.grosjean@peak-system.com>
|
||
|
*
|
||
|
* Many thanks to Klaus Hitschler <klaus.hitschler@gmx.de>
|
||
|
*/
|
||
|
#include <asm/unaligned.h>
|
||
|
|
||
|
#include <linux/ethtool.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/netdevice.h>
|
||
|
#include <linux/usb.h>
|
||
|
|
||
|
#include <linux/can.h>
|
||
|
#include <linux/can/dev.h>
|
||
|
#include <linux/can/error.h>
|
||
|
|
||
|
#include "pcan_usb_core.h"
|
||
|
|
||
|
/* PCAN-USB Endpoints */
|
||
|
#define PCAN_USB_EP_CMDOUT 1
|
||
|
#define PCAN_USB_EP_CMDIN (PCAN_USB_EP_CMDOUT | USB_DIR_IN)
|
||
|
#define PCAN_USB_EP_MSGOUT 2
|
||
|
#define PCAN_USB_EP_MSGIN (PCAN_USB_EP_MSGOUT | USB_DIR_IN)
|
||
|
|
||
|
/* PCAN-USB command struct */
|
||
|
#define PCAN_USB_CMD_FUNC 0
|
||
|
#define PCAN_USB_CMD_NUM 1
|
||
|
#define PCAN_USB_CMD_ARGS 2
|
||
|
#define PCAN_USB_CMD_ARGS_LEN 14
|
||
|
#define PCAN_USB_CMD_LEN (PCAN_USB_CMD_ARGS + \
|
||
|
PCAN_USB_CMD_ARGS_LEN)
|
||
|
|
||
|
/* PCAN-USB commands */
|
||
|
#define PCAN_USB_CMD_BITRATE 1
|
||
|
#define PCAN_USB_CMD_SET_BUS 3
|
||
|
#define PCAN_USB_CMD_DEVID 4
|
||
|
#define PCAN_USB_CMD_SN 6
|
||
|
#define PCAN_USB_CMD_REGISTER 9
|
||
|
#define PCAN_USB_CMD_EXT_VCC 10
|
||
|
#define PCAN_USB_CMD_ERR_FR 11
|
||
|
#define PCAN_USB_CMD_LED 12
|
||
|
|
||
|
/* PCAN_USB_CMD_SET_BUS number arg */
|
||
|
#define PCAN_USB_BUS_XCVER 2
|
||
|
#define PCAN_USB_BUS_SILENT_MODE 3
|
||
|
|
||
|
/* PCAN_USB_CMD_xxx functions */
|
||
|
#define PCAN_USB_GET 1
|
||
|
#define PCAN_USB_SET 2
|
||
|
|
||
|
/* PCAN-USB command timeout (ms.) */
|
||
|
#define PCAN_USB_COMMAND_TIMEOUT 1000
|
||
|
|
||
|
/* PCAN-USB startup timeout (ms.) */
|
||
|
#define PCAN_USB_STARTUP_TIMEOUT 10
|
||
|
|
||
|
/* PCAN-USB rx/tx buffers size */
|
||
|
#define PCAN_USB_RX_BUFFER_SIZE 64
|
||
|
#define PCAN_USB_TX_BUFFER_SIZE 64
|
||
|
|
||
|
#define PCAN_USB_MSG_HEADER_LEN 2
|
||
|
|
||
|
#define PCAN_USB_MSG_TX_CAN 2 /* Tx msg is a CAN frame */
|
||
|
|
||
|
/* PCAN-USB adapter internal clock (MHz) */
|
||
|
#define PCAN_USB_CRYSTAL_HZ 16000000
|
||
|
|
||
|
/* PCAN-USB USB message record status/len field */
|
||
|
#define PCAN_USB_STATUSLEN_TIMESTAMP (1 << 7)
|
||
|
#define PCAN_USB_STATUSLEN_INTERNAL (1 << 6)
|
||
|
#define PCAN_USB_STATUSLEN_EXT_ID (1 << 5)
|
||
|
#define PCAN_USB_STATUSLEN_RTR (1 << 4)
|
||
|
#define PCAN_USB_STATUSLEN_DLC (0xf)
|
||
|
|
||
|
/* PCAN-USB 4.1 CAN Id tx extended flags */
|
||
|
#define PCAN_USB_TX_SRR 0x01 /* SJA1000 SRR command */
|
||
|
#define PCAN_USB_TX_AT 0x02 /* SJA1000 AT command */
|
||
|
|
||
|
/* PCAN-USB error flags */
|
||
|
#define PCAN_USB_ERROR_TXFULL 0x01
|
||
|
#define PCAN_USB_ERROR_RXQOVR 0x02
|
||
|
#define PCAN_USB_ERROR_BUS_LIGHT 0x04
|
||
|
#define PCAN_USB_ERROR_BUS_HEAVY 0x08
|
||
|
#define PCAN_USB_ERROR_BUS_OFF 0x10
|
||
|
#define PCAN_USB_ERROR_RXQEMPTY 0x20
|
||
|
#define PCAN_USB_ERROR_QOVR 0x40
|
||
|
#define PCAN_USB_ERROR_TXQFULL 0x80
|
||
|
|
||
|
#define PCAN_USB_ERROR_BUS (PCAN_USB_ERROR_BUS_LIGHT | \
|
||
|
PCAN_USB_ERROR_BUS_HEAVY | \
|
||
|
PCAN_USB_ERROR_BUS_OFF)
|
||
|
|
||
|
/* SJA1000 modes */
|
||
|
#define SJA1000_MODE_NORMAL 0x00
|
||
|
#define SJA1000_MODE_INIT 0x01
|
||
|
|
||
|
/*
|
||
|
* tick duration = 42.666 us =>
|
||
|
* (tick_number * 44739243) >> 20 ~ (tick_number * 42666) / 1000
|
||
|
* accuracy = 10^-7
|
||
|
*/
|
||
|
#define PCAN_USB_TS_DIV_SHIFTER 20
|
||
|
#define PCAN_USB_TS_US_PER_TICK 44739243
|
||
|
|
||
|
/* PCAN-USB messages record types */
|
||
|
#define PCAN_USB_REC_ERROR 1
|
||
|
#define PCAN_USB_REC_ANALOG 2
|
||
|
#define PCAN_USB_REC_BUSLOAD 3
|
||
|
#define PCAN_USB_REC_TS 4
|
||
|
#define PCAN_USB_REC_BUSEVT 5
|
||
|
|
||
|
/* CAN bus events notifications selection mask */
|
||
|
#define PCAN_USB_ERR_RXERR 0x02 /* ask for rxerr counter */
|
||
|
#define PCAN_USB_ERR_TXERR 0x04 /* ask for txerr counter */
|
||
|
|
||
|
/* This mask generates an usb packet each time the state of the bus changes.
|
||
|
* In other words, its interest is to know which side among rx and tx is
|
||
|
* responsible of the change of the bus state.
|
||
|
*/
|
||
|
#define PCAN_USB_BERR_MASK (PCAN_USB_ERR_RXERR | PCAN_USB_ERR_TXERR)
|
||
|
|
||
|
/* identify bus event packets with rx/tx error counters */
|
||
|
#define PCAN_USB_ERR_CNT_DEC 0x00 /* counters are decreasing */
|
||
|
#define PCAN_USB_ERR_CNT_INC 0x80 /* counters are increasing */
|
||
|
|
||
|
/* private to PCAN-USB adapter */
|
||
|
struct pcan_usb {
|
||
|
struct peak_usb_device dev;
|
||
|
struct peak_time_ref time_ref;
|
||
|
struct timer_list restart_timer;
|
||
|
struct can_berr_counter bec;
|
||
|
};
|
||
|
|
||
|
/* incoming message context for decoding */
|
||
|
struct pcan_usb_msg_context {
|
||
|
u16 ts16;
|
||
|
u8 prev_ts8;
|
||
|
u8 *ptr;
|
||
|
u8 *end;
|
||
|
u8 rec_cnt;
|
||
|
u8 rec_idx;
|
||
|
u8 rec_ts_idx;
|
||
|
struct net_device *netdev;
|
||
|
struct pcan_usb *pdev;
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* send a command
|
||
|
*/
|
||
|
static int pcan_usb_send_cmd(struct peak_usb_device *dev, u8 f, u8 n, u8 *p)
|
||
|
{
|
||
|
int err;
|
||
|
int actual_length;
|
||
|
|
||
|
/* usb device unregistered? */
|
||
|
if (!(dev->state & PCAN_USB_STATE_CONNECTED))
|
||
|
return 0;
|
||
|
|
||
|
dev->cmd_buf[PCAN_USB_CMD_FUNC] = f;
|
||
|
dev->cmd_buf[PCAN_USB_CMD_NUM] = n;
|
||
|
|
||
|
if (p)
|
||
|
memcpy(dev->cmd_buf + PCAN_USB_CMD_ARGS,
|
||
|
p, PCAN_USB_CMD_ARGS_LEN);
|
||
|
|
||
|
err = usb_bulk_msg(dev->udev,
|
||
|
usb_sndbulkpipe(dev->udev, PCAN_USB_EP_CMDOUT),
|
||
|
dev->cmd_buf, PCAN_USB_CMD_LEN, &actual_length,
|
||
|
PCAN_USB_COMMAND_TIMEOUT);
|
||
|
if (err)
|
||
|
netdev_err(dev->netdev,
|
||
|
"sending cmd f=0x%x n=0x%x failure: %d\n",
|
||
|
f, n, err);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* send a command then wait for its response
|
||
|
*/
|
||
|
static int pcan_usb_wait_rsp(struct peak_usb_device *dev, u8 f, u8 n, u8 *p)
|
||
|
{
|
||
|
int err;
|
||
|
int actual_length;
|
||
|
|
||
|
/* usb device unregistered? */
|
||
|
if (!(dev->state & PCAN_USB_STATE_CONNECTED))
|
||
|
return 0;
|
||
|
|
||
|
/* first, send command */
|
||
|
err = pcan_usb_send_cmd(dev, f, n, NULL);
|
||
|
if (err)
|
||
|
return err;
|
||
|
|
||
|
err = usb_bulk_msg(dev->udev,
|
||
|
usb_rcvbulkpipe(dev->udev, PCAN_USB_EP_CMDIN),
|
||
|
dev->cmd_buf, PCAN_USB_CMD_LEN, &actual_length,
|
||
|
PCAN_USB_COMMAND_TIMEOUT);
|
||
|
if (err)
|
||
|
netdev_err(dev->netdev,
|
||
|
"waiting rsp f=0x%x n=0x%x failure: %d\n", f, n, err);
|
||
|
else if (p)
|
||
|
memcpy(p, dev->cmd_buf + PCAN_USB_CMD_ARGS,
|
||
|
PCAN_USB_CMD_ARGS_LEN);
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int pcan_usb_set_sja1000(struct peak_usb_device *dev, u8 mode)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN] = {
|
||
|
[1] = mode,
|
||
|
};
|
||
|
|
||
|
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_REGISTER, PCAN_USB_SET,
|
||
|
args);
|
||
|
}
|
||
|
|
||
|
static int pcan_usb_set_bus(struct peak_usb_device *dev, u8 onoff)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN] = {
|
||
|
[0] = !!onoff,
|
||
|
};
|
||
|
|
||
|
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_SET_BUS, PCAN_USB_BUS_XCVER,
|
||
|
args);
|
||
|
}
|
||
|
|
||
|
static int pcan_usb_set_silent(struct peak_usb_device *dev, u8 onoff)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN] = {
|
||
|
[0] = !!onoff,
|
||
|
};
|
||
|
|
||
|
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_SET_BUS,
|
||
|
PCAN_USB_BUS_SILENT_MODE, args);
|
||
|
}
|
||
|
|
||
|
/* send the cmd to be notified from bus errors */
|
||
|
static int pcan_usb_set_err_frame(struct peak_usb_device *dev, u8 err_mask)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN] = {
|
||
|
[0] = err_mask,
|
||
|
};
|
||
|
|
||
|
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_ERR_FR, PCAN_USB_SET, args);
|
||
|
}
|
||
|
|
||
|
static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN] = {
|
||
|
[0] = !!onoff,
|
||
|
};
|
||
|
|
||
|
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_EXT_VCC, PCAN_USB_SET, args);
|
||
|
}
|
||
|
|
||
|
static int pcan_usb_set_led(struct peak_usb_device *dev, u8 onoff)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN] = {
|
||
|
[0] = !!onoff,
|
||
|
};
|
||
|
|
||
|
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_LED, PCAN_USB_SET, args);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* set bittiming value to can
|
||
|
*/
|
||
|
static int pcan_usb_set_bittiming(struct peak_usb_device *dev,
|
||
|
struct can_bittiming *bt)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN];
|
||
|
u8 btr0, btr1;
|
||
|
|
||
|
btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
|
||
|
btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
|
||
|
(((bt->phase_seg2 - 1) & 0x7) << 4);
|
||
|
if (dev->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
|
||
|
btr1 |= 0x80;
|
||
|
|
||
|
netdev_info(dev->netdev, "setting BTR0=0x%02x BTR1=0x%02x\n",
|
||
|
btr0, btr1);
|
||
|
|
||
|
args[0] = btr1;
|
||
|
args[1] = btr0;
|
||
|
|
||
|
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_BITRATE, PCAN_USB_SET, args);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* init/reset can
|
||
|
*/
|
||
|
static int pcan_usb_write_mode(struct peak_usb_device *dev, u8 onoff)
|
||
|
{
|
||
|
int err;
|
||
|
|
||
|
err = pcan_usb_set_bus(dev, onoff);
|
||
|
if (err)
|
||
|
return err;
|
||
|
|
||
|
if (!onoff) {
|
||
|
err = pcan_usb_set_sja1000(dev, SJA1000_MODE_INIT);
|
||
|
} else {
|
||
|
/* the PCAN-USB needs time to init */
|
||
|
set_current_state(TASK_INTERRUPTIBLE);
|
||
|
schedule_timeout(msecs_to_jiffies(PCAN_USB_STARTUP_TIMEOUT));
|
||
|
}
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* handle end of waiting for the device to reset
|
||
|
*/
|
||
|
static void pcan_usb_restart(struct timer_list *t)
|
||
|
{
|
||
|
struct pcan_usb *pdev = from_timer(pdev, t, restart_timer);
|
||
|
struct peak_usb_device *dev = &pdev->dev;
|
||
|
|
||
|
/* notify candev and netdev */
|
||
|
peak_usb_restart_complete(dev);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* handle the submission of the restart urb
|
||
|
*/
|
||
|
static void pcan_usb_restart_pending(struct urb *urb)
|
||
|
{
|
||
|
struct pcan_usb *pdev = urb->context;
|
||
|
|
||
|
/* the PCAN-USB needs time to restart */
|
||
|
mod_timer(&pdev->restart_timer,
|
||
|
jiffies + msecs_to_jiffies(PCAN_USB_STARTUP_TIMEOUT));
|
||
|
|
||
|
/* can delete usb resources */
|
||
|
peak_usb_async_complete(urb);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* handle asynchronous restart
|
||
|
*/
|
||
|
static int pcan_usb_restart_async(struct peak_usb_device *dev, struct urb *urb,
|
||
|
u8 *buf)
|
||
|
{
|
||
|
struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev);
|
||
|
|
||
|
if (timer_pending(&pdev->restart_timer))
|
||
|
return -EBUSY;
|
||
|
|
||
|
/* set bus on */
|
||
|
buf[PCAN_USB_CMD_FUNC] = 3;
|
||
|
buf[PCAN_USB_CMD_NUM] = 2;
|
||
|
buf[PCAN_USB_CMD_ARGS] = 1;
|
||
|
|
||
|
usb_fill_bulk_urb(urb, dev->udev,
|
||
|
usb_sndbulkpipe(dev->udev, PCAN_USB_EP_CMDOUT),
|
||
|
buf, PCAN_USB_CMD_LEN,
|
||
|
pcan_usb_restart_pending, pdev);
|
||
|
|
||
|
return usb_submit_urb(urb, GFP_ATOMIC);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* read serial number from device
|
||
|
*/
|
||
|
static int pcan_usb_get_serial(struct peak_usb_device *dev, u32 *serial_number)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN];
|
||
|
int err;
|
||
|
|
||
|
err = pcan_usb_wait_rsp(dev, PCAN_USB_CMD_SN, PCAN_USB_GET, args);
|
||
|
if (err)
|
||
|
return err;
|
||
|
*serial_number = le32_to_cpup((__le32 *)args);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* read can channel id from device
|
||
|
*/
|
||
|
static int pcan_usb_get_can_channel_id(struct peak_usb_device *dev, u32 *can_ch_id)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN];
|
||
|
int err;
|
||
|
|
||
|
err = pcan_usb_wait_rsp(dev, PCAN_USB_CMD_DEVID, PCAN_USB_GET, args);
|
||
|
if (err)
|
||
|
netdev_err(dev->netdev, "getting can channel id failure: %d\n", err);
|
||
|
|
||
|
else
|
||
|
*can_ch_id = args[0];
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/* set a new CAN channel id in the flash memory of the device */
|
||
|
static int pcan_usb_set_can_channel_id(struct peak_usb_device *dev, u32 can_ch_id)
|
||
|
{
|
||
|
u8 args[PCAN_USB_CMD_ARGS_LEN];
|
||
|
|
||
|
/* this kind of device supports 8-bit values only */
|
||
|
if (can_ch_id > U8_MAX)
|
||
|
return -EINVAL;
|
||
|
|
||
|
/* during the flash process the device disconnects during ~1.25 s.:
|
||
|
* prohibit access when interface is UP
|
||
|
*/
|
||
|
if (dev->netdev->flags & IFF_UP)
|
||
|
return -EBUSY;
|
||
|
|
||
|
args[0] = can_ch_id;
|
||
|
return pcan_usb_send_cmd(dev, PCAN_USB_CMD_DEVID, PCAN_USB_SET, args);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* update current time ref with received timestamp
|
||
|
*/
|
||
|
static int pcan_usb_update_ts(struct pcan_usb_msg_context *mc)
|
||
|
{
|
||
|
if ((mc->ptr + 2) > mc->end)
|
||
|
return -EINVAL;
|
||
|
|
||
|
mc->ts16 = get_unaligned_le16(mc->ptr);
|
||
|
|
||
|
if (mc->rec_idx > 0)
|
||
|
peak_usb_update_ts_now(&mc->pdev->time_ref, mc->ts16);
|
||
|
else
|
||
|
peak_usb_set_ts_now(&mc->pdev->time_ref, mc->ts16);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* decode received timestamp
|
||
|
*/
|
||
|
static int pcan_usb_decode_ts(struct pcan_usb_msg_context *mc, u8 first_packet)
|
||
|
{
|
||
|
/* only 1st packet supplies a word timestamp */
|
||
|
if (first_packet) {
|
||
|
if ((mc->ptr + 2) > mc->end)
|
||
|
return -EINVAL;
|
||
|
|
||
|
mc->ts16 = get_unaligned_le16(mc->ptr);
|
||
|
mc->prev_ts8 = mc->ts16 & 0x00ff;
|
||
|
|
||
|
mc->ptr += 2;
|
||
|
} else {
|
||
|
u8 ts8;
|
||
|
|
||
|
if ((mc->ptr + 1) > mc->end)
|
||
|
return -EINVAL;
|
||
|
|
||
|
ts8 = *mc->ptr++;
|
||
|
|
||
|
if (ts8 < mc->prev_ts8)
|
||
|
mc->ts16 += 0x100;
|
||
|
|
||
|
mc->ts16 &= 0xff00;
|
||
|
mc->ts16 |= ts8;
|
||
|
mc->prev_ts8 = ts8;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n,
|
||
|
u8 status_len)
|
||
|
{
|
||
|
struct sk_buff *skb;
|
||
|
struct can_frame *cf;
|
||
|
enum can_state new_state = CAN_STATE_ERROR_ACTIVE;
|
||
|
|
||
|
/* ignore this error until 1st ts received */
|
||
|
if (n == PCAN_USB_ERROR_QOVR)
|
||
|
if (!mc->pdev->time_ref.tick_count)
|
||
|
return 0;
|
||
|
|
||
|
/* allocate an skb to store the error frame */
|
||
|
skb = alloc_can_err_skb(mc->netdev, &cf);
|
||
|
|
||
|
if (n & PCAN_USB_ERROR_RXQOVR) {
|
||
|
/* data overrun interrupt */
|
||
|
netdev_dbg(mc->netdev, "data overrun interrupt\n");
|
||
|
mc->netdev->stats.rx_over_errors++;
|
||
|
mc->netdev->stats.rx_errors++;
|
||
|
if (cf) {
|
||
|
cf->can_id |= CAN_ERR_CRTL;
|
||
|
cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (n & PCAN_USB_ERROR_TXQFULL)
|
||
|
netdev_dbg(mc->netdev, "device Tx queue full)\n");
|
||
|
|
||
|
if (n & PCAN_USB_ERROR_BUS_OFF) {
|
||
|
new_state = CAN_STATE_BUS_OFF;
|
||
|
} else if (n & PCAN_USB_ERROR_BUS_HEAVY) {
|
||
|
new_state = ((mc->pdev->bec.txerr >= 128) ||
|
||
|
(mc->pdev->bec.rxerr >= 128)) ?
|
||
|
CAN_STATE_ERROR_PASSIVE :
|
||
|
CAN_STATE_ERROR_WARNING;
|
||
|
} else {
|
||
|
new_state = CAN_STATE_ERROR_ACTIVE;
|
||
|
}
|
||
|
|
||
|
/* handle change of state */
|
||
|
if (new_state != mc->pdev->dev.can.state) {
|
||
|
enum can_state tx_state =
|
||
|
(mc->pdev->bec.txerr >= mc->pdev->bec.rxerr) ?
|
||
|
new_state : 0;
|
||
|
enum can_state rx_state =
|
||
|
(mc->pdev->bec.txerr <= mc->pdev->bec.rxerr) ?
|
||
|
new_state : 0;
|
||
|
|
||
|
can_change_state(mc->netdev, cf, tx_state, rx_state);
|
||
|
|
||
|
if (new_state == CAN_STATE_BUS_OFF) {
|
||
|
can_bus_off(mc->netdev);
|
||
|
} else if (cf && (cf->can_id & CAN_ERR_CRTL)) {
|
||
|
/* Supply TX/RX error counters in case of
|
||
|
* controller error.
|
||
|
*/
|
||
|
cf->can_id = CAN_ERR_CNT;
|
||
|
cf->data[6] = mc->pdev->bec.txerr;
|
||
|
cf->data[7] = mc->pdev->bec.rxerr;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (!skb)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) {
|
||
|
struct skb_shared_hwtstamps *hwts = skb_hwtstamps(skb);
|
||
|
|
||
|
peak_usb_get_ts_time(&mc->pdev->time_ref, mc->ts16,
|
||
|
&hwts->hwtstamp);
|
||
|
}
|
||
|
|
||
|
netif_rx(skb);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* decode bus event usb packet: first byte contains rxerr while 2nd one contains
|
||
|
* txerr.
|
||
|
*/
|
||
|
static int pcan_usb_handle_bus_evt(struct pcan_usb_msg_context *mc, u8 ir)
|
||
|
{
|
||
|
struct pcan_usb *pdev = mc->pdev;
|
||
|
|
||
|
/* according to the content of the packet */
|
||
|
switch (ir) {
|
||
|
case PCAN_USB_ERR_CNT_DEC:
|
||
|
case PCAN_USB_ERR_CNT_INC:
|
||
|
|
||
|
/* save rx/tx error counters from in the device context */
|
||
|
pdev->bec.rxerr = mc->ptr[1];
|
||
|
pdev->bec.txerr = mc->ptr[2];
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
/* reserved */
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* decode non-data usb message
|
||
|
*/
|
||
|
static int pcan_usb_decode_status(struct pcan_usb_msg_context *mc,
|
||
|
u8 status_len)
|
||
|
{
|
||
|
u8 rec_len = status_len & PCAN_USB_STATUSLEN_DLC;
|
||
|
u8 f, n;
|
||
|
int err;
|
||
|
|
||
|
/* check whether function and number can be read */
|
||
|
if ((mc->ptr + 2) > mc->end)
|
||
|
return -EINVAL;
|
||
|
|
||
|
f = mc->ptr[PCAN_USB_CMD_FUNC];
|
||
|
n = mc->ptr[PCAN_USB_CMD_NUM];
|
||
|
mc->ptr += PCAN_USB_CMD_ARGS;
|
||
|
|
||
|
if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) {
|
||
|
int err = pcan_usb_decode_ts(mc, !mc->rec_ts_idx);
|
||
|
|
||
|
if (err)
|
||
|
return err;
|
||
|
|
||
|
/* Next packet in the buffer will have a timestamp on a single
|
||
|
* byte
|
||
|
*/
|
||
|
mc->rec_ts_idx++;
|
||
|
}
|
||
|
|
||
|
switch (f) {
|
||
|
case PCAN_USB_REC_ERROR:
|
||
|
err = pcan_usb_decode_error(mc, n, status_len);
|
||
|
if (err)
|
||
|
return err;
|
||
|
break;
|
||
|
|
||
|
case PCAN_USB_REC_ANALOG:
|
||
|
/* analog values (ignored) */
|
||
|
rec_len = 2;
|
||
|
break;
|
||
|
|
||
|
case PCAN_USB_REC_BUSLOAD:
|
||
|
/* bus load (ignored) */
|
||
|
rec_len = 1;
|
||
|
break;
|
||
|
|
||
|
case PCAN_USB_REC_TS:
|
||
|
/* only timestamp */
|
||
|
if (pcan_usb_update_ts(mc))
|
||
|
return -EINVAL;
|
||
|
break;
|
||
|
|
||
|
case PCAN_USB_REC_BUSEVT:
|
||
|
/* bus event notifications (get rxerr/txerr) */
|
||
|
err = pcan_usb_handle_bus_evt(mc, n);
|
||
|
if (err)
|
||
|
return err;
|
||
|
break;
|
||
|
default:
|
||
|
netdev_err(mc->netdev, "unexpected function %u\n", f);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if ((mc->ptr + rec_len) > mc->end)
|
||
|
return -EINVAL;
|
||
|
|
||
|
mc->ptr += rec_len;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* decode data usb message
|
||
|
*/
|
||
|
static int pcan_usb_decode_data(struct pcan_usb_msg_context *mc, u8 status_len)
|
||
|
{
|
||
|
u8 rec_len = status_len & PCAN_USB_STATUSLEN_DLC;
|
||
|
struct sk_buff *skb;
|
||
|
struct can_frame *cf;
|
||
|
struct skb_shared_hwtstamps *hwts;
|
||
|
u32 can_id_flags;
|
||
|
|
||
|
skb = alloc_can_skb(mc->netdev, &cf);
|
||
|
if (!skb)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
if (status_len & PCAN_USB_STATUSLEN_EXT_ID) {
|
||
|
if ((mc->ptr + 4) > mc->end)
|
||
|
goto decode_failed;
|
||
|
|
||
|
can_id_flags = get_unaligned_le32(mc->ptr);
|
||
|
cf->can_id = can_id_flags >> 3 | CAN_EFF_FLAG;
|
||
|
mc->ptr += 4;
|
||
|
} else {
|
||
|
if ((mc->ptr + 2) > mc->end)
|
||
|
goto decode_failed;
|
||
|
|
||
|
can_id_flags = get_unaligned_le16(mc->ptr);
|
||
|
cf->can_id = can_id_flags >> 5;
|
||
|
mc->ptr += 2;
|
||
|
}
|
||
|
|
||
|
can_frame_set_cc_len(cf, rec_len, mc->pdev->dev.can.ctrlmode);
|
||
|
|
||
|
/* Only first packet timestamp is a word */
|
||
|
if (pcan_usb_decode_ts(mc, !mc->rec_ts_idx))
|
||
|
goto decode_failed;
|
||
|
|
||
|
/* Next packet in the buffer will have a timestamp on a single byte */
|
||
|
mc->rec_ts_idx++;
|
||
|
|
||
|
/* read data */
|
||
|
memset(cf->data, 0x0, sizeof(cf->data));
|
||
|
if (status_len & PCAN_USB_STATUSLEN_RTR) {
|
||
|
cf->can_id |= CAN_RTR_FLAG;
|
||
|
} else {
|
||
|
if ((mc->ptr + rec_len) > mc->end)
|
||
|
goto decode_failed;
|
||
|
|
||
|
memcpy(cf->data, mc->ptr, cf->len);
|
||
|
mc->ptr += rec_len;
|
||
|
|
||
|
/* Ignore next byte (client private id) if SRR bit is set */
|
||
|
if (can_id_flags & PCAN_USB_TX_SRR)
|
||
|
mc->ptr++;
|
||
|
|
||
|
/* update statistics */
|
||
|
mc->netdev->stats.rx_bytes += cf->len;
|
||
|
}
|
||
|
mc->netdev->stats.rx_packets++;
|
||
|
|
||
|
/* convert timestamp into kernel time */
|
||
|
hwts = skb_hwtstamps(skb);
|
||
|
peak_usb_get_ts_time(&mc->pdev->time_ref, mc->ts16, &hwts->hwtstamp);
|
||
|
|
||
|
/* push the skb */
|
||
|
netif_rx(skb);
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
decode_failed:
|
||
|
dev_kfree_skb(skb);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* process incoming message
|
||
|
*/
|
||
|
static int pcan_usb_decode_msg(struct peak_usb_device *dev, u8 *ibuf, u32 lbuf)
|
||
|
{
|
||
|
struct pcan_usb_msg_context mc = {
|
||
|
.rec_cnt = ibuf[1],
|
||
|
.ptr = ibuf + PCAN_USB_MSG_HEADER_LEN,
|
||
|
.end = ibuf + lbuf,
|
||
|
.netdev = dev->netdev,
|
||
|
.pdev = container_of(dev, struct pcan_usb, dev),
|
||
|
};
|
||
|
int err;
|
||
|
|
||
|
for (err = 0; mc.rec_idx < mc.rec_cnt && !err; mc.rec_idx++) {
|
||
|
u8 sl = *mc.ptr++;
|
||
|
|
||
|
/* handle status and error frames here */
|
||
|
if (sl & PCAN_USB_STATUSLEN_INTERNAL) {
|
||
|
err = pcan_usb_decode_status(&mc, sl);
|
||
|
/* handle normal can frames here */
|
||
|
} else {
|
||
|
err = pcan_usb_decode_data(&mc, sl);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* process any incoming buffer
|
||
|
*/
|
||
|
static int pcan_usb_decode_buf(struct peak_usb_device *dev, struct urb *urb)
|
||
|
{
|
||
|
int err = 0;
|
||
|
|
||
|
if (urb->actual_length > PCAN_USB_MSG_HEADER_LEN) {
|
||
|
err = pcan_usb_decode_msg(dev, urb->transfer_buffer,
|
||
|
urb->actual_length);
|
||
|
|
||
|
} else if (urb->actual_length > 0) {
|
||
|
netdev_err(dev->netdev, "usb message length error (%u)\n",
|
||
|
urb->actual_length);
|
||
|
err = -EINVAL;
|
||
|
}
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* process outgoing packet
|
||
|
*/
|
||
|
static int pcan_usb_encode_msg(struct peak_usb_device *dev, struct sk_buff *skb,
|
||
|
u8 *obuf, size_t *size)
|
||
|
{
|
||
|
struct net_device *netdev = dev->netdev;
|
||
|
struct net_device_stats *stats = &netdev->stats;
|
||
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
||
|
u32 can_id_flags = cf->can_id & CAN_ERR_MASK;
|
||
|
u8 *pc;
|
||
|
|
||
|
obuf[0] = PCAN_USB_MSG_TX_CAN;
|
||
|
obuf[1] = 1; /* only one CAN frame is stored in the packet */
|
||
|
|
||
|
pc = obuf + PCAN_USB_MSG_HEADER_LEN;
|
||
|
|
||
|
/* status/len byte */
|
||
|
*pc = can_get_cc_dlc(cf, dev->can.ctrlmode);
|
||
|
|
||
|
if (cf->can_id & CAN_RTR_FLAG)
|
||
|
*pc |= PCAN_USB_STATUSLEN_RTR;
|
||
|
|
||
|
/* can id */
|
||
|
if (cf->can_id & CAN_EFF_FLAG) {
|
||
|
*pc |= PCAN_USB_STATUSLEN_EXT_ID;
|
||
|
pc++;
|
||
|
|
||
|
can_id_flags <<= 3;
|
||
|
|
||
|
if (dev->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
|
||
|
can_id_flags |= PCAN_USB_TX_SRR;
|
||
|
|
||
|
if (dev->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
|
||
|
can_id_flags |= PCAN_USB_TX_AT;
|
||
|
|
||
|
put_unaligned_le32(can_id_flags, pc);
|
||
|
pc += 4;
|
||
|
} else {
|
||
|
pc++;
|
||
|
|
||
|
can_id_flags <<= 5;
|
||
|
|
||
|
if (dev->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
|
||
|
can_id_flags |= PCAN_USB_TX_SRR;
|
||
|
|
||
|
if (dev->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
|
||
|
can_id_flags |= PCAN_USB_TX_AT;
|
||
|
|
||
|
put_unaligned_le16(can_id_flags, pc);
|
||
|
pc += 2;
|
||
|
}
|
||
|
|
||
|
/* can data */
|
||
|
if (!(cf->can_id & CAN_RTR_FLAG)) {
|
||
|
memcpy(pc, cf->data, cf->len);
|
||
|
pc += cf->len;
|
||
|
}
|
||
|
|
||
|
/* SRR bit needs a writer id (useless here) */
|
||
|
if (can_id_flags & PCAN_USB_TX_SRR)
|
||
|
*pc++ = 0x80;
|
||
|
|
||
|
obuf[(*size)-1] = (u8)(stats->tx_packets & 0xff);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* socket callback used to copy berr counters values received through USB */
|
||
|
static int pcan_usb_get_berr_counter(const struct net_device *netdev,
|
||
|
struct can_berr_counter *bec)
|
||
|
{
|
||
|
struct peak_usb_device *dev = netdev_priv(netdev);
|
||
|
struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev);
|
||
|
|
||
|
*bec = pdev->bec;
|
||
|
|
||
|
/* must return 0 */
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* start interface
|
||
|
*/
|
||
|
static int pcan_usb_start(struct peak_usb_device *dev)
|
||
|
{
|
||
|
struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev);
|
||
|
int err;
|
||
|
|
||
|
/* number of bits used in timestamps read from adapter struct */
|
||
|
peak_usb_init_time_ref(&pdev->time_ref, &pcan_usb);
|
||
|
|
||
|
pdev->bec.rxerr = 0;
|
||
|
pdev->bec.txerr = 0;
|
||
|
|
||
|
/* always ask the device for BERR reporting, to be able to switch from
|
||
|
* WARNING to PASSIVE state
|
||
|
*/
|
||
|
err = pcan_usb_set_err_frame(dev, PCAN_USB_BERR_MASK);
|
||
|
if (err)
|
||
|
netdev_warn(dev->netdev,
|
||
|
"Asking for BERR reporting error %u\n",
|
||
|
err);
|
||
|
|
||
|
/* if revision greater than 3, can put silent mode on/off */
|
||
|
if (dev->device_rev > 3) {
|
||
|
err = pcan_usb_set_silent(dev,
|
||
|
dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY);
|
||
|
if (err)
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
return pcan_usb_set_ext_vcc(dev, 0);
|
||
|
}
|
||
|
|
||
|
static int pcan_usb_init(struct peak_usb_device *dev)
|
||
|
{
|
||
|
struct pcan_usb *pdev = container_of(dev, struct pcan_usb, dev);
|
||
|
u32 serial_number;
|
||
|
int err;
|
||
|
|
||
|
/* initialize a timer needed to wait for hardware restart */
|
||
|
timer_setup(&pdev->restart_timer, pcan_usb_restart, 0);
|
||
|
|
||
|
/*
|
||
|
* explicit use of dev_xxx() instead of netdev_xxx() here:
|
||
|
* information displayed are related to the device itself, not
|
||
|
* to the canx netdevice.
|
||
|
*/
|
||
|
err = pcan_usb_get_serial(dev, &serial_number);
|
||
|
if (err) {
|
||
|
dev_err(dev->netdev->dev.parent,
|
||
|
"unable to read %s serial number (err %d)\n",
|
||
|
pcan_usb.name, err);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
dev_info(dev->netdev->dev.parent,
|
||
|
"PEAK-System %s adapter hwrev %u serial %08X (%u channel)\n",
|
||
|
pcan_usb.name, dev->device_rev, serial_number,
|
||
|
pcan_usb.ctrl_count);
|
||
|
|
||
|
/* Since rev 4.1, PCAN-USB is able to make single-shot as well as
|
||
|
* looped back frames.
|
||
|
*/
|
||
|
if (dev->device_rev >= 41) {
|
||
|
struct can_priv *priv = netdev_priv(dev->netdev);
|
||
|
|
||
|
priv->ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT |
|
||
|
CAN_CTRLMODE_LOOPBACK;
|
||
|
} else {
|
||
|
dev_info(dev->netdev->dev.parent,
|
||
|
"Firmware update available. Please contact support@peak-system.com\n");
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* probe function for new PCAN-USB usb interface
|
||
|
*/
|
||
|
static int pcan_usb_probe(struct usb_interface *intf)
|
||
|
{
|
||
|
struct usb_host_interface *if_desc;
|
||
|
int i;
|
||
|
|
||
|
if_desc = intf->altsetting;
|
||
|
|
||
|
/* check interface endpoint addresses */
|
||
|
for (i = 0; i < if_desc->desc.bNumEndpoints; i++) {
|
||
|
struct usb_endpoint_descriptor *ep = &if_desc->endpoint[i].desc;
|
||
|
|
||
|
switch (ep->bEndpointAddress) {
|
||
|
case PCAN_USB_EP_CMDOUT:
|
||
|
case PCAN_USB_EP_CMDIN:
|
||
|
case PCAN_USB_EP_MSGOUT:
|
||
|
case PCAN_USB_EP_MSGIN:
|
||
|
break;
|
||
|
default:
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int pcan_usb_set_phys_id(struct net_device *netdev,
|
||
|
enum ethtool_phys_id_state state)
|
||
|
{
|
||
|
struct peak_usb_device *dev = netdev_priv(netdev);
|
||
|
int err = 0;
|
||
|
|
||
|
switch (state) {
|
||
|
case ETHTOOL_ID_ACTIVE:
|
||
|
/* call ON/OFF twice a second */
|
||
|
return 2;
|
||
|
|
||
|
case ETHTOOL_ID_OFF:
|
||
|
err = pcan_usb_set_led(dev, 0);
|
||
|
break;
|
||
|
|
||
|
case ETHTOOL_ID_ON:
|
||
|
fallthrough;
|
||
|
|
||
|
case ETHTOOL_ID_INACTIVE:
|
||
|
/* restore LED default */
|
||
|
err = pcan_usb_set_led(dev, 1);
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/* This device only handles 8-bit CAN channel id. */
|
||
|
static int pcan_usb_get_eeprom_len(struct net_device *netdev)
|
||
|
{
|
||
|
return sizeof(u8);
|
||
|
}
|
||
|
|
||
|
static const struct ethtool_ops pcan_usb_ethtool_ops = {
|
||
|
.set_phys_id = pcan_usb_set_phys_id,
|
||
|
.get_ts_info = pcan_get_ts_info,
|
||
|
.get_eeprom_len = pcan_usb_get_eeprom_len,
|
||
|
.get_eeprom = peak_usb_get_eeprom,
|
||
|
.set_eeprom = peak_usb_set_eeprom,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* describe the PCAN-USB adapter
|
||
|
*/
|
||
|
static const struct can_bittiming_const pcan_usb_const = {
|
||
|
.name = "pcan_usb",
|
||
|
.tseg1_min = 1,
|
||
|
.tseg1_max = 16,
|
||
|
.tseg2_min = 1,
|
||
|
.tseg2_max = 8,
|
||
|
.sjw_max = 4,
|
||
|
.brp_min = 1,
|
||
|
.brp_max = 64,
|
||
|
.brp_inc = 1,
|
||
|
};
|
||
|
|
||
|
const struct peak_usb_adapter pcan_usb = {
|
||
|
.name = "PCAN-USB",
|
||
|
.device_id = PCAN_USB_PRODUCT_ID,
|
||
|
.ctrl_count = 1,
|
||
|
.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY |
|
||
|
CAN_CTRLMODE_CC_LEN8_DLC,
|
||
|
.clock = {
|
||
|
.freq = PCAN_USB_CRYSTAL_HZ / 2,
|
||
|
},
|
||
|
.bittiming_const = &pcan_usb_const,
|
||
|
|
||
|
/* size of device private data */
|
||
|
.sizeof_dev_private = sizeof(struct pcan_usb),
|
||
|
|
||
|
.ethtool_ops = &pcan_usb_ethtool_ops,
|
||
|
|
||
|
/* timestamps usage */
|
||
|
.ts_used_bits = 16,
|
||
|
.us_per_ts_scale = PCAN_USB_TS_US_PER_TICK, /* us=(ts*scale) */
|
||
|
.us_per_ts_shift = PCAN_USB_TS_DIV_SHIFTER, /* >> shift */
|
||
|
|
||
|
/* give here messages in/out endpoints */
|
||
|
.ep_msg_in = PCAN_USB_EP_MSGIN,
|
||
|
.ep_msg_out = {PCAN_USB_EP_MSGOUT},
|
||
|
|
||
|
/* size of rx/tx usb buffers */
|
||
|
.rx_buffer_size = PCAN_USB_RX_BUFFER_SIZE,
|
||
|
.tx_buffer_size = PCAN_USB_TX_BUFFER_SIZE,
|
||
|
|
||
|
/* device callbacks */
|
||
|
.intf_probe = pcan_usb_probe,
|
||
|
.dev_init = pcan_usb_init,
|
||
|
.dev_set_bus = pcan_usb_write_mode,
|
||
|
.dev_set_bittiming = pcan_usb_set_bittiming,
|
||
|
.dev_get_can_channel_id = pcan_usb_get_can_channel_id,
|
||
|
.dev_set_can_channel_id = pcan_usb_set_can_channel_id,
|
||
|
.dev_decode_buf = pcan_usb_decode_buf,
|
||
|
.dev_encode_msg = pcan_usb_encode_msg,
|
||
|
.dev_start = pcan_usb_start,
|
||
|
.dev_restart_async = pcan_usb_restart_async,
|
||
|
.do_get_berr_counter = pcan_usb_get_berr_counter,
|
||
|
};
|