2023-08-30 17:31:07 +02:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Copyright (c) 2015 MediaTek Inc.
|
|
|
|
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
#include <linux/clk.h>
|
2023-10-24 12:59:35 +02:00
|
|
|
#include <linux/debugfs.h>
|
2023-08-30 17:31:07 +02:00
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/iopoll.h>
|
|
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/nvmem-consumer.h>
|
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/of_device.h>
|
|
|
|
#include <linux/phy/phy.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
|
|
|
|
#include "phy-mtk-io.h"
|
|
|
|
|
|
|
|
/* version V1 sub-banks offset base address */
|
|
|
|
/* banks shared by multiple phys */
|
|
|
|
#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */
|
|
|
|
#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
|
|
|
|
#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */
|
|
|
|
/* u2 phy bank */
|
|
|
|
#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
|
|
|
|
/* u3/pcie/sata phy banks */
|
|
|
|
#define SSUSB_SIFSLV_V1_U3PHYD 0x000
|
|
|
|
#define SSUSB_SIFSLV_V1_U3PHYA 0x200
|
|
|
|
|
|
|
|
/* version V2/V3 sub-banks offset base address */
|
|
|
|
/* V3: U2FREQ is not used anymore, but reserved */
|
|
|
|
/* u2 phy banks */
|
|
|
|
#define SSUSB_SIFSLV_V2_MISC 0x000
|
|
|
|
#define SSUSB_SIFSLV_V2_U2FREQ 0x100
|
|
|
|
#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300
|
|
|
|
/* u3/pcie/sata phy banks */
|
|
|
|
#define SSUSB_SIFSLV_V2_SPLLC 0x000
|
|
|
|
#define SSUSB_SIFSLV_V2_CHIP 0x100
|
|
|
|
#define SSUSB_SIFSLV_V2_U3PHYD 0x200
|
|
|
|
#define SSUSB_SIFSLV_V2_U3PHYA 0x400
|
|
|
|
|
|
|
|
#define U3P_MISC_REG1 0x04
|
|
|
|
#define MR1_EFUSE_AUTO_LOAD_DIS BIT(6)
|
|
|
|
|
|
|
|
#define U3P_USBPHYACR0 0x000
|
|
|
|
#define PA0_RG_U2PLL_FORCE_ON BIT(15)
|
|
|
|
#define PA0_USB20_PLL_PREDIV GENMASK(7, 6)
|
|
|
|
#define PA0_RG_USB20_INTR_EN BIT(5)
|
|
|
|
|
|
|
|
#define U3P_USBPHYACR1 0x004
|
|
|
|
#define PA1_RG_INTR_CAL GENMASK(23, 19)
|
|
|
|
#define PA1_RG_VRT_SEL GENMASK(14, 12)
|
|
|
|
#define PA1_RG_TERM_SEL GENMASK(10, 8)
|
|
|
|
|
|
|
|
#define U3P_USBPHYACR2 0x008
|
|
|
|
#define PA2_RG_U2PLL_BW GENMASK(21, 19)
|
|
|
|
#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
|
|
|
|
|
|
|
|
#define U3P_USBPHYACR5 0x014
|
|
|
|
#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15)
|
|
|
|
#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
|
|
|
|
#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
|
|
|
|
|
|
|
|
#define U3P_USBPHYACR6 0x018
|
|
|
|
#define PA6_RG_U2_PRE_EMP GENMASK(31, 30)
|
|
|
|
#define PA6_RG_U2_BC11_SW_EN BIT(23)
|
|
|
|
#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
|
|
|
|
#define PA6_RG_U2_DISCTH GENMASK(7, 4)
|
|
|
|
#define PA6_RG_U2_SQTH GENMASK(3, 0)
|
|
|
|
|
|
|
|
#define U3P_U2PHYACR4 0x020
|
|
|
|
#define P2C_RG_USB20_GPIO_CTL BIT(9)
|
|
|
|
#define P2C_USB20_GPIO_MODE BIT(8)
|
|
|
|
#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
|
|
|
|
|
|
|
|
#define U3P_U2PHYA_RESV 0x030
|
|
|
|
#define P2R_RG_U2PLL_FBDIV_26M 0x1bb13b
|
|
|
|
#define P2R_RG_U2PLL_FBDIV_48M 0x3c0000
|
|
|
|
|
|
|
|
#define U3P_U2PHYA_RESV1 0x044
|
|
|
|
#define P2R_RG_U2PLL_REFCLK_SEL BIT(5)
|
|
|
|
#define P2R_RG_U2PLL_FRA_EN BIT(3)
|
|
|
|
|
|
|
|
#define U3D_U2PHYDCR0 0x060
|
|
|
|
#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
|
|
|
|
|
|
|
|
#define U3P_U2PHYDTM0 0x068
|
|
|
|
#define P2C_FORCE_UART_EN BIT(26)
|
|
|
|
#define P2C_FORCE_DATAIN BIT(23)
|
|
|
|
#define P2C_FORCE_DM_PULLDOWN BIT(21)
|
|
|
|
#define P2C_FORCE_DP_PULLDOWN BIT(20)
|
|
|
|
#define P2C_FORCE_XCVRSEL BIT(19)
|
|
|
|
#define P2C_FORCE_SUSPENDM BIT(18)
|
|
|
|
#define P2C_FORCE_TERMSEL BIT(17)
|
|
|
|
#define P2C_RG_DATAIN GENMASK(13, 10)
|
|
|
|
#define P2C_RG_DMPULLDOWN BIT(7)
|
|
|
|
#define P2C_RG_DPPULLDOWN BIT(6)
|
|
|
|
#define P2C_RG_XCVRSEL GENMASK(5, 4)
|
|
|
|
#define P2C_RG_SUSPENDM BIT(3)
|
|
|
|
#define P2C_RG_TERMSEL BIT(2)
|
|
|
|
#define P2C_DTM0_PART_MASK \
|
|
|
|
(P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
|
|
|
|
P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
|
|
|
|
P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
|
|
|
|
P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
|
|
|
|
|
|
|
|
#define U3P_U2PHYDTM1 0x06C
|
|
|
|
#define P2C_RG_UART_EN BIT(16)
|
|
|
|
#define P2C_FORCE_IDDIG BIT(9)
|
|
|
|
#define P2C_RG_VBUSVALID BIT(5)
|
|
|
|
#define P2C_RG_SESSEND BIT(4)
|
|
|
|
#define P2C_RG_AVALID BIT(2)
|
|
|
|
#define P2C_RG_IDDIG BIT(1)
|
|
|
|
|
|
|
|
#define U3P_U2PHYBC12C 0x080
|
|
|
|
#define P2C_RG_CHGDT_EN BIT(0)
|
|
|
|
|
|
|
|
#define U3P_U3_CHIP_GPIO_CTLD 0x0c
|
|
|
|
#define P3C_REG_IP_SW_RST BIT(31)
|
|
|
|
#define P3C_MCU_BUS_CK_GATE_EN BIT(30)
|
|
|
|
#define P3C_FORCE_IP_SW_RST BIT(29)
|
|
|
|
|
|
|
|
#define U3P_U3_CHIP_GPIO_CTLE 0x10
|
|
|
|
#define P3C_RG_SWRST_U3_PHYD BIT(25)
|
|
|
|
#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_REG0 0x000
|
|
|
|
#define P3A_RG_IEXT_INTR GENMASK(15, 10)
|
|
|
|
#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_REG1 0x004
|
|
|
|
#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_REG6 0x018
|
|
|
|
#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_REG9 0x024
|
|
|
|
#define P3A_RG_RX_DAC_MUX GENMASK(5, 1)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_DA_REG0 0x100
|
|
|
|
#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
|
|
|
|
#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12)
|
|
|
|
#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_DA_REG4 0x108
|
|
|
|
#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19)
|
|
|
|
#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_DA_REG5 0x10c
|
|
|
|
#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28)
|
|
|
|
#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_DA_REG6 0x110
|
|
|
|
#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_DA_REG7 0x114
|
|
|
|
#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_DA_REG20 0x13c
|
|
|
|
#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYA_DA_REG25 0x148
|
|
|
|
#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYD_LFPS1 0x00c
|
|
|
|
#define P3D_RG_FWAKE_TH GENMASK(21, 16)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYD_IMPCAL0 0x010
|
|
|
|
#define P3D_RG_FORCE_TX_IMPEL BIT(31)
|
|
|
|
#define P3D_RG_TX_IMPEL GENMASK(28, 24)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYD_IMPCAL1 0x014
|
|
|
|
#define P3D_RG_FORCE_RX_IMPEL BIT(31)
|
|
|
|
#define P3D_RG_RX_IMPEL GENMASK(28, 24)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYD_RSV 0x054
|
|
|
|
#define P3D_RG_EFUSE_AUTO_LOAD_DIS BIT(12)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYD_CDR1 0x05c
|
|
|
|
#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
|
|
|
|
#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYD_RXDET1 0x128
|
|
|
|
#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9)
|
|
|
|
|
|
|
|
#define U3P_U3_PHYD_RXDET2 0x12c
|
|
|
|
#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0)
|
|
|
|
|
|
|
|
#define U3P_SPLLC_XTALCTL3 0x018
|
|
|
|
#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
|
|
|
|
#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
|
|
|
|
|
|
|
|
#define U3P_U2FREQ_FMCR0 0x00
|
|
|
|
#define P2F_RG_MONCLK_SEL GENMASK(27, 26)
|
|
|
|
#define P2F_RG_FREQDET_EN BIT(24)
|
|
|
|
#define P2F_RG_CYCLECNT GENMASK(23, 0)
|
|
|
|
|
|
|
|
#define U3P_U2FREQ_VALUE 0x0c
|
|
|
|
|
|
|
|
#define U3P_U2FREQ_FMMONR1 0x10
|
|
|
|
#define P2F_USB_FM_VALID BIT(0)
|
|
|
|
#define P2F_RG_FRCK_EN BIT(8)
|
|
|
|
|
|
|
|
#define U3P_REF_CLK 26 /* MHZ */
|
|
|
|
#define U3P_SLEW_RATE_COEF 28
|
|
|
|
#define U3P_SR_COEF_DIVISOR 1000
|
|
|
|
#define U3P_FM_DET_CYCLE_CNT 1024
|
|
|
|
|
|
|
|
/* SATA register setting */
|
|
|
|
#define PHYD_CTRL_SIGNAL_MODE4 0x1c
|
|
|
|
/* CDR Charge Pump P-path current adjustment */
|
|
|
|
#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
|
|
|
|
#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
|
|
|
|
|
|
|
|
#define PHYD_DESIGN_OPTION2 0x24
|
|
|
|
/* Symbol lock count selection */
|
|
|
|
#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
|
|
|
|
|
|
|
|
#define PHYD_DESIGN_OPTION9 0x40
|
|
|
|
/* COMWAK GAP width window */
|
|
|
|
#define RG_TG_MAX_MSK GENMASK(20, 16)
|
|
|
|
/* COMINIT GAP width window */
|
|
|
|
#define RG_T2_MAX_MSK GENMASK(13, 8)
|
|
|
|
/* COMWAK GAP width window */
|
|
|
|
#define RG_TG_MIN_MSK GENMASK(7, 5)
|
|
|
|
/* COMINIT GAP width window */
|
|
|
|
#define RG_T2_MIN_MSK GENMASK(4, 0)
|
|
|
|
|
|
|
|
#define ANA_RG_CTRL_SIGNAL1 0x4c
|
|
|
|
/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
|
|
|
|
#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
|
|
|
|
|
|
|
|
#define ANA_RG_CTRL_SIGNAL4 0x58
|
|
|
|
#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
|
|
|
|
/* Loop filter R1 resistance adjustment for Gen1 speed */
|
|
|
|
#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
|
|
|
|
|
|
|
|
#define ANA_RG_CTRL_SIGNAL6 0x60
|
|
|
|
/* I-path capacitance adjustment for Gen1 */
|
|
|
|
#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
|
|
|
|
#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
|
|
|
|
|
|
|
|
#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
|
|
|
|
/* RX Gen1 LEQ tuning step */
|
|
|
|
#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
|
|
|
|
|
|
|
|
#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
|
|
|
|
#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
|
|
|
|
|
|
|
|
#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
|
|
|
|
#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
|
|
|
|
|
|
|
|
/* PHY switch between pcie/usb3/sgmii/sata */
|
|
|
|
#define USB_PHY_SWITCH_CTRL 0x0
|
|
|
|
#define RG_PHY_SW_TYPE GENMASK(3, 0)
|
|
|
|
#define RG_PHY_SW_PCIE 0x0
|
|
|
|
#define RG_PHY_SW_USB3 0x1
|
|
|
|
#define RG_PHY_SW_SGMII 0x2
|
|
|
|
#define RG_PHY_SW_SATA 0x3
|
|
|
|
|
|
|
|
#define TPHY_CLKS_CNT 2
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
enum mtk_phy_version {
|
|
|
|
MTK_PHY_V1 = 1,
|
|
|
|
MTK_PHY_V2,
|
|
|
|
MTK_PHY_V3,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct mtk_phy_pdata {
|
|
|
|
/* avoid RX sensitivity level degradation only for mt8173 */
|
|
|
|
bool avoid_rx_sen_degradation;
|
|
|
|
/*
|
|
|
|
* workaround only for mt8195, HW fix it for others of V3,
|
|
|
|
* u2phy should use integer mode instead of fractional mode of
|
|
|
|
* 48M PLL, fix it by switching PLL to 26M from default 48M
|
|
|
|
*/
|
|
|
|
bool sw_pll_48m_to_26m;
|
|
|
|
/*
|
|
|
|
* Some SoCs (e.g. mt8195) drop a bit when use auto load efuse,
|
|
|
|
* support sw way, also support it for v2/v3 optionally.
|
|
|
|
*/
|
|
|
|
bool sw_efuse_supported;
|
|
|
|
enum mtk_phy_version version;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct u2phy_banks {
|
|
|
|
void __iomem *misc;
|
|
|
|
void __iomem *fmreg;
|
|
|
|
void __iomem *com;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct u3phy_banks {
|
|
|
|
void __iomem *spllc;
|
|
|
|
void __iomem *chip;
|
|
|
|
void __iomem *phyd; /* include u3phyd_bank2 */
|
|
|
|
void __iomem *phya; /* include u3phya_da */
|
|
|
|
};
|
|
|
|
|
|
|
|
struct mtk_phy_instance {
|
|
|
|
struct phy *phy;
|
|
|
|
void __iomem *port_base;
|
|
|
|
union {
|
|
|
|
struct u2phy_banks u2_banks;
|
|
|
|
struct u3phy_banks u3_banks;
|
|
|
|
};
|
|
|
|
struct clk_bulk_data clks[TPHY_CLKS_CNT];
|
|
|
|
u32 index;
|
|
|
|
u32 type;
|
|
|
|
struct regmap *type_sw;
|
|
|
|
u32 type_sw_reg;
|
|
|
|
u32 type_sw_index;
|
|
|
|
u32 efuse_sw_en;
|
|
|
|
u32 efuse_intr;
|
|
|
|
u32 efuse_tx_imp;
|
|
|
|
u32 efuse_rx_imp;
|
|
|
|
int eye_src;
|
|
|
|
int eye_vrt;
|
|
|
|
int eye_term;
|
|
|
|
int intr;
|
|
|
|
int discth;
|
|
|
|
int pre_emphasis;
|
|
|
|
bool bc12_en;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct mtk_tphy {
|
|
|
|
struct device *dev;
|
|
|
|
void __iomem *sif_base; /* only shared sif */
|
|
|
|
const struct mtk_phy_pdata *pdata;
|
|
|
|
struct mtk_phy_instance **phys;
|
|
|
|
int nphys;
|
|
|
|
int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
|
|
|
|
int src_coef; /* coefficient for slew rate calibrate */
|
|
|
|
};
|
|
|
|
|
2023-10-24 12:59:35 +02:00
|
|
|
#if IS_ENABLED(CONFIG_DEBUG_FS)
|
|
|
|
|
|
|
|
enum u2_phy_params {
|
|
|
|
U2P_EYE_VRT = 0,
|
|
|
|
U2P_EYE_TERM,
|
|
|
|
U2P_EFUSE_EN,
|
|
|
|
U2P_EFUSE_INTR,
|
|
|
|
U2P_DISCTH,
|
|
|
|
U2P_PRE_EMPHASIS,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum u3_phy_params {
|
|
|
|
U3P_EFUSE_EN = 0,
|
|
|
|
U3P_EFUSE_INTR,
|
|
|
|
U3P_EFUSE_TX_IMP,
|
|
|
|
U3P_EFUSE_RX_IMP,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const char *const u2_phy_files[] = {
|
|
|
|
[U2P_EYE_VRT] = "vrt",
|
|
|
|
[U2P_EYE_TERM] = "term",
|
|
|
|
[U2P_EFUSE_EN] = "efuse",
|
|
|
|
[U2P_EFUSE_INTR] = "intr",
|
|
|
|
[U2P_DISCTH] = "discth",
|
|
|
|
[U2P_PRE_EMPHASIS] = "preemph",
|
|
|
|
};
|
|
|
|
|
|
|
|
static const char *const u3_phy_files[] = {
|
|
|
|
[U3P_EFUSE_EN] = "efuse",
|
|
|
|
[U3P_EFUSE_INTR] = "intr",
|
|
|
|
[U3P_EFUSE_TX_IMP] = "tx-imp",
|
|
|
|
[U3P_EFUSE_RX_IMP] = "rx-imp",
|
|
|
|
};
|
|
|
|
|
|
|
|
static int u2_phy_params_show(struct seq_file *sf, void *unused)
|
|
|
|
{
|
|
|
|
struct mtk_phy_instance *inst = sf->private;
|
|
|
|
const char *fname = file_dentry(sf->file)->d_iname;
|
|
|
|
struct u2phy_banks *u2_banks = &inst->u2_banks;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
u32 max = 0;
|
|
|
|
u32 tmp = 0;
|
|
|
|
u32 val = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
switch (ret) {
|
|
|
|
case U2P_EYE_VRT:
|
|
|
|
tmp = readl(com + U3P_USBPHYACR1);
|
|
|
|
val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
|
|
|
|
max = FIELD_MAX(PA1_RG_VRT_SEL);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_EYE_TERM:
|
|
|
|
tmp = readl(com + U3P_USBPHYACR1);
|
|
|
|
val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
|
|
|
|
max = FIELD_MAX(PA1_RG_TERM_SEL);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_EFUSE_EN:
|
|
|
|
if (u2_banks->misc) {
|
|
|
|
tmp = readl(u2_banks->misc + U3P_MISC_REG1);
|
|
|
|
max = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_EFUSE_INTR:
|
|
|
|
tmp = readl(com + U3P_USBPHYACR1);
|
|
|
|
val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
|
|
|
|
max = FIELD_MAX(PA1_RG_INTR_CAL);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_DISCTH:
|
|
|
|
tmp = readl(com + U3P_USBPHYACR6);
|
|
|
|
val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
|
|
|
|
max = FIELD_MAX(PA6_RG_U2_DISCTH);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_PRE_EMPHASIS:
|
|
|
|
tmp = readl(com + U3P_USBPHYACR6);
|
|
|
|
val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
|
|
|
|
max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
seq_printf(sf, "invalid, %d\n", ret);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int u2_phy_params_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return single_open(file, u2_phy_params_show, inode->i_private);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
const char *fname = file_dentry(file)->d_iname;
|
|
|
|
struct seq_file *sf = file->private_data;
|
|
|
|
struct mtk_phy_instance *inst = sf->private;
|
|
|
|
struct u2phy_banks *u2_banks = &inst->u2_banks;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
ssize_t rc;
|
|
|
|
u32 val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
|
|
|
|
if (ret < 0)
|
|
|
|
return (ssize_t)ret;
|
|
|
|
|
|
|
|
switch (ret) {
|
|
|
|
case U2P_EYE_VRT:
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_EYE_TERM:
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_EFUSE_EN:
|
|
|
|
if (u2_banks->misc)
|
|
|
|
mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
|
|
|
|
MR1_EFUSE_AUTO_LOAD_DIS, !!val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_EFUSE_INTR:
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_DISCTH:
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U2P_PRE_EMPHASIS:
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations u2_phy_fops = {
|
|
|
|
.open = u2_phy_params_open,
|
|
|
|
.write = u2_phy_params_write,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = single_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
|
|
|
|
{
|
|
|
|
u32 count = ARRAY_SIZE(u2_phy_files);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < count; i++)
|
|
|
|
debugfs_create_file(u2_phy_files[i], 0644, inst->phy->debugfs,
|
|
|
|
inst, &u2_phy_fops);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int u3_phy_params_show(struct seq_file *sf, void *unused)
|
|
|
|
{
|
|
|
|
struct mtk_phy_instance *inst = sf->private;
|
|
|
|
const char *fname = file_dentry(sf->file)->d_iname;
|
|
|
|
struct u3phy_banks *u3_banks = &inst->u3_banks;
|
|
|
|
u32 val = 0;
|
|
|
|
u32 max = 0;
|
|
|
|
u32 tmp;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
switch (ret) {
|
|
|
|
case U3P_EFUSE_EN:
|
|
|
|
tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
|
|
|
|
val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
|
|
|
|
max = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U3P_EFUSE_INTR:
|
|
|
|
tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
|
|
|
|
val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
|
|
|
|
max = FIELD_MAX(P3A_RG_IEXT_INTR);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U3P_EFUSE_TX_IMP:
|
|
|
|
tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
|
|
|
|
val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
|
|
|
|
max = FIELD_MAX(P3D_RG_TX_IMPEL);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U3P_EFUSE_RX_IMP:
|
|
|
|
tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
|
|
|
|
val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
|
|
|
|
max = FIELD_MAX(P3D_RG_RX_IMPEL);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
seq_printf(sf, "invalid, %d\n", ret);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int u3_phy_params_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return single_open(file, u3_phy_params_show, inode->i_private);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
const char *fname = file_dentry(file)->d_iname;
|
|
|
|
struct seq_file *sf = file->private_data;
|
|
|
|
struct mtk_phy_instance *inst = sf->private;
|
|
|
|
struct u3phy_banks *u3_banks = &inst->u3_banks;
|
|
|
|
void __iomem *phyd = u3_banks->phyd;
|
|
|
|
ssize_t rc;
|
|
|
|
u32 val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
|
|
|
|
if (ret < 0)
|
|
|
|
return (ssize_t)ret;
|
|
|
|
|
|
|
|
switch (ret) {
|
|
|
|
case U3P_EFUSE_EN:
|
|
|
|
mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
|
|
|
|
P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U3P_EFUSE_INTR:
|
|
|
|
mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0,
|
|
|
|
P3A_RG_IEXT_INTR, val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U3P_EFUSE_TX_IMP:
|
|
|
|
mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
|
|
|
|
mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case U3P_EFUSE_RX_IMP:
|
|
|
|
mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
|
|
|
|
mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations u3_phy_fops = {
|
|
|
|
.open = u3_phy_params_open,
|
|
|
|
.write = u3_phy_params_write,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = single_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
|
|
|
|
{
|
|
|
|
u32 count = ARRAY_SIZE(u3_phy_files);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < count; i++)
|
|
|
|
debugfs_create_file(u3_phy_files[i], 0644, inst->phy->debugfs,
|
|
|
|
inst, &u3_phy_fops);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int phy_type_show(struct seq_file *sf, void *unused)
|
|
|
|
{
|
|
|
|
struct mtk_phy_instance *inst = sf->private;
|
|
|
|
const char *type;
|
|
|
|
|
|
|
|
switch (inst->type) {
|
|
|
|
case PHY_TYPE_USB2:
|
|
|
|
type = "USB2";
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
type = "USB3";
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
type = "PCIe";
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SGMII:
|
|
|
|
type = "SGMII";
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SATA:
|
|
|
|
type = "SATA";
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
type = "";
|
|
|
|
}
|
|
|
|
|
|
|
|
seq_printf(sf, "%s\n", type);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
DEFINE_SHOW_ATTRIBUTE(phy_type);
|
|
|
|
|
|
|
|
/* these files will be removed when phy is released by phy core */
|
|
|
|
static void phy_debugfs_init(struct mtk_phy_instance *inst)
|
|
|
|
{
|
|
|
|
debugfs_create_file("type", 0444, inst->phy->debugfs, inst, &phy_type_fops);
|
|
|
|
|
|
|
|
switch (inst->type) {
|
|
|
|
case PHY_TYPE_USB2:
|
|
|
|
u2_phy_dbgfs_files_create(inst);
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
u3_phy_dbgfs_files_create(inst);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
static void phy_debugfs_init(struct mtk_phy_instance *inst)
|
|
|
|
{}
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
2023-08-30 17:31:07 +02:00
|
|
|
static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
void __iomem *fmreg = u2_banks->fmreg;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
int calibration_val;
|
|
|
|
int fm_out;
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
/* HW V3 doesn't support slew rate cal anymore */
|
|
|
|
if (tphy->pdata->version == MTK_PHY_V3)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* use force value */
|
|
|
|
if (instance->eye_src)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* enable USB ring oscillator */
|
|
|
|
mtk_phy_set_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCAL_EN);
|
|
|
|
udelay(1);
|
|
|
|
|
|
|
|
/*enable free run clock */
|
|
|
|
mtk_phy_set_bits(fmreg + U3P_U2FREQ_FMMONR1, P2F_RG_FRCK_EN);
|
|
|
|
|
|
|
|
/* set cycle count as 1024, and select u2 channel */
|
|
|
|
tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
|
|
|
|
tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
|
|
|
|
tmp |= FIELD_PREP(P2F_RG_CYCLECNT, U3P_FM_DET_CYCLE_CNT);
|
|
|
|
if (tphy->pdata->version == MTK_PHY_V1)
|
|
|
|
tmp |= FIELD_PREP(P2F_RG_MONCLK_SEL, instance->index >> 1);
|
|
|
|
|
|
|
|
writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
|
|
|
|
|
|
|
|
/* enable frequency meter */
|
|
|
|
mtk_phy_set_bits(fmreg + U3P_U2FREQ_FMCR0, P2F_RG_FREQDET_EN);
|
|
|
|
|
|
|
|
/* ignore return value */
|
|
|
|
readl_poll_timeout(fmreg + U3P_U2FREQ_FMMONR1, tmp,
|
|
|
|
(tmp & P2F_USB_FM_VALID), 10, 200);
|
|
|
|
|
|
|
|
fm_out = readl(fmreg + U3P_U2FREQ_VALUE);
|
|
|
|
|
|
|
|
/* disable frequency meter */
|
|
|
|
mtk_phy_clear_bits(fmreg + U3P_U2FREQ_FMCR0, P2F_RG_FREQDET_EN);
|
|
|
|
|
|
|
|
/*disable free run clock */
|
|
|
|
mtk_phy_clear_bits(fmreg + U3P_U2FREQ_FMMONR1, P2F_RG_FRCK_EN);
|
|
|
|
|
|
|
|
if (fm_out) {
|
|
|
|
/* ( 1024 / FM_OUT ) x reference clock frequency x coef */
|
|
|
|
tmp = tphy->src_ref_clk * tphy->src_coef;
|
|
|
|
tmp = (tmp * U3P_FM_DET_CYCLE_CNT) / fm_out;
|
|
|
|
calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR);
|
|
|
|
} else {
|
|
|
|
/* if FM detection fail, set default value */
|
|
|
|
calibration_val = 4;
|
|
|
|
}
|
|
|
|
dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n",
|
|
|
|
instance->index, fm_out, calibration_val,
|
|
|
|
tphy->src_ref_clk, tphy->src_coef);
|
|
|
|
|
|
|
|
/* set HS slew rate */
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
|
|
|
|
calibration_val);
|
|
|
|
|
|
|
|
/* disable USB ring oscillator */
|
|
|
|
mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCAL_EN);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void u3_phy_instance_init(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u3phy_banks *u3_banks = &instance->u3_banks;
|
|
|
|
void __iomem *phya = u3_banks->phya;
|
|
|
|
void __iomem *phyd = u3_banks->phyd;
|
|
|
|
|
|
|
|
/* gating PCIe Analog XTAL clock */
|
|
|
|
mtk_phy_set_bits(u3_banks->spllc + U3P_SPLLC_XTALCTL3,
|
|
|
|
XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD);
|
|
|
|
|
|
|
|
/* gating XSQ */
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG0, P3A_RG_XTAL_EXT_EN_U3, 2);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_REG9, P3A_RG_RX_DAC_MUX, 4);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_REG6, P3A_RG_TX_EIDLE_CM, 0xe);
|
|
|
|
|
|
|
|
mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_CDR1,
|
|
|
|
P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1,
|
|
|
|
FIELD_PREP(P3D_RG_CDR_BIR_LTD0, 0xc) |
|
|
|
|
FIELD_PREP(P3D_RG_CDR_BIR_LTD1, 0x3));
|
|
|
|
|
|
|
|
mtk_phy_update_field(phyd + U3P_U3_PHYD_LFPS1, P3D_RG_FWAKE_TH, 0x34);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET1, P3D_RG_RXDET_STB2_SET, 0x10);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET2, P3D_RG_RXDET_STB2_SET_P3, 0x10);
|
|
|
|
|
|
|
|
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void u2_phy_pll_26m_set(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
|
|
|
|
if (!tphy->pdata->sw_pll_48m_to_26m)
|
|
|
|
return;
|
|
|
|
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV, 0);
|
|
|
|
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW, 3);
|
|
|
|
|
|
|
|
writel(P2R_RG_U2PLL_FBDIV_26M, com + U3P_U2PHYA_RESV);
|
|
|
|
|
|
|
|
mtk_phy_set_bits(com + U3P_U2PHYA_RESV1,
|
|
|
|
P2R_RG_U2PLL_FRA_EN | P2R_RG_U2PLL_REFCLK_SEL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void u2_phy_instance_init(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
u32 index = instance->index;
|
|
|
|
|
|
|
|
/* switch to USB function, and enable usb pll */
|
|
|
|
mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(com + U3P_U2PHYDTM0,
|
|
|
|
P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_UART_EN);
|
|
|
|
|
|
|
|
mtk_phy_set_bits(com + U3P_USBPHYACR0, PA0_RG_USB20_INTR_EN);
|
|
|
|
|
|
|
|
/* disable switch 100uA current to SSUSB */
|
|
|
|
mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
|
|
|
|
|
|
|
|
if (tphy->pdata->avoid_rx_sen_degradation) {
|
|
|
|
if (!index) {
|
|
|
|
mtk_phy_set_bits(com + U3P_USBPHYACR2, PA2_RG_SIF_U2PLL_FORCE_EN);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
|
|
|
|
} else {
|
|
|
|
mtk_phy_set_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
|
|
|
|
|
|
|
|
mtk_phy_set_bits(com + U3P_U2PHYDTM0,
|
|
|
|
P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* DP/DM BC1.1 path Disable */
|
|
|
|
mtk_phy_clear_bits(com + U3P_USBPHYACR6, PA6_RG_U2_BC11_SW_EN);
|
|
|
|
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_SQTH, 2);
|
|
|
|
|
|
|
|
/* Workaround only for mt8195, HW fix it for others (V3) */
|
|
|
|
u2_phy_pll_26m_set(tphy, instance);
|
|
|
|
|
|
|
|
dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void u2_phy_instance_power_on(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
u32 index = instance->index;
|
|
|
|
|
|
|
|
/* OTG Enable */
|
|
|
|
mtk_phy_set_bits(com + U3P_USBPHYACR6, PA6_RG_U2_OTG_VBUSCMP_EN);
|
|
|
|
|
|
|
|
mtk_phy_set_bits(com + U3P_U2PHYDTM1, P2C_RG_VBUSVALID | P2C_RG_AVALID);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_SESSEND);
|
|
|
|
|
|
|
|
if (tphy->pdata->avoid_rx_sen_degradation && index) {
|
|
|
|
mtk_phy_set_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
|
|
|
|
|
|
|
|
mtk_phy_set_bits(com + U3P_U2PHYDTM0, P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM);
|
|
|
|
}
|
|
|
|
dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void u2_phy_instance_power_off(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
u32 index = instance->index;
|
|
|
|
|
|
|
|
/* OTG Disable */
|
|
|
|
mtk_phy_clear_bits(com + U3P_USBPHYACR6, PA6_RG_U2_OTG_VBUSCMP_EN);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_VBUSVALID | P2C_RG_AVALID);
|
|
|
|
|
|
|
|
mtk_phy_set_bits(com + U3P_U2PHYDTM1, P2C_RG_SESSEND);
|
|
|
|
|
|
|
|
if (tphy->pdata->avoid_rx_sen_degradation && index) {
|
|
|
|
mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void u2_phy_instance_exit(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
u32 index = instance->index;
|
|
|
|
|
|
|
|
if (tphy->pdata->avoid_rx_sen_degradation && index) {
|
|
|
|
mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_FORCE_SUSPENDM);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance,
|
|
|
|
enum phy_mode mode)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
|
|
|
|
switch (mode) {
|
|
|
|
case PHY_MODE_USB_DEVICE:
|
|
|
|
tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
|
|
|
|
break;
|
|
|
|
case PHY_MODE_USB_HOST:
|
|
|
|
tmp |= P2C_FORCE_IDDIG;
|
|
|
|
tmp &= ~P2C_RG_IDDIG;
|
|
|
|
break;
|
|
|
|
case PHY_MODE_USB_OTG:
|
|
|
|
tmp &= ~(P2C_FORCE_IDDIG | P2C_RG_IDDIG);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
writel(tmp, u2_banks->com + U3P_U2PHYDTM1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pcie_phy_instance_init(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u3phy_banks *u3_banks = &instance->u3_banks;
|
|
|
|
void __iomem *phya = u3_banks->phya;
|
|
|
|
|
|
|
|
if (tphy->pdata->version != MTK_PHY_V1)
|
|
|
|
return;
|
|
|
|
|
|
|
|
mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG0,
|
|
|
|
P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H,
|
|
|
|
FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) |
|
|
|
|
FIELD_PREP(P3A_RG_XTAL_EXT_PE2H, 0x2));
|
|
|
|
|
|
|
|
/* ref clk drive */
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP, 0x4);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF, 0x1);
|
|
|
|
|
|
|
|
/* SSC delta -5000ppm */
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG20, P3A_RG_PLL_DELTA1_PE2H, 0x3c);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG25, P3A_RG_PLL_DELTA_PE2H, 0x36);
|
|
|
|
|
|
|
|
/* change pll BW 0.6M */
|
|
|
|
mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG5,
|
|
|
|
P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H,
|
|
|
|
FIELD_PREP(P3A_RG_PLL_BR_PE2H, 0x1) |
|
|
|
|
FIELD_PREP(P3A_RG_PLL_IC_PE2H, 0x1));
|
|
|
|
|
|
|
|
mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG4,
|
|
|
|
P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H,
|
|
|
|
FIELD_PREP(P3A_RG_PLL_BC_PE2H, 0x3));
|
|
|
|
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG6, P3A_RG_PLL_IR_PE2H, 0x2);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG7, P3A_RG_PLL_BP_PE2H, 0xa);
|
|
|
|
|
|
|
|
/* Tx Detect Rx Timing: 10us -> 5us */
|
|
|
|
mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET1,
|
|
|
|
P3D_RG_RXDET_STB2_SET, 0x10);
|
|
|
|
|
|
|
|
mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET2,
|
|
|
|
P3D_RG_RXDET_STB2_SET_P3, 0x10);
|
|
|
|
|
|
|
|
/* wait for PCIe subsys register to active */
|
|
|
|
usleep_range(2500, 3000);
|
|
|
|
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u3phy_banks *bank = &instance->u3_banks;
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLD,
|
|
|
|
P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST);
|
|
|
|
|
|
|
|
mtk_phy_clear_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLE,
|
|
|
|
P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pcie_phy_instance_power_off(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
|
|
|
|
{
|
|
|
|
struct u3phy_banks *bank = &instance->u3_banks;
|
|
|
|
|
|
|
|
mtk_phy_set_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLD,
|
|
|
|
P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST);
|
|
|
|
|
|
|
|
mtk_phy_set_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLE,
|
|
|
|
P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sata_phy_instance_init(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u3phy_banks *u3_banks = &instance->u3_banks;
|
|
|
|
void __iomem *phyd = u3_banks->phyd;
|
|
|
|
|
|
|
|
/* charge current adjustment */
|
|
|
|
mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL6,
|
|
|
|
RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK,
|
|
|
|
FIELD_PREP(RG_CDR_BIRLTR_GEN1_MSK, 0x6) |
|
|
|
|
FIELD_PREP(RG_CDR_BC_GEN1_MSK, 0x1a));
|
|
|
|
|
|
|
|
mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL4, RG_CDR_BIRLTD0_GEN1_MSK, 0x18);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL5, RG_CDR_BIRLTD0_GEN3_MSK, 0x06);
|
|
|
|
|
|
|
|
mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL4,
|
|
|
|
RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK,
|
|
|
|
FIELD_PREP(RG_CDR_BICLTR_GEN1_MSK, 0x0c) |
|
|
|
|
FIELD_PREP(RG_CDR_BR_GEN2_MSK, 0x07));
|
|
|
|
|
|
|
|
mtk_phy_update_bits(phyd + PHYD_CTRL_SIGNAL_MODE4,
|
|
|
|
RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK,
|
|
|
|
FIELD_PREP(RG_CDR_BICLTD0_GEN1_MSK, 0x08) |
|
|
|
|
FIELD_PREP(RG_CDR_BICLTD1_GEN1_MSK, 0x02));
|
|
|
|
|
|
|
|
mtk_phy_update_field(phyd + PHYD_DESIGN_OPTION2, RG_LOCK_CNT_SEL_MSK, 0x02);
|
|
|
|
|
|
|
|
mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9,
|
|
|
|
RG_T2_MIN_MSK | RG_TG_MIN_MSK,
|
|
|
|
FIELD_PREP(RG_T2_MIN_MSK, 0x12) |
|
|
|
|
FIELD_PREP(RG_TG_MIN_MSK, 0x04));
|
|
|
|
|
|
|
|
mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9,
|
|
|
|
RG_T2_MAX_MSK | RG_TG_MAX_MSK,
|
|
|
|
FIELD_PREP(RG_T2_MAX_MSK, 0x31) |
|
|
|
|
FIELD_PREP(RG_TG_MAX_MSK, 0x0e));
|
|
|
|
|
|
|
|
mtk_phy_update_field(phyd + ANA_RG_CTRL_SIGNAL1, RG_IDRV_0DB_GEN1_MSK, 0x20);
|
|
|
|
|
|
|
|
mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL1, RG_EQ_DLEQ_LFI_GEN1_MSK, 0x03);
|
|
|
|
|
|
|
|
dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void phy_v1_banks_init(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
struct u3phy_banks *u3_banks = &instance->u3_banks;
|
|
|
|
|
|
|
|
switch (instance->type) {
|
|
|
|
case PHY_TYPE_USB2:
|
|
|
|
u2_banks->misc = NULL;
|
|
|
|
u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
|
|
|
|
u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
|
|
|
|
u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
|
|
|
|
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
|
|
|
|
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SATA:
|
|
|
|
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(tphy->dev, "incompatible PHY type\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void phy_v2_banks_init(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
struct u3phy_banks *u3_banks = &instance->u3_banks;
|
|
|
|
|
|
|
|
switch (instance->type) {
|
|
|
|
case PHY_TYPE_USB2:
|
|
|
|
u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
|
|
|
|
u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
|
|
|
|
u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
|
|
|
|
u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
|
|
|
|
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
|
|
|
|
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(tphy->dev, "incompatible PHY type\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void phy_parse_property(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct device *dev = &instance->phy->dev;
|
|
|
|
|
|
|
|
if (instance->type != PHY_TYPE_USB2)
|
|
|
|
return;
|
|
|
|
|
|
|
|
instance->bc12_en = device_property_read_bool(dev, "mediatek,bc12");
|
|
|
|
device_property_read_u32(dev, "mediatek,eye-src",
|
|
|
|
&instance->eye_src);
|
|
|
|
device_property_read_u32(dev, "mediatek,eye-vrt",
|
|
|
|
&instance->eye_vrt);
|
|
|
|
device_property_read_u32(dev, "mediatek,eye-term",
|
|
|
|
&instance->eye_term);
|
|
|
|
device_property_read_u32(dev, "mediatek,intr",
|
|
|
|
&instance->intr);
|
|
|
|
device_property_read_u32(dev, "mediatek,discth",
|
|
|
|
&instance->discth);
|
|
|
|
device_property_read_u32(dev, "mediatek,pre-emphasis",
|
|
|
|
&instance->pre_emphasis);
|
|
|
|
dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, intr:%d, disc:%d\n",
|
|
|
|
instance->bc12_en, instance->eye_src,
|
|
|
|
instance->eye_vrt, instance->eye_term,
|
|
|
|
instance->intr, instance->discth);
|
|
|
|
dev_dbg(dev, "pre-emp:%d\n", instance->pre_emphasis);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void u2_phy_props_set(struct mtk_tphy *tphy,
|
|
|
|
struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
void __iomem *com = u2_banks->com;
|
|
|
|
|
|
|
|
if (instance->bc12_en) /* BC1.2 path Enable */
|
|
|
|
mtk_phy_set_bits(com + U3P_U2PHYBC12C, P2C_RG_CHGDT_EN);
|
|
|
|
|
|
|
|
if (tphy->pdata->version < MTK_PHY_V3 && instance->eye_src)
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
|
|
|
|
instance->eye_src);
|
|
|
|
|
|
|
|
if (instance->eye_vrt)
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL,
|
|
|
|
instance->eye_vrt);
|
|
|
|
|
|
|
|
if (instance->eye_term)
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL,
|
|
|
|
instance->eye_term);
|
|
|
|
|
|
|
|
if (instance->intr) {
|
|
|
|
if (u2_banks->misc)
|
|
|
|
mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1,
|
|
|
|
MR1_EFUSE_AUTO_LOAD_DIS);
|
|
|
|
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL,
|
|
|
|
instance->intr);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (instance->discth)
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH,
|
|
|
|
instance->discth);
|
|
|
|
|
|
|
|
if (instance->pre_emphasis)
|
|
|
|
mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP,
|
|
|
|
instance->pre_emphasis);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* type switch for usb3/pcie/sgmii/sata */
|
|
|
|
static int phy_type_syscon_get(struct mtk_phy_instance *instance,
|
|
|
|
struct device_node *dn)
|
|
|
|
{
|
|
|
|
struct of_phandle_args args;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* type switch function is optional */
|
|
|
|
if (!of_property_read_bool(dn, "mediatek,syscon-type"))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ret = of_parse_phandle_with_fixed_args(dn, "mediatek,syscon-type",
|
|
|
|
2, 0, &args);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
instance->type_sw_reg = args.args[0];
|
|
|
|
instance->type_sw_index = args.args[1] & 0x3; /* <=3 */
|
|
|
|
instance->type_sw = syscon_node_to_regmap(args.np);
|
|
|
|
of_node_put(args.np);
|
|
|
|
dev_info(&instance->phy->dev, "type_sw - reg %#x, index %d\n",
|
|
|
|
instance->type_sw_reg, instance->type_sw_index);
|
|
|
|
|
|
|
|
return PTR_ERR_OR_ZERO(instance->type_sw);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int phy_type_set(struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
int type;
|
|
|
|
u32 offset;
|
|
|
|
|
|
|
|
if (!instance->type_sw)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
switch (instance->type) {
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
type = RG_PHY_SW_USB3;
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
type = RG_PHY_SW_PCIE;
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SGMII:
|
|
|
|
type = RG_PHY_SW_SGMII;
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SATA:
|
|
|
|
type = RG_PHY_SW_SATA;
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_USB2:
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
offset = instance->type_sw_index * BITS_PER_BYTE;
|
|
|
|
regmap_update_bits(instance->type_sw, instance->type_sw_reg,
|
|
|
|
RG_PHY_SW_TYPE << offset, type << offset);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct device *dev = &instance->phy->dev;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
/* tphy v1 doesn't support sw efuse, skip it */
|
|
|
|
if (!tphy->pdata->sw_efuse_supported) {
|
|
|
|
instance->efuse_sw_en = 0;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* software efuse is optional */
|
|
|
|
instance->efuse_sw_en = device_property_read_bool(dev, "nvmem-cells");
|
|
|
|
if (!instance->efuse_sw_en)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
switch (instance->type) {
|
|
|
|
case PHY_TYPE_USB2:
|
|
|
|
ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "fail to get u2 intr efuse, %d\n", ret);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* no efuse, ignore it */
|
|
|
|
if (!instance->efuse_intr) {
|
|
|
|
dev_warn(dev, "no u2 intr efuse, but dts enable it\n");
|
|
|
|
instance->efuse_sw_en = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(dev, "u2 efuse - intr %x\n", instance->efuse_intr);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "fail to get u3 intr efuse, %d\n", ret);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = nvmem_cell_read_variable_le_u32(dev, "rx_imp", &instance->efuse_rx_imp);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "fail to get u3 rx_imp efuse, %d\n", ret);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = nvmem_cell_read_variable_le_u32(dev, "tx_imp", &instance->efuse_tx_imp);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "fail to get u3 tx_imp efuse, %d\n", ret);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* no efuse, ignore it */
|
|
|
|
if (!instance->efuse_intr &&
|
|
|
|
!instance->efuse_rx_imp &&
|
|
|
|
!instance->efuse_tx_imp) {
|
|
|
|
dev_warn(dev, "no u3 intr efuse, but dts enable it\n");
|
|
|
|
instance->efuse_sw_en = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(dev, "u3 efuse - intr %x, rx_imp %x, tx_imp %x\n",
|
|
|
|
instance->efuse_intr, instance->efuse_rx_imp,instance->efuse_tx_imp);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "no sw efuse for type %d\n", instance->type);
|
|
|
|
ret = -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void phy_efuse_set(struct mtk_phy_instance *instance)
|
|
|
|
{
|
|
|
|
struct device *dev = &instance->phy->dev;
|
|
|
|
struct u2phy_banks *u2_banks = &instance->u2_banks;
|
|
|
|
struct u3phy_banks *u3_banks = &instance->u3_banks;
|
|
|
|
|
|
|
|
if (!instance->efuse_sw_en)
|
|
|
|
return;
|
|
|
|
|
|
|
|
switch (instance->type) {
|
|
|
|
case PHY_TYPE_USB2:
|
|
|
|
mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1, MR1_EFUSE_AUTO_LOAD_DIS);
|
|
|
|
|
|
|
|
mtk_phy_update_field(u2_banks->com + U3P_USBPHYACR1, PA1_RG_INTR_CAL,
|
|
|
|
instance->efuse_intr);
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_RSV, P3D_RG_EFUSE_AUTO_LOAD_DIS);
|
|
|
|
|
|
|
|
mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL,
|
|
|
|
instance->efuse_tx_imp);
|
|
|
|
mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
|
|
|
|
|
|
|
|
mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL,
|
|
|
|
instance->efuse_rx_imp);
|
|
|
|
mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
|
|
|
|
|
|
|
|
mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR,
|
|
|
|
instance->efuse_intr);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_warn(dev, "no sw efuse for type %d\n", instance->type);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mtk_phy_init(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
|
|
|
|
struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = clk_bulk_prepare_enable(TPHY_CLKS_CNT, instance->clks);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
phy_efuse_set(instance);
|
|
|
|
|
|
|
|
switch (instance->type) {
|
|
|
|
case PHY_TYPE_USB2:
|
|
|
|
u2_phy_instance_init(tphy, instance);
|
|
|
|
u2_phy_props_set(tphy, instance);
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_USB3:
|
|
|
|
u3_phy_instance_init(tphy, instance);
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_PCIE:
|
|
|
|
pcie_phy_instance_init(tphy, instance);
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SATA:
|
|
|
|
sata_phy_instance_init(tphy, instance);
|
|
|
|
break;
|
|
|
|
case PHY_TYPE_SGMII:
|
|
|
|
/* nothing to do, only used to set type */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(tphy->dev, "incompatible PHY type\n");
|
|
|
|
clk_bulk_disable_unprepare(TPHY_CLKS_CNT, instance->clks);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mtk_phy_power_on(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
|
|
|
|
struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
|
|
|
|
|
|
|
|
if (instance->type == PHY_TYPE_USB2) {
|
|
|
|
u2_phy_instance_power_on(tphy, instance);
|
|
|
|
hs_slew_rate_calibrate(tphy, instance);
|
|
|
|
} else if (instance->type == PHY_TYPE_PCIE) {
|
|
|
|
pcie_phy_instance_power_on(tphy, instance);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mtk_phy_power_off(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
|
|
|
|
struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
|
|
|
|
|
|
|
|
if (instance->type == PHY_TYPE_USB2)
|
|
|
|
u2_phy_instance_power_off(tphy, instance);
|
|
|
|
else if (instance->type == PHY_TYPE_PCIE)
|
|
|
|
pcie_phy_instance_power_off(tphy, instance);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mtk_phy_exit(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
|
|
|
|
struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
|
|
|
|
|
|
|
|
if (instance->type == PHY_TYPE_USB2)
|
|
|
|
u2_phy_instance_exit(tphy, instance);
|
|
|
|
|
|
|
|
clk_bulk_disable_unprepare(TPHY_CLKS_CNT, instance->clks);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
|
|
|
|
{
|
|
|
|
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
|
|
|
|
struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
|
|
|
|
|
|
|
|
if (instance->type == PHY_TYPE_USB2)
|
|
|
|
u2_phy_instance_set_mode(tphy, instance, mode);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct phy *mtk_phy_xlate(struct device *dev,
|
|
|
|
struct of_phandle_args *args)
|
|
|
|
{
|
|
|
|
struct mtk_tphy *tphy = dev_get_drvdata(dev);
|
|
|
|
struct mtk_phy_instance *instance = NULL;
|
|
|
|
struct device_node *phy_np = args->np;
|
|
|
|
int index;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (args->args_count != 1) {
|
|
|
|
dev_err(dev, "invalid number of cells in 'phy' property\n");
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (index = 0; index < tphy->nphys; index++)
|
|
|
|
if (phy_np == tphy->phys[index]->phy->dev.of_node) {
|
|
|
|
instance = tphy->phys[index];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!instance) {
|
|
|
|
dev_err(dev, "failed to find appropriate phy\n");
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
instance->type = args->args[0];
|
|
|
|
if (!(instance->type == PHY_TYPE_USB2 ||
|
|
|
|
instance->type == PHY_TYPE_USB3 ||
|
|
|
|
instance->type == PHY_TYPE_PCIE ||
|
|
|
|
instance->type == PHY_TYPE_SATA ||
|
|
|
|
instance->type == PHY_TYPE_SGMII)) {
|
|
|
|
dev_err(dev, "unsupported device type: %d\n", instance->type);
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (tphy->pdata->version) {
|
|
|
|
case MTK_PHY_V1:
|
|
|
|
phy_v1_banks_init(tphy, instance);
|
|
|
|
break;
|
|
|
|
case MTK_PHY_V2:
|
|
|
|
case MTK_PHY_V3:
|
|
|
|
phy_v2_banks_init(tphy, instance);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "phy version is not supported\n");
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = phy_efuse_get(tphy, instance);
|
|
|
|
if (ret)
|
|
|
|
return ERR_PTR(ret);
|
|
|
|
|
|
|
|
phy_parse_property(tphy, instance);
|
|
|
|
phy_type_set(instance);
|
2023-10-24 12:59:35 +02:00
|
|
|
phy_debugfs_init(instance);
|
2023-08-30 17:31:07 +02:00
|
|
|
|
|
|
|
return instance->phy;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct phy_ops mtk_tphy_ops = {
|
|
|
|
.init = mtk_phy_init,
|
|
|
|
.exit = mtk_phy_exit,
|
|
|
|
.power_on = mtk_phy_power_on,
|
|
|
|
.power_off = mtk_phy_power_off,
|
|
|
|
.set_mode = mtk_phy_set_mode,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct mtk_phy_pdata tphy_v1_pdata = {
|
|
|
|
.avoid_rx_sen_degradation = false,
|
|
|
|
.version = MTK_PHY_V1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct mtk_phy_pdata tphy_v2_pdata = {
|
|
|
|
.avoid_rx_sen_degradation = false,
|
|
|
|
.sw_efuse_supported = true,
|
|
|
|
.version = MTK_PHY_V2,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct mtk_phy_pdata tphy_v3_pdata = {
|
|
|
|
.sw_efuse_supported = true,
|
|
|
|
.version = MTK_PHY_V3,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct mtk_phy_pdata mt8173_pdata = {
|
|
|
|
.avoid_rx_sen_degradation = true,
|
|
|
|
.version = MTK_PHY_V1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct mtk_phy_pdata mt8195_pdata = {
|
|
|
|
.sw_pll_48m_to_26m = true,
|
|
|
|
.sw_efuse_supported = true,
|
|
|
|
.version = MTK_PHY_V3,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct of_device_id mtk_tphy_id_table[] = {
|
|
|
|
{ .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
|
|
|
|
{ .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
|
|
|
|
{ .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
|
|
|
|
{ .compatible = "mediatek,mt8195-tphy", .data = &mt8195_pdata },
|
|
|
|
{ .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
|
|
|
|
{ .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
|
|
|
|
{ .compatible = "mediatek,generic-tphy-v3", .data = &tphy_v3_pdata },
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mtk_tphy_id_table);
|
|
|
|
|
|
|
|
static int mtk_tphy_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
struct device_node *np = dev->of_node;
|
|
|
|
struct device_node *child_np;
|
|
|
|
struct phy_provider *provider;
|
|
|
|
struct resource *sif_res;
|
|
|
|
struct mtk_tphy *tphy;
|
|
|
|
struct resource res;
|
|
|
|
int port, retval;
|
|
|
|
|
|
|
|
tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL);
|
|
|
|
if (!tphy)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
tphy->pdata = of_device_get_match_data(dev);
|
|
|
|
if (!tphy->pdata)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
tphy->nphys = of_get_child_count(np);
|
|
|
|
tphy->phys = devm_kcalloc(dev, tphy->nphys,
|
|
|
|
sizeof(*tphy->phys), GFP_KERNEL);
|
|
|
|
if (!tphy->phys)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
tphy->dev = dev;
|
|
|
|
platform_set_drvdata(pdev, tphy);
|
|
|
|
|
|
|
|
sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
/* SATA phy of V1 needn't it if not shared with PCIe or USB */
|
|
|
|
if (sif_res && tphy->pdata->version == MTK_PHY_V1) {
|
|
|
|
/* get banks shared by multiple phys */
|
|
|
|
tphy->sif_base = devm_ioremap_resource(dev, sif_res);
|
|
|
|
if (IS_ERR(tphy->sif_base)) {
|
|
|
|
dev_err(dev, "failed to remap sif regs\n");
|
|
|
|
return PTR_ERR(tphy->sif_base);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tphy->pdata->version < MTK_PHY_V3) {
|
|
|
|
tphy->src_ref_clk = U3P_REF_CLK;
|
|
|
|
tphy->src_coef = U3P_SLEW_RATE_COEF;
|
|
|
|
/* update parameters of slew rate calibrate if exist */
|
|
|
|
device_property_read_u32(dev, "mediatek,src-ref-clk-mhz",
|
|
|
|
&tphy->src_ref_clk);
|
|
|
|
device_property_read_u32(dev, "mediatek,src-coef",
|
|
|
|
&tphy->src_coef);
|
|
|
|
}
|
|
|
|
|
|
|
|
port = 0;
|
|
|
|
for_each_child_of_node(np, child_np) {
|
|
|
|
struct mtk_phy_instance *instance;
|
|
|
|
struct clk_bulk_data *clks;
|
|
|
|
struct device *subdev;
|
|
|
|
struct phy *phy;
|
|
|
|
|
|
|
|
instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
|
|
|
|
if (!instance) {
|
|
|
|
retval = -ENOMEM;
|
|
|
|
goto put_child;
|
|
|
|
}
|
|
|
|
|
|
|
|
tphy->phys[port] = instance;
|
|
|
|
|
|
|
|
phy = devm_phy_create(dev, child_np, &mtk_tphy_ops);
|
|
|
|
if (IS_ERR(phy)) {
|
|
|
|
dev_err(dev, "failed to create phy\n");
|
|
|
|
retval = PTR_ERR(phy);
|
|
|
|
goto put_child;
|
|
|
|
}
|
|
|
|
|
|
|
|
subdev = &phy->dev;
|
|
|
|
retval = of_address_to_resource(child_np, 0, &res);
|
|
|
|
if (retval) {
|
|
|
|
dev_err(subdev, "failed to get address resource(id-%d)\n",
|
|
|
|
port);
|
|
|
|
goto put_child;
|
|
|
|
}
|
|
|
|
|
|
|
|
instance->port_base = devm_ioremap_resource(subdev, &res);
|
|
|
|
if (IS_ERR(instance->port_base)) {
|
|
|
|
retval = PTR_ERR(instance->port_base);
|
|
|
|
goto put_child;
|
|
|
|
}
|
|
|
|
|
|
|
|
instance->phy = phy;
|
|
|
|
instance->index = port;
|
|
|
|
phy_set_drvdata(phy, instance);
|
|
|
|
port++;
|
|
|
|
|
|
|
|
clks = instance->clks;
|
|
|
|
clks[0].id = "ref"; /* digital (& analog) clock */
|
|
|
|
clks[1].id = "da_ref"; /* analog clock */
|
|
|
|
retval = devm_clk_bulk_get_optional(subdev, TPHY_CLKS_CNT, clks);
|
|
|
|
if (retval)
|
|
|
|
goto put_child;
|
|
|
|
|
|
|
|
retval = phy_type_syscon_get(instance, child_np);
|
|
|
|
if (retval)
|
|
|
|
goto put_child;
|
|
|
|
}
|
|
|
|
|
|
|
|
provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
|
|
|
|
|
|
|
|
return PTR_ERR_OR_ZERO(provider);
|
|
|
|
put_child:
|
|
|
|
of_node_put(child_np);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver mtk_tphy_driver = {
|
|
|
|
.probe = mtk_tphy_probe,
|
|
|
|
.driver = {
|
|
|
|
.name = "mtk-tphy",
|
|
|
|
.of_match_table = mtk_tphy_id_table,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(mtk_tphy_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
|
|
|
|
MODULE_DESCRIPTION("MediaTek T-PHY driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|