kvj
/
linux-zen-desktop
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-desktop/drivers/usb/serial/xr_serial.c

1025 lines
24 KiB
C
Raw Normal View History

Initial commit
2023-08-30 17:31:07 +02:00
// SPDX-License-Identifier: GPL-2.0+
/*
* MaxLinear/Exar USB to Serial driver
*
* Copyright (c) 2020 Manivannan Sadhasivam <mani@kernel.org>
* Copyright (c) 2021 Johan Hovold <johan@kernel.org>
*
* Based on the initial driver written by Patong Yang:
*
* https://lore.kernel.org/r/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop
*
* Copyright (c) 2018 Patong Yang <patong.mxl@gmail.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/serial.h>
struct xr_txrx_clk_mask {
u16 tx;
u16 rx0;
u16 rx1;
};
#define XR_INT_OSC_HZ 48000000U
#define XR21V141X_MIN_SPEED 46U
#define XR21V141X_MAX_SPEED XR_INT_OSC_HZ
/* XR21V141X register blocks */
#define XR21V141X_UART_REG_BLOCK 0
#define XR21V141X_UM_REG_BLOCK 4
#define XR21V141X_UART_CUSTOM_BLOCK 0x66
/* XR21V141X UART registers */
#define XR21V141X_CLOCK_DIVISOR_0 0x04
#define XR21V141X_CLOCK_DIVISOR_1 0x05
#define XR21V141X_CLOCK_DIVISOR_2 0x06
#define XR21V141X_TX_CLOCK_MASK_0 0x07
#define XR21V141X_TX_CLOCK_MASK_1 0x08
#define XR21V141X_RX_CLOCK_MASK_0 0x09
#define XR21V141X_RX_CLOCK_MASK_1 0x0a
#define XR21V141X_REG_FORMAT 0x0b
/* XR21V141X UART Manager registers */
#define XR21V141X_UM_FIFO_ENABLE_REG 0x10
#define XR21V141X_UM_ENABLE_TX_FIFO 0x01
#define XR21V141X_UM_ENABLE_RX_FIFO 0x02
#define XR21V141X_UM_RX_FIFO_RESET 0x18
#define XR21V141X_UM_TX_FIFO_RESET 0x1c
#define XR_UART_ENABLE_TX 0x1
#define XR_UART_ENABLE_RX 0x2
#define XR_GPIO_RI BIT(0)
#define XR_GPIO_CD BIT(1)
#define XR_GPIO_DSR BIT(2)
#define XR_GPIO_DTR BIT(3)
#define XR_GPIO_CTS BIT(4)
#define XR_GPIO_RTS BIT(5)
#define XR_GPIO_CLK BIT(6)
#define XR_GPIO_XEN BIT(7)
#define XR_GPIO_TXT BIT(8)
#define XR_GPIO_RXT BIT(9)
#define XR_UART_DATA_MASK GENMASK(3, 0)
#define XR_UART_DATA_7 0x7
#define XR_UART_DATA_8 0x8
#define XR_UART_PARITY_MASK GENMASK(6, 4)
#define XR_UART_PARITY_SHIFT 4
#define XR_UART_PARITY_NONE (0x0 << XR_UART_PARITY_SHIFT)
#define XR_UART_PARITY_ODD (0x1 << XR_UART_PARITY_SHIFT)
#define XR_UART_PARITY_EVEN (0x2 << XR_UART_PARITY_SHIFT)
#define XR_UART_PARITY_MARK (0x3 << XR_UART_PARITY_SHIFT)
#define XR_UART_PARITY_SPACE (0x4 << XR_UART_PARITY_SHIFT)
#define XR_UART_STOP_MASK BIT(7)
#define XR_UART_STOP_SHIFT 7
#define XR_UART_STOP_1 (0x0 << XR_UART_STOP_SHIFT)
#define XR_UART_STOP_2 (0x1 << XR_UART_STOP_SHIFT)
#define XR_UART_FLOW_MODE_NONE 0x0
#define XR_UART_FLOW_MODE_HW 0x1
#define XR_UART_FLOW_MODE_SW 0x2
#define XR_GPIO_MODE_SEL_MASK GENMASK(2, 0)
#define XR_GPIO_MODE_SEL_RTS_CTS 0x1
#define XR_GPIO_MODE_SEL_DTR_DSR 0x2
#define XR_GPIO_MODE_SEL_RS485 0x3
#define XR_GPIO_MODE_SEL_RS485_ADDR 0x4
#define XR_GPIO_MODE_TX_TOGGLE 0x100
#define XR_GPIO_MODE_RX_TOGGLE 0x200
#define XR_FIFO_RESET 0x1
#define XR_CUSTOM_DRIVER_ACTIVE 0x1
static int xr21v141x_uart_enable(struct usb_serial_port *port);
static int xr21v141x_uart_disable(struct usb_serial_port *port);
static int xr21v141x_fifo_reset(struct usb_serial_port *port);
static void xr21v141x_set_line_settings(struct tty_struct *tty,
struct usb_serial_port *port,
const struct ktermios *old_termios);
struct xr_type {
int reg_width;
u8 reg_recipient;
u8 set_reg;
u8 get_reg;
u16 uart_enable;
u16 flow_control;
u16 xon_char;
u16 xoff_char;
u16 tx_break;
u16 gpio_mode;
u16 gpio_direction;
u16 gpio_set;
u16 gpio_clear;
u16 gpio_status;
u16 tx_fifo_reset;
u16 rx_fifo_reset;
u16 custom_driver;
bool have_5_6_bit_mode;
bool have_xmit_toggle;
int (*enable)(struct usb_serial_port *port);
int (*disable)(struct usb_serial_port *port);
int (*fifo_reset)(struct usb_serial_port *port);
void (*set_line_settings)(struct tty_struct *tty,
struct usb_serial_port *port,
const struct ktermios *old_termios);
};
enum xr_type_id {
XR21V141X,
XR21B142X,
XR21B1411,
XR2280X,
XR_TYPE_COUNT,
};
static const struct xr_type xr_types[] = {
[XR21V141X] = {
.reg_width = 8,
.reg_recipient = USB_RECIP_DEVICE,
.set_reg = 0x00,
.get_reg = 0x01,
.uart_enable = 0x03,
.flow_control = 0x0c,
.xon_char = 0x10,
.xoff_char = 0x11,
.tx_break = 0x14,
.gpio_mode = 0x1a,
.gpio_direction = 0x1b,
.gpio_set = 0x1d,
.gpio_clear = 0x1e,
.gpio_status = 0x1f,
.enable = xr21v141x_uart_enable,
.disable = xr21v141x_uart_disable,
.fifo_reset = xr21v141x_fifo_reset,
.set_line_settings = xr21v141x_set_line_settings,
},
[XR21B142X] = {
.reg_width = 16,
.reg_recipient = USB_RECIP_INTERFACE,
.set_reg = 0x00,
.get_reg = 0x00,
.uart_enable = 0x00,
.flow_control = 0x06,
.xon_char = 0x07,
.xoff_char = 0x08,
.tx_break = 0x0a,
.gpio_mode = 0x0c,
.gpio_direction = 0x0d,
.gpio_set = 0x0e,
.gpio_clear = 0x0f,
.gpio_status = 0x10,
.tx_fifo_reset = 0x40,
.rx_fifo_reset = 0x43,
.custom_driver = 0x60,
.have_5_6_bit_mode = true,
.have_xmit_toggle = true,
},
[XR21B1411] = {
.reg_width = 12,
.reg_recipient = USB_RECIP_DEVICE,
.set_reg = 0x00,
.get_reg = 0x01,
.uart_enable = 0xc00,
.flow_control = 0xc06,
.xon_char = 0xc07,
.xoff_char = 0xc08,
.tx_break = 0xc0a,
.gpio_mode = 0xc0c,
.gpio_direction = 0xc0d,
.gpio_set = 0xc0e,
.gpio_clear = 0xc0f,
.gpio_status = 0xc10,
.tx_fifo_reset = 0xc80,
.rx_fifo_reset = 0xcc0,
.custom_driver = 0x20d,
},
[XR2280X] = {
.reg_width = 16,
.reg_recipient = USB_RECIP_DEVICE,
.set_reg = 0x05,
.get_reg = 0x05,
.uart_enable = 0x40,
.flow_control = 0x46,
.xon_char = 0x47,
.xoff_char = 0x48,
.tx_break = 0x4a,
.gpio_mode = 0x4c,
.gpio_direction = 0x4d,
.gpio_set = 0x4e,
.gpio_clear = 0x4f,
.gpio_status = 0x50,
.tx_fifo_reset = 0x60,
.rx_fifo_reset = 0x63,
.custom_driver = 0x81,
},
};
struct xr_data {
const struct xr_type *type;
u8 channel; /* zero-based index or interface number */
};
static int xr_set_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 val)
{
struct xr_data *data = usb_get_serial_port_data(port);
const struct xr_type *type = data->type;
struct usb_serial *serial = port->serial;
int ret;
ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
type->set_reg,
USB_DIR_OUT | USB_TYPE_VENDOR | type->reg_recipient,
val, (channel << 8) | reg, NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (ret < 0) {
dev_err(&port->dev, "Failed to set reg 0x%02x: %d\n", reg, ret);
return ret;
}
return 0;
}
static int xr_get_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 *val)
{
struct xr_data *data = usb_get_serial_port_data(port);
const struct xr_type *type = data->type;
struct usb_serial *serial = port->serial;
u8 *dmabuf;
int ret, len;
if (type->reg_width == 8)
len = 1;
else
len = 2;
dmabuf = kmalloc(len, GFP_KERNEL);
if (!dmabuf)
return -ENOMEM;
ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
type->get_reg,
USB_DIR_IN | USB_TYPE_VENDOR | type->reg_recipient,
0, (channel << 8) | reg, dmabuf, len,
USB_CTRL_GET_TIMEOUT);
if (ret == len) {
if (len == 2)
*val = le16_to_cpup((__le16 *)dmabuf);
else
*val = *dmabuf;
ret = 0;
} else {
dev_err(&port->dev, "Failed to get reg 0x%02x: %d\n", reg, ret);
if (ret >= 0)
ret = -EIO;
}
kfree(dmabuf);
return ret;
}
static int xr_set_reg_uart(struct usb_serial_port *port, u16 reg, u16 val)
{
struct xr_data *data = usb_get_serial_port_data(port);
return xr_set_reg(port, data->channel, reg, val);
}
static int xr_get_reg_uart(struct usb_serial_port *port, u16 reg, u16 *val)
{
struct xr_data *data = usb_get_serial_port_data(port);
return xr_get_reg(port, data->channel, reg, val);
}
static int xr_set_reg_um(struct usb_serial_port *port, u8 reg_base, u8 val)
{
struct xr_data *data = usb_get_serial_port_data(port);
u8 reg;
reg = reg_base + data->channel;
return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val);
}
static int __xr_uart_enable(struct usb_serial_port *port)
{
struct xr_data *data = usb_get_serial_port_data(port);
return xr_set_reg_uart(port, data->type->uart_enable,
XR_UART_ENABLE_TX | XR_UART_ENABLE_RX);
}
static int __xr_uart_disable(struct usb_serial_port *port)
{
struct xr_data *data = usb_get_serial_port_data(port);
return xr_set_reg_uart(port, data->type->uart_enable, 0);
}
/*
* According to datasheet, below is the recommended sequence for enabling UART
* module in XR21V141X:
*
* Enable Tx FIFO
* Enable Tx and Rx
* Enable Rx FIFO
*/
static int xr21v141x_uart_enable(struct usb_serial_port *port)
{
int ret;
ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG,
XR21V141X_UM_ENABLE_TX_FIFO);
if (ret)
return ret;
ret = __xr_uart_enable(port);
if (ret)
return ret;
ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG,
XR21V141X_UM_ENABLE_TX_FIFO | XR21V141X_UM_ENABLE_RX_FIFO);
if (ret)
__xr_uart_disable(port);
return ret;
}
static int xr21v141x_uart_disable(struct usb_serial_port *port)
{
int ret;
ret = __xr_uart_disable(port);
if (ret)
return ret;
ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, 0);
return ret;
}
static int xr_uart_enable(struct usb_serial_port *port)
{
struct xr_data *data = usb_get_serial_port_data(port);
if (data->type->enable)
return data->type->enable(port);
return __xr_uart_enable(port);
}
static int xr_uart_disable(struct usb_serial_port *port)
{
struct xr_data *data = usb_get_serial_port_data(port);
if (data->type->disable)
return data->type->disable(port);
return __xr_uart_disable(port);
}
static int xr21v141x_fifo_reset(struct usb_serial_port *port)
{
int ret;
ret = xr_set_reg_um(port, XR21V141X_UM_TX_FIFO_RESET, XR_FIFO_RESET);
if (ret)
return ret;
ret = xr_set_reg_um(port, XR21V141X_UM_RX_FIFO_RESET, XR_FIFO_RESET);
if (ret)
return ret;
return 0;
}
static int xr_fifo_reset(struct usb_serial_port *port)
{
struct xr_data *data = usb_get_serial_port_data(port);
int ret;
if (data->type->fifo_reset)
return data->type->fifo_reset(port);
ret = xr_set_reg_uart(port, data->type->tx_fifo_reset, XR_FIFO_RESET);
if (ret)
return ret;
ret = xr_set_reg_uart(port, data->type->rx_fifo_reset, XR_FIFO_RESET);
if (ret)
return ret;
return 0;
}
static int xr_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct xr_data *data = usb_get_serial_port_data(port);
u16 status;
int ret;
ret = xr_get_reg_uart(port, data->type->gpio_status, &status);
if (ret)
return ret;
/*
* Modem control pins are active low, so reading '0' means it is active
* and '1' means not active.
*/
ret = ((status & XR_GPIO_DTR) ? 0 : TIOCM_DTR) |
((status & XR_GPIO_RTS) ? 0 : TIOCM_RTS) |
((status & XR_GPIO_CTS) ? 0 : TIOCM_CTS) |
((status & XR_GPIO_DSR) ? 0 : TIOCM_DSR) |
((status & XR_GPIO_RI) ? 0 : TIOCM_RI) |
((status & XR_GPIO_CD) ? 0 : TIOCM_CD);
return ret;
}
static int xr_tiocmset_port(struct usb_serial_port *port,
unsigned int set, unsigned int clear)
{
struct xr_data *data = usb_get_serial_port_data(port);
const struct xr_type *type = data->type;
u16 gpio_set = 0;
u16 gpio_clr = 0;
int ret = 0;
/* Modem control pins are active low, so set & clr are swapped */
if (set & TIOCM_RTS)
gpio_clr |= XR_GPIO_RTS;
if (set & TIOCM_DTR)
gpio_clr |= XR_GPIO_DTR;
if (clear & TIOCM_RTS)
gpio_set |= XR_GPIO_RTS;
if (clear & TIOCM_DTR)
gpio_set |= XR_GPIO_DTR;
/* Writing '0' to gpio_{set/clr} bits has no effect, so no need to do */
if (gpio_clr)
ret = xr_set_reg_uart(port, type->gpio_clear, gpio_clr);
if (gpio_set)
ret = xr_set_reg_uart(port, type->gpio_set, gpio_set);
return ret;
}
static int xr_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
return xr_tiocmset_port(port, set, clear);
}
static void xr_dtr_rts(struct usb_serial_port *port, int on)
{
if (on)
xr_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0);
else
xr_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS);
}
6.5.5
2023-10-24 12:59:35 +02:00
static int xr_break_ctl(struct tty_struct *tty, int break_state)
Initial commit
2023-08-30 17:31:07 +02:00
{
struct usb_serial_port *port = tty->driver_data;
struct xr_data *data = usb_get_serial_port_data(port);
const struct xr_type *type = data->type;
u16 state;
if (break_state == 0)
state = 0;
else
state = GENMASK(type->reg_width - 1, 0);
dev_dbg(&port->dev, "Turning break %s\n", state == 0 ? "off" : "on");
6.5.5
2023-10-24 12:59:35 +02:00
return xr_set_reg_uart(port, type->tx_break, state);
Initial commit
2023-08-30 17:31:07 +02:00
}
/* Tx and Rx clock mask values obtained from section 3.3.4 of datasheet */
static const struct xr_txrx_clk_mask xr21v141x_txrx_clk_masks[] = {
{ 0x000, 0x000, 0x000 },
{ 0x000, 0x000, 0x000 },
{ 0x100, 0x000, 0x100 },
{ 0x020, 0x400, 0x020 },
{ 0x010, 0x100, 0x010 },
{ 0x208, 0x040, 0x208 },
{ 0x104, 0x820, 0x108 },
{ 0x844, 0x210, 0x884 },
{ 0x444, 0x110, 0x444 },
{ 0x122, 0x888, 0x224 },
{ 0x912, 0x448, 0x924 },
{ 0x492, 0x248, 0x492 },
{ 0x252, 0x928, 0x292 },
{ 0x94a, 0x4a4, 0xa52 },
{ 0x52a, 0xaa4, 0x54a },
{ 0xaaa, 0x954, 0x4aa },
{ 0xaaa, 0x554, 0xaaa },
{ 0x555, 0xad4, 0x5aa },
{ 0xb55, 0xab4, 0x55a },
{ 0x6b5, 0x5ac, 0xb56 },
{ 0x5b5, 0xd6c, 0x6d6 },
{ 0xb6d, 0xb6a, 0xdb6 },
{ 0x76d, 0x6da, 0xbb6 },
{ 0xedd, 0xdda, 0x76e },
{ 0xddd, 0xbba, 0xeee },
{ 0x7bb, 0xf7a, 0xdde },
{ 0xf7b, 0xef6, 0x7de },
{ 0xdf7, 0xbf6, 0xf7e },
{ 0x7f7, 0xfee, 0xefe },
{ 0xfdf, 0xfbe, 0x7fe },
{ 0xf7f, 0xefe, 0xffe },
{ 0xfff, 0xffe, 0xffd },
};
static int xr21v141x_set_baudrate(struct tty_struct *tty, struct usb_serial_port *port)
{
u32 divisor, baud, idx;
u16 tx_mask, rx_mask;
int ret;
baud = tty->termios.c_ospeed;
if (!baud)
return 0;
baud = clamp(baud, XR21V141X_MIN_SPEED, XR21V141X_MAX_SPEED);
divisor = XR_INT_OSC_HZ / baud;
idx = ((32 * XR_INT_OSC_HZ) / baud) & 0x1f;
tx_mask = xr21v141x_txrx_clk_masks[idx].tx;
if (divisor & 0x01)
rx_mask = xr21v141x_txrx_clk_masks[idx].rx1;
else
rx_mask = xr21v141x_txrx_clk_masks[idx].rx0;
dev_dbg(&port->dev, "Setting baud rate: %u\n", baud);
/*
* XR21V141X uses fractional baud rate generator with 48MHz internal
* oscillator and 19-bit programmable divisor. So theoretically it can
* generate most commonly used baud rates with high accuracy.
*/
ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_0,
divisor & 0xff);
if (ret)
return ret;
ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_1,
(divisor >> 8) & 0xff);
if (ret)
return ret;
ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_2,
(divisor >> 16) & 0xff);
if (ret)
return ret;
ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_0,
tx_mask & 0xff);
if (ret)
return ret;
ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_1,
(tx_mask >> 8) & 0xff);
if (ret)
return ret;
ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_0,
rx_mask & 0xff);
if (ret)
return ret;
ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_1,
(rx_mask >> 8) & 0xff);
if (ret)
return ret;
tty_encode_baud_rate(tty, baud, baud);
return 0;
}
static void xr_set_flow_mode(struct tty_struct *tty,
struct usb_serial_port *port,
const struct ktermios *old_termios)
{
struct xr_data *data = usb_get_serial_port_data(port);
const struct xr_type *type = data->type;
u16 flow, gpio_mode;
int ret;
ret = xr_get_reg_uart(port, type->gpio_mode, &gpio_mode);
if (ret)
return;
/*
* According to the datasheets, the UART needs to be disabled while
* writing to the FLOW_CONTROL register (XR21V141X), or any register
* but GPIO_SET, GPIO_CLEAR, TX_BREAK and ERROR_STATUS (XR21B142X).
*/
xr_uart_disable(port);
/* Set GPIO mode for controlling the pins manually by default. */
gpio_mode &= ~XR_GPIO_MODE_SEL_MASK;
if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) {
dev_dbg(&port->dev, "Enabling hardware flow ctrl\n");
gpio_mode |= XR_GPIO_MODE_SEL_RTS_CTS;
flow = XR_UART_FLOW_MODE_HW;
} else if (I_IXON(tty)) {
u8 start_char = START_CHAR(tty);
u8 stop_char = STOP_CHAR(tty);
dev_dbg(&port->dev, "Enabling sw flow ctrl\n");
flow = XR_UART_FLOW_MODE_SW;
xr_set_reg_uart(port, type->xon_char, start_char);
xr_set_reg_uart(port, type->xoff_char, stop_char);
} else {
dev_dbg(&port->dev, "Disabling flow ctrl\n");
flow = XR_UART_FLOW_MODE_NONE;
}
xr_set_reg_uart(port, type->flow_control, flow);
xr_set_reg_uart(port, type->gpio_mode, gpio_mode);
xr_uart_enable(port);
if (C_BAUD(tty) == B0)
xr_dtr_rts(port, 0);
else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
xr_dtr_rts(port, 1);
}
static void xr21v141x_set_line_settings(struct tty_struct *tty,
struct usb_serial_port *port,
const struct ktermios *old_termios)
{
struct ktermios *termios = &tty->termios;
u8 bits = 0;
int ret;
if (!old_termios || (tty->termios.c_ospeed != old_termios->c_ospeed))
xr21v141x_set_baudrate(tty, port);
switch (C_CSIZE(tty)) {
case CS5:
case CS6:
/* CS5 and CS6 are not supported, so just restore old setting */
termios->c_cflag &= ~CSIZE;
if (old_termios)
termios->c_cflag |= old_termios->c_cflag & CSIZE;
else
termios->c_cflag |= CS8;
if (C_CSIZE(tty) == CS7)
bits |= XR_UART_DATA_7;
else
bits |= XR_UART_DATA_8;
break;
case CS7:
bits |= XR_UART_DATA_7;
break;
case CS8:
default:
bits |= XR_UART_DATA_8;
break;
}
if (C_PARENB(tty)) {
if (C_CMSPAR(tty)) {
if (C_PARODD(tty))
bits |= XR_UART_PARITY_MARK;
else
bits |= XR_UART_PARITY_SPACE;
} else {
if (C_PARODD(tty))
bits |= XR_UART_PARITY_ODD;
else
bits |= XR_UART_PARITY_EVEN;
}
}
if (C_CSTOPB(tty))
bits |= XR_UART_STOP_2;
else
bits |= XR_UART_STOP_1;
ret = xr_set_reg_uart(port, XR21V141X_REG_FORMAT, bits);
if (ret)
return;
}
static void xr_cdc_set_line_coding(struct tty_struct *tty,
struct usb_serial_port *port,
const struct ktermios *old_termios)
{
struct xr_data *data = usb_get_serial_port_data(port);
struct usb_host_interface *alt = port->serial->interface->cur_altsetting;
struct usb_device *udev = port->serial->dev;
struct usb_cdc_line_coding *lc;
int ret;
lc = kzalloc(sizeof(*lc), GFP_KERNEL);
if (!lc)
return;
if (tty->termios.c_ospeed)
lc->dwDTERate = cpu_to_le32(tty->termios.c_ospeed);
else
lc->dwDTERate = cpu_to_le32(9600);
if (C_CSTOPB(tty))
lc->bCharFormat = USB_CDC_2_STOP_BITS;
else
lc->bCharFormat = USB_CDC_1_STOP_BITS;
if (C_PARENB(tty)) {
if (C_CMSPAR(tty)) {
if (C_PARODD(tty))
lc->bParityType = USB_CDC_MARK_PARITY;
else
lc->bParityType = USB_CDC_SPACE_PARITY;
} else {
if (C_PARODD(tty))
lc->bParityType = USB_CDC_ODD_PARITY;
else
lc->bParityType = USB_CDC_EVEN_PARITY;
}
} else {
lc->bParityType = USB_CDC_NO_PARITY;
}
if (!data->type->have_5_6_bit_mode &&
(C_CSIZE(tty) == CS5 || C_CSIZE(tty) == CS6)) {
tty->termios.c_cflag &= ~CSIZE;
if (old_termios)
tty->termios.c_cflag |= old_termios->c_cflag & CSIZE;
else
tty->termios.c_cflag |= CS8;
}
switch (C_CSIZE(tty)) {
case CS5:
lc->bDataBits = 5;
break;
case CS6:
lc->bDataBits = 6;
break;
case CS7:
lc->bDataBits = 7;
break;
case CS8:
default:
lc->bDataBits = 8;
break;
}
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_CDC_REQ_SET_LINE_CODING,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
0, alt->desc.bInterfaceNumber,
lc, sizeof(*lc), USB_CTRL_SET_TIMEOUT);
if (ret < 0)
dev_err(&port->dev, "Failed to set line coding: %d\n", ret);
kfree(lc);
}
static void xr_set_termios(struct tty_struct *tty,
struct usb_serial_port *port,
const struct ktermios *old_termios)
{
struct xr_data *data = usb_get_serial_port_data(port);
/*
* XR21V141X does not have a CUSTOM_DRIVER flag and always enters CDC
* mode upon receiving CDC requests.
*/
if (data->type->set_line_settings)
data->type->set_line_settings(tty, port, old_termios);
else
xr_cdc_set_line_coding(tty, port, old_termios);
xr_set_flow_mode(tty, port, old_termios);
}
static int xr_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int ret;
ret = xr_fifo_reset(port);
if (ret)
return ret;
ret = xr_uart_enable(port);
if (ret) {
dev_err(&port->dev, "Failed to enable UART\n");
return ret;
}
/* Setup termios */
if (tty)
xr_set_termios(tty, port, NULL);
ret = usb_serial_generic_open(tty, port);
if (ret) {
xr_uart_disable(port);
return ret;
}
return 0;
}
static void xr_close(struct usb_serial_port *port)
{
usb_serial_generic_close(port);
xr_uart_disable(port);
}
static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
{
struct usb_interface *control = serial->interface;
struct usb_host_interface *alt = control->cur_altsetting;
struct usb_cdc_parsed_header hdrs;
struct usb_cdc_union_desc *desc;
struct usb_interface *data;
int ret;
ret = cdc_parse_cdc_header(&hdrs, control, alt->extra, alt->extralen);
if (ret < 0)
return -ENODEV;
desc = hdrs.usb_cdc_union_desc;
if (!desc)
return -ENODEV;
data = usb_ifnum_to_if(serial->dev, desc->bSlaveInterface0);
if (!data)
return -ENODEV;
ret = usb_serial_claim_interface(serial, data);
if (ret)
return ret;
usb_set_serial_data(serial, (void *)id->driver_info);
return 0;
}
static int xr_gpio_init(struct usb_serial_port *port, const struct xr_type *type)
{
u16 mask, mode;
int ret;
/*
* Configure all pins as GPIO except for Receive and Transmit Toggle.
*/
mode = 0;
if (type->have_xmit_toggle)
mode |= XR_GPIO_MODE_RX_TOGGLE | XR_GPIO_MODE_TX_TOGGLE;
ret = xr_set_reg_uart(port, type->gpio_mode, mode);
if (ret)
return ret;
/*
* Configure DTR and RTS as outputs and make sure they are deasserted
* (active low), and configure RI, CD, DSR and CTS as inputs.
*/
mask = XR_GPIO_DTR | XR_GPIO_RTS;
ret = xr_set_reg_uart(port, type->gpio_direction, mask);
if (ret)
return ret;
ret = xr_set_reg_uart(port, type->gpio_set, mask);
if (ret)
return ret;
return 0;
}
static int xr_port_probe(struct usb_serial_port *port)
{
struct usb_interface_descriptor *desc;
const struct xr_type *type;
struct xr_data *data;
enum xr_type_id type_id;
int ret;
type_id = (int)(unsigned long)usb_get_serial_data(port->serial);
type = &xr_types[type_id];
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->type = type;
desc = &port->serial->interface->cur_altsetting->desc;
if (type_id == XR21V141X)
data->channel = desc->bInterfaceNumber / 2;
else
data->channel = desc->bInterfaceNumber;
usb_set_serial_port_data(port, data);
if (type->custom_driver) {
ret = xr_set_reg_uart(port, type->custom_driver,
XR_CUSTOM_DRIVER_ACTIVE);
if (ret)
goto err_free;
}
ret = xr_gpio_init(port, type);
if (ret)
goto err_free;
return 0;
err_free:
kfree(data);
return ret;
}
static void xr_port_remove(struct usb_serial_port *port)
{
struct xr_data *data = usb_get_serial_port_data(port);
kfree(data);
}
#define XR_DEVICE(vid, pid, type) \
USB_DEVICE_INTERFACE_CLASS((vid), (pid), USB_CLASS_COMM), \
.driver_info = (type)
static const struct usb_device_id id_table[] = {
{ XR_DEVICE(0x04e2, 0x1400, XR2280X) },
{ XR_DEVICE(0x04e2, 0x1401, XR2280X) },
{ XR_DEVICE(0x04e2, 0x1402, XR2280X) },
{ XR_DEVICE(0x04e2, 0x1403, XR2280X) },
{ XR_DEVICE(0x04e2, 0x1410, XR21V141X) },
{ XR_DEVICE(0x04e2, 0x1411, XR21B1411) },
{ XR_DEVICE(0x04e2, 0x1412, XR21V141X) },
{ XR_DEVICE(0x04e2, 0x1414, XR21V141X) },
{ XR_DEVICE(0x04e2, 0x1420, XR21B142X) },
{ XR_DEVICE(0x04e2, 0x1422, XR21B142X) },
{ XR_DEVICE(0x04e2, 0x1424, XR21B142X) },
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_serial_driver xr_device = {
.driver = {
.owner = THIS_MODULE,
.name = "xr_serial",
},
.id_table = id_table,
.num_ports = 1,
.probe = xr_probe,
.port_probe = xr_port_probe,
.port_remove = xr_port_remove,
.open = xr_open,
.close = xr_close,
.break_ctl = xr_break_ctl,
.set_termios = xr_set_termios,
.tiocmget = xr_tiocmget,
.tiocmset = xr_tiocmset,
.dtr_rts = xr_dtr_rts
};
static struct usb_serial_driver * const serial_drivers[] = {
&xr_device, NULL
};
module_usb_serial_driver(serial_drivers, id_table);
MODULE_AUTHOR("Manivannan Sadhasivam <mani@kernel.org>");
MODULE_DESCRIPTION("MaxLinear/Exar USB to Serial driver");
MODULE_LICENSE("GPL");