linux-zen-desktop/drivers/net/wireless/intel/iwlwifi/fw/api/sta.h

495 lines
18 KiB
C
Raw Normal View History

2023-08-30 17:31:07 +02:00
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright (C) 2012-2014, 2018-2021 Intel Corporation
* Copyright (C) 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2016-2017 Intel Deutschland GmbH
*/
#ifndef __iwl_fw_api_sta_h__
#define __iwl_fw_api_sta_h__
/**
* enum iwl_sta_flags - flags for the ADD_STA host command
* @STA_FLG_REDUCED_TX_PWR_CTRL: reduced TX power (control frames)
* @STA_FLG_REDUCED_TX_PWR_DATA: reduced TX power (data frames)
* @STA_FLG_DISABLE_TX: set if TX should be disabled
* @STA_FLG_PS: set if STA is in Power Save
* @STA_FLG_DRAIN_FLOW: drain flow
* @STA_FLG_PAN: STA is for PAN interface
* @STA_FLG_CLASS_AUTH: station is authenticated
* @STA_FLG_CLASS_ASSOC: station is associated
* @STA_FLG_RTS_MIMO_PROT: station requires RTS MIMO protection (dynamic SMPS)
* @STA_FLG_MAX_AGG_SIZE_MSK: maximal size for A-MPDU (mask)
* @STA_FLG_MAX_AGG_SIZE_SHIFT: maximal size for A-MPDU (bit shift)
* @STA_FLG_MAX_AGG_SIZE_8K: maximal size for A-MPDU (8k supported)
* @STA_FLG_MAX_AGG_SIZE_16K: maximal size for A-MPDU (16k supported)
* @STA_FLG_MAX_AGG_SIZE_32K: maximal size for A-MPDU (32k supported)
* @STA_FLG_MAX_AGG_SIZE_64K: maximal size for A-MPDU (64k supported)
* @STA_FLG_MAX_AGG_SIZE_128K: maximal size for A-MPDU (128k supported)
* @STA_FLG_MAX_AGG_SIZE_256K: maximal size for A-MPDU (256k supported)
* @STA_FLG_MAX_AGG_SIZE_512K: maximal size for A-MPDU (512k supported)
* @STA_FLG_MAX_AGG_SIZE_1024K: maximal size for A-MPDU (1024k supported)
* @STA_FLG_MAX_AGG_SIZE_2M: maximal size for A-MPDU (2M supported)
* @STA_FLG_MAX_AGG_SIZE_4M: maximal size for A-MPDU (4M supported)
* @STA_FLG_AGG_MPDU_DENS_MSK: maximal MPDU density for Tx aggregation
* @STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is
* initialised by driver and can be updated by fw upon reception of
* action frames that can change the channel width. When cleared the fw
* will send all the frames in 20MHz even when FAT channel is requested.
* @STA_FLG_FAT_EN_20MHZ: no wide channels are supported, only 20 MHz
* @STA_FLG_FAT_EN_40MHZ: wide channels up to 40 MHz supported
* @STA_FLG_FAT_EN_80MHZ: wide channels up to 80 MHz supported
* @STA_FLG_FAT_EN_160MHZ: wide channels up to 160 MHz supported
* @STA_FLG_MIMO_EN_MSK: support for MIMO. This flag is initialised by the
* driver and can be updated by fw upon reception of action frames.
* @STA_FLG_MIMO_EN_SISO: no support for MIMO
* @STA_FLG_MIMO_EN_MIMO2: 2 streams supported
* @STA_FLG_MIMO_EN_MIMO3: 3 streams supported
* @STA_FLG_AGG_MPDU_DENS_MSK: A-MPDU density (mask)
* @STA_FLG_AGG_MPDU_DENS_SHIFT: A-MPDU density (bit shift)
* @STA_FLG_AGG_MPDU_DENS_2US: A-MPDU density (2 usec gap)
* @STA_FLG_AGG_MPDU_DENS_4US: A-MPDU density (4 usec gap)
* @STA_FLG_AGG_MPDU_DENS_8US: A-MPDU density (8 usec gap)
* @STA_FLG_AGG_MPDU_DENS_16US: A-MPDU density (16 usec gap)
*/
enum iwl_sta_flags {
STA_FLG_REDUCED_TX_PWR_CTRL = BIT(3),
STA_FLG_REDUCED_TX_PWR_DATA = BIT(6),
STA_FLG_DISABLE_TX = BIT(4),
STA_FLG_PS = BIT(8),
STA_FLG_DRAIN_FLOW = BIT(12),
STA_FLG_PAN = BIT(13),
STA_FLG_CLASS_AUTH = BIT(14),
STA_FLG_CLASS_ASSOC = BIT(15),
STA_FLG_RTS_MIMO_PROT = BIT(17),
STA_FLG_MAX_AGG_SIZE_SHIFT = 19,
STA_FLG_MAX_AGG_SIZE_8K = (0 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_16K = (1 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_32K = (2 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_64K = (3 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_128K = (4 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_256K = (5 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_512K = (6 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_1024K = (7 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_2M = (8 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_4M = (9 << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_MAX_AGG_SIZE_MSK = (0xf << STA_FLG_MAX_AGG_SIZE_SHIFT),
STA_FLG_AGG_MPDU_DENS_SHIFT = 23,
STA_FLG_AGG_MPDU_DENS_2US = (4 << STA_FLG_AGG_MPDU_DENS_SHIFT),
STA_FLG_AGG_MPDU_DENS_4US = (5 << STA_FLG_AGG_MPDU_DENS_SHIFT),
STA_FLG_AGG_MPDU_DENS_8US = (6 << STA_FLG_AGG_MPDU_DENS_SHIFT),
STA_FLG_AGG_MPDU_DENS_16US = (7 << STA_FLG_AGG_MPDU_DENS_SHIFT),
STA_FLG_AGG_MPDU_DENS_MSK = (7 << STA_FLG_AGG_MPDU_DENS_SHIFT),
STA_FLG_FAT_EN_20MHZ = (0 << 26),
STA_FLG_FAT_EN_40MHZ = (1 << 26),
STA_FLG_FAT_EN_80MHZ = (2 << 26),
STA_FLG_FAT_EN_160MHZ = (3 << 26),
STA_FLG_FAT_EN_MSK = (3 << 26),
STA_FLG_MIMO_EN_SISO = (0 << 28),
STA_FLG_MIMO_EN_MIMO2 = (1 << 28),
STA_FLG_MIMO_EN_MIMO3 = (2 << 28),
STA_FLG_MIMO_EN_MSK = (3 << 28),
};
/**
* enum iwl_sta_key_flag - key flags for the ADD_STA host command
* @STA_KEY_FLG_NO_ENC: no encryption
* @STA_KEY_FLG_WEP: WEP encryption algorithm
* @STA_KEY_FLG_CCM: CCMP encryption algorithm
* @STA_KEY_FLG_TKIP: TKIP encryption algorithm
* @STA_KEY_FLG_EXT: extended cipher algorithm (depends on the FW support)
* @STA_KEY_FLG_GCMP: GCMP encryption algorithm
* @STA_KEY_FLG_CMAC: CMAC encryption algorithm
* @STA_KEY_FLG_ENC_UNKNOWN: unknown encryption algorithm
* @STA_KEY_FLG_EN_MSK: mask for encryption algorithmi value
* @STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from
* station info array (1 - n 1X mode)
* @STA_KEY_FLG_KEYID_MSK: the index of the key
* @STA_KEY_FLG_KEYID_POS: key index bit position
* @STA_KEY_NOT_VALID: key is invalid
* @STA_KEY_FLG_WEP_13BYTES: set for 13 bytes WEP key
* @STA_KEY_FLG_KEY_32BYTES: for non-wep key set for 32 bytes key
* @STA_KEY_MULTICAST: set for multical key
* @STA_KEY_MFP: key is used for Management Frame Protection
*/
enum iwl_sta_key_flag {
STA_KEY_FLG_NO_ENC = (0 << 0),
STA_KEY_FLG_WEP = (1 << 0),
STA_KEY_FLG_CCM = (2 << 0),
STA_KEY_FLG_TKIP = (3 << 0),
STA_KEY_FLG_EXT = (4 << 0),
STA_KEY_FLG_GCMP = (5 << 0),
STA_KEY_FLG_CMAC = (6 << 0),
STA_KEY_FLG_ENC_UNKNOWN = (7 << 0),
STA_KEY_FLG_EN_MSK = (7 << 0),
STA_KEY_FLG_WEP_KEY_MAP = BIT(3),
STA_KEY_FLG_KEYID_POS = 8,
STA_KEY_FLG_KEYID_MSK = (3 << STA_KEY_FLG_KEYID_POS),
STA_KEY_NOT_VALID = BIT(11),
STA_KEY_FLG_WEP_13BYTES = BIT(12),
STA_KEY_FLG_KEY_32BYTES = BIT(12),
STA_KEY_MULTICAST = BIT(14),
STA_KEY_MFP = BIT(15),
};
/**
* enum iwl_sta_modify_flag - indicate to the fw what flag are being changed
* @STA_MODIFY_QUEUE_REMOVAL: this command removes a queue
* @STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx
* @STA_MODIFY_UAPSD_ACS: this command modifies %uapsd_acs
* @STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid
* @STA_MODIFY_REMOVE_BA_TID: this command modifies %remove_immediate_ba_tid
* @STA_MODIFY_SLEEPING_STA_TX_COUNT: this command modifies %sleep_tx_count
* @STA_MODIFY_PROT_TH: modify RTS threshold
* @STA_MODIFY_QUEUES: modify the queues used by this station
*/
enum iwl_sta_modify_flag {
STA_MODIFY_QUEUE_REMOVAL = BIT(0),
STA_MODIFY_TID_DISABLE_TX = BIT(1),
STA_MODIFY_UAPSD_ACS = BIT(2),
STA_MODIFY_ADD_BA_TID = BIT(3),
STA_MODIFY_REMOVE_BA_TID = BIT(4),
STA_MODIFY_SLEEPING_STA_TX_COUNT = BIT(5),
STA_MODIFY_PROT_TH = BIT(6),
STA_MODIFY_QUEUES = BIT(7),
};
/**
* enum iwl_sta_mode - station command mode
* @STA_MODE_ADD: add new station
* @STA_MODE_MODIFY: modify the station
*/
enum iwl_sta_mode {
STA_MODE_ADD = 0,
STA_MODE_MODIFY = 1,
};
/**
* enum iwl_sta_sleep_flag - type of sleep of the station
* @STA_SLEEP_STATE_AWAKE: station is awake
* @STA_SLEEP_STATE_PS_POLL: station is PS-polling
* @STA_SLEEP_STATE_UAPSD: station uses U-APSD
* @STA_SLEEP_STATE_MOREDATA: set more-data bit on
* (last) released frame
*/
enum iwl_sta_sleep_flag {
STA_SLEEP_STATE_AWAKE = 0,
STA_SLEEP_STATE_PS_POLL = BIT(0),
STA_SLEEP_STATE_UAPSD = BIT(1),
STA_SLEEP_STATE_MOREDATA = BIT(2),
};
#define STA_KEY_MAX_NUM (16)
#define STA_KEY_IDX_INVALID (0xff)
#define STA_KEY_MAX_DATA_KEY_NUM (4)
#define IWL_MAX_GLOBAL_KEYS (4)
#define STA_KEY_LEN_WEP40 (5)
#define STA_KEY_LEN_WEP104 (13)
#define IWL_ADD_STA_STATUS_MASK 0xFF
#define IWL_ADD_STA_BAID_VALID_MASK 0x8000
#define IWL_ADD_STA_BAID_MASK 0x7F00
#define IWL_ADD_STA_BAID_SHIFT 8
/**
* struct iwl_mvm_add_sta_cmd_v7 - Add/modify a station in the fw's sta table.
* ( REPLY_ADD_STA = 0x18 )
* @add_modify: see &enum iwl_sta_mode
* @awake_acs: ACs to transmit data on while station is sleeping (for U-APSD)
* @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
* AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field.
* @mac_id_n_color: the Mac context this station belongs to,
* see &enum iwl_ctxt_id_and_color
* @addr: station's MAC address
* @reserved2: reserved
* @sta_id: index of station in uCode's station table
* @modify_mask: from &enum iwl_sta_modify_flag, selects what to change
* @reserved3: reserved
* @station_flags: look at &enum iwl_sta_flags
* @station_flags_msk: what of %station_flags have changed,
* also &enum iwl_sta_flags
* @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
* Set %STA_MODIFY_ADD_BA_TID to use this field, and also set
* add_immediate_ba_ssn.
* @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx)
* Set %STA_MODIFY_REMOVE_BA_TID to use this field
* @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with
* add_immediate_ba_tid.
* @sleep_tx_count: number of packets to transmit to station even though it is
* asleep. Used to synchronise PS-poll and u-APSD responses while ucode
* keeps track of STA sleep state.
* @sleep_state_flags: Look at &enum iwl_sta_sleep_flag.
* @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
* mac-addr.
* @beamform_flags: beam forming controls
* @tfd_queue_msk: tfd queues used by this station
*
* The device contains an internal table of per-station information, with info
* on security keys, aggregation parameters, and Tx rates for initial Tx
* attempt and any retries (set by REPLY_TX_LINK_QUALITY_CMD).
*
* ADD_STA sets up the table entry for one station, either creating a new
* entry, or modifying a pre-existing one.
*/
struct iwl_mvm_add_sta_cmd_v7 {
u8 add_modify;
u8 awake_acs;
__le16 tid_disable_tx;
__le32 mac_id_n_color;
u8 addr[ETH_ALEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */
__le16 reserved2;
u8 sta_id;
u8 modify_mask;
__le16 reserved3;
__le32 station_flags;
__le32 station_flags_msk;
u8 add_immediate_ba_tid;
u8 remove_immediate_ba_tid;
__le16 add_immediate_ba_ssn;
__le16 sleep_tx_count;
__le16 sleep_state_flags;
__le16 assoc_id;
__le16 beamform_flags;
__le32 tfd_queue_msk;
} __packed; /* ADD_STA_CMD_API_S_VER_7 */
/**
* enum iwl_sta_type - FW station types
* ( REPLY_ADD_STA = 0x18 )
* @IWL_STA_LINK: Link station - normal RX and TX traffic.
* @IWL_STA_GENERAL_PURPOSE: General purpose. In AP mode used for beacons
* and probe responses.
* @IWL_STA_MULTICAST: multicast traffic,
* @IWL_STA_TDLS_LINK: TDLS link station
* @IWL_STA_AUX_ACTIVITY: auxilary station (scan, ROC and so on).
*/
enum iwl_sta_type {
IWL_STA_LINK,
IWL_STA_GENERAL_PURPOSE,
IWL_STA_MULTICAST,
IWL_STA_TDLS_LINK,
IWL_STA_AUX_ACTIVITY,
};
/**
* struct iwl_mvm_add_sta_cmd - Add/modify a station in the fw's sta table.
* ( REPLY_ADD_STA = 0x18 )
* @add_modify: see &enum iwl_sta_mode
* @awake_acs: ACs to transmit data on while station is sleeping (for U-APSD)
* @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
* AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field.
* @mac_id_n_color: the Mac context this station belongs to,
* see &enum iwl_ctxt_id_and_color
* @addr: station's MAC address
* @reserved2: reserved
* @sta_id: index of station in uCode's station table
* @modify_mask: from &enum iwl_sta_modify_flag, selects what to change
* @reserved3: reserved
* @station_flags: look at &enum iwl_sta_flags
* @station_flags_msk: what of %station_flags have changed,
* also &enum iwl_sta_flags
* @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
* Set %STA_MODIFY_ADD_BA_TID to use this field, and also set
* add_immediate_ba_ssn.
* @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx)
* Set %STA_MODIFY_REMOVE_BA_TID to use this field
* @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with
* add_immediate_ba_tid.
* @sleep_tx_count: number of packets to transmit to station even though it is
* asleep. Used to synchronise PS-poll and u-APSD responses while ucode
* keeps track of STA sleep state.
* @station_type: type of this station. See &enum iwl_sta_type.
* @sleep_state_flags: Look at &enum iwl_sta_sleep_flag.
* @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
* mac-addr.
* @beamform_flags: beam forming controls
* @tfd_queue_msk: tfd queues used by this station.
* Obselete for new TX API (9 and above).
* @rx_ba_window: aggregation window size
* @sp_length: the size of the SP in actual number of frames
* @uapsd_acs: 4 LS bits are trigger enabled ACs, 4 MS bits are the deliver
* enabled ACs.
*
* The device contains an internal table of per-station information, with info
* on security keys, aggregation parameters, and Tx rates for initial Tx
* attempt and any retries (set by REPLY_TX_LINK_QUALITY_CMD).
*
* ADD_STA sets up the table entry for one station, either creating a new
* entry, or modifying a pre-existing one.
*/
struct iwl_mvm_add_sta_cmd {
u8 add_modify;
u8 awake_acs;
__le16 tid_disable_tx;
__le32 mac_id_n_color; /* can be used for lmac id when using cmd v12 */
u8 addr[ETH_ALEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */
__le16 reserved2;
u8 sta_id;
u8 modify_mask;
__le16 reserved3;
__le32 station_flags;
__le32 station_flags_msk;
u8 add_immediate_ba_tid;
u8 remove_immediate_ba_tid;
__le16 add_immediate_ba_ssn;
__le16 sleep_tx_count;
u8 sleep_state_flags;
u8 station_type;
__le16 assoc_id;
__le16 beamform_flags;
__le32 tfd_queue_msk;
__le16 rx_ba_window;
u8 sp_length;
u8 uapsd_acs;
} __packed; /* ADD_STA_CMD_API_S_VER_10 */
/**
* struct iwl_mvm_add_sta_key_common - add/modify sta key common part
* ( REPLY_ADD_STA_KEY = 0x17 )
* @sta_id: index of station in uCode's station table
* @key_offset: key offset in key storage
* @key_flags: type &enum iwl_sta_key_flag
* @key: key material data
* @rx_secur_seq_cnt: RX security sequence counter for the key
*/
struct iwl_mvm_add_sta_key_common {
u8 sta_id;
u8 key_offset;
__le16 key_flags;
u8 key[32];
u8 rx_secur_seq_cnt[16];
} __packed;
/**
* struct iwl_mvm_add_sta_key_cmd_v1 - add/modify sta key
* @common: see &struct iwl_mvm_add_sta_key_common
* @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
* @reserved: reserved
* @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
*/
struct iwl_mvm_add_sta_key_cmd_v1 {
struct iwl_mvm_add_sta_key_common common;
u8 tkip_rx_tsc_byte2;
u8 reserved;
__le16 tkip_rx_ttak[5];
} __packed; /* ADD_MODIFY_STA_KEY_API_S_VER_1 */
/**
* struct iwl_mvm_add_sta_key_cmd - add/modify sta key
* @common: see &struct iwl_mvm_add_sta_key_common
* @rx_mic_key: TKIP RX unicast or multicast key
* @tx_mic_key: TKIP TX key
* @transmit_seq_cnt: TSC, transmit packet number
*
* Note: This is used for both v2 and v3, the difference being
* in the way the common.rx_secur_seq_cnt is used, in v2 that's
* the strange hole format, in v3 it's just a u64.
*/
struct iwl_mvm_add_sta_key_cmd {
struct iwl_mvm_add_sta_key_common common;
__le64 rx_mic_key;
__le64 tx_mic_key;
__le64 transmit_seq_cnt;
} __packed; /* ADD_MODIFY_STA_KEY_API_S_VER_2, ADD_MODIFY_STA_KEY_API_S_VER_3 */
/**
* enum iwl_mvm_add_sta_rsp_status - status in the response to ADD_STA command
* @ADD_STA_SUCCESS: operation was executed successfully
* @ADD_STA_STATIONS_OVERLOAD: no room left in the fw's station table
* @ADD_STA_IMMEDIATE_BA_FAILURE: can't add Rx block ack session
* @ADD_STA_MODIFY_NON_EXISTING_STA: driver requested to modify a station that
* doesn't exist.
*/
enum iwl_mvm_add_sta_rsp_status {
ADD_STA_SUCCESS = 0x1,
ADD_STA_STATIONS_OVERLOAD = 0x2,
ADD_STA_IMMEDIATE_BA_FAILURE = 0x4,
ADD_STA_MODIFY_NON_EXISTING_STA = 0x8,
};
/**
* struct iwl_mvm_rm_sta_cmd - Add / modify a station in the fw's station table
* ( REMOVE_STA = 0x19 )
* @sta_id: the station id of the station to be removed
* @reserved: reserved
*/
struct iwl_mvm_rm_sta_cmd {
u8 sta_id;
u8 reserved[3];
} __packed; /* REMOVE_STA_CMD_API_S_VER_2 */
/**
* struct iwl_mvm_mgmt_mcast_key_cmd_v1
* ( MGMT_MCAST_KEY = 0x1f )
* @ctrl_flags: &enum iwl_sta_key_flag
* @igtk: IGTK key material
* @k1: unused
* @k2: unused
* @sta_id: station ID that support IGTK
* @key_id: key ID
* @receive_seq_cnt: initial RSC/PN needed for replay check
*/
struct iwl_mvm_mgmt_mcast_key_cmd_v1 {
__le32 ctrl_flags;
u8 igtk[16];
u8 k1[16];
u8 k2[16];
__le32 key_id;
__le32 sta_id;
__le64 receive_seq_cnt;
} __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_1 */
/**
* struct iwl_mvm_mgmt_mcast_key_cmd
* ( MGMT_MCAST_KEY = 0x1f )
* @ctrl_flags: &enum iwl_sta_key_flag
* @igtk: IGTK master key
* @sta_id: station ID that support IGTK
* @key_id: key ID
* @receive_seq_cnt: initial RSC/PN needed for replay check
*/
struct iwl_mvm_mgmt_mcast_key_cmd {
__le32 ctrl_flags;
u8 igtk[32];
__le32 key_id;
__le32 sta_id;
__le64 receive_seq_cnt;
} __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_2 */
struct iwl_mvm_wep_key {
u8 key_index;
u8 key_offset;
__le16 reserved1;
u8 key_size;
u8 reserved2[3];
u8 key[16];
} __packed;
struct iwl_mvm_wep_key_cmd {
__le32 mac_id_n_color;
u8 num_keys;
u8 decryption_type;
u8 flags;
u8 reserved;
struct iwl_mvm_wep_key wep_key[];
} __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */
/**
* struct iwl_mvm_eosp_notification - EOSP notification from firmware
* @remain_frame_count: # of frames remaining, non-zero if SP was cut
* short by GO absence
* @sta_id: station ID
*/
struct iwl_mvm_eosp_notification {
__le32 remain_frame_count;
__le32 sta_id;
} __packed; /* UAPSD_EOSP_NTFY_API_S_VER_1 */
#endif /* __iwl_fw_api_sta_h__ */