linux-zen-desktop/drivers/pinctrl/aspeed/pinctrl-aspeed.h

120 lines
3.6 KiB
C
Raw Normal View History

2023-08-30 17:31:07 +02:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2016 IBM Corp.
*/
#ifndef PINCTRL_ASPEED
#define PINCTRL_ASPEED
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/regmap.h>
#include "pinmux-aspeed.h"
/**
* @param The pinconf parameter type
* @pins The pin range this config struct covers, [low, high]
* @reg The register housing the configuration bits
* @mask The mask to select the bits of interest in @reg
*/
struct aspeed_pin_config {
enum pin_config_param param;
unsigned int pins[2];
unsigned int reg;
u32 mask;
};
#define ASPEED_PINCTRL_PIN(name_) \
[name_] = { \
.number = name_, \
.name = #name_, \
.drv_data = (void *) &(PIN_SYM(name_)) \
}
#define ASPEED_SB_PINCONF(param_, pin0_, pin1_, reg_, bit_) { \
.param = param_, \
.pins = {pin0_, pin1_}, \
.reg = reg_, \
.mask = BIT_MASK(bit_) \
}
#define ASPEED_PULL_DOWN_PINCONF(pin_, reg_, bit_) \
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_PULL_DOWN, pin_, pin_, reg_, bit_), \
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_DISABLE, pin_, pin_, reg_, bit_)
#define ASPEED_PULL_UP_PINCONF(pin_, reg_, bit_) \
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_PULL_UP, pin_, pin_, reg_, bit_), \
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_DISABLE, pin_, pin_, reg_, bit_)
/*
* Aspeed pin configuration description.
*
* @param: pinconf configuration parameter
* @arg: The supported argument for @param, or -1 if any value is supported
* @val: The register value to write to configure @arg for @param
* @mask: The bitfield mask for @val
*
* The map is to be used in conjunction with the configuration array supplied
* by the driver implementation.
*/
struct aspeed_pin_config_map {
enum pin_config_param param;
s32 arg;
u32 val;
u32 mask;
};
struct aspeed_pinctrl_data {
struct regmap *scu;
const struct pinctrl_pin_desc *pins;
const unsigned int npins;
const struct aspeed_pin_config *configs;
const unsigned int nconfigs;
struct aspeed_pinmux_data pinmux;
const struct aspeed_pin_config_map *confmaps;
const unsigned int nconfmaps;
};
/* Aspeed pinctrl helpers */
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev);
const char *aspeed_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group);
int aspeed_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
unsigned int group, const unsigned int **pins,
unsigned int *npins);
void aspeed_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned int offset);
int aspeed_pinmux_get_fn_count(struct pinctrl_dev *pctldev);
const char *aspeed_pinmux_get_fn_name(struct pinctrl_dev *pctldev,
unsigned int function);
int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
unsigned int function, const char * const **groups,
unsigned int * const num_groups);
int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
unsigned int group);
int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset);
int aspeed_pinctrl_probe(struct platform_device *pdev,
struct pinctrl_desc *pdesc,
struct aspeed_pinctrl_data *pdata);
int aspeed_pin_config_get(struct pinctrl_dev *pctldev, unsigned int offset,
unsigned long *config);
int aspeed_pin_config_set(struct pinctrl_dev *pctldev, unsigned int offset,
unsigned long *configs, unsigned int num_configs);
int aspeed_pin_config_group_get(struct pinctrl_dev *pctldev,
unsigned int selector,
unsigned long *config);
int aspeed_pin_config_group_set(struct pinctrl_dev *pctldev,
unsigned int selector,
unsigned long *configs,
unsigned int num_configs);
#endif /* PINCTRL_ASPEED */