120 lines
2.6 KiB
YAML
120 lines
2.6 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0-only
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: TFP410 DPI to DVI encoder
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Tomi Valkeinen <tomi.valkeinen@ti.com>
|
||
|
|
- Jyri Sarha <jsarha@ti.com>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: ti,tfp410
|
||
|
|
|
||
|
|
reg:
|
||
|
|
description: I2C address of the device.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
powerdown-gpios:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
ti,deskew:
|
||
|
|
description:
|
||
|
|
Data de-skew value in 350ps increments, from 0 to 7, as configured
|
||
|
|
through the DK[3:1] pins. The de-skew multiplier is computed as
|
||
|
|
(DK[3:1] - 4), so it ranges from -4 to 3.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
minimum: 0
|
||
|
|
maximum: 7
|
||
|
|
|
||
|
|
ports:
|
||
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
||
|
|
|
||
|
|
properties:
|
||
|
|
port@0:
|
||
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
||
|
|
unevaluatedProperties: false
|
||
|
|
description: DPI input port.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
endpoint:
|
||
|
|
$ref: /schemas/graph.yaml#/$defs/endpoint-base
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
properties:
|
||
|
|
pclk-sample:
|
||
|
|
description:
|
||
|
|
Endpoint sampling edge.
|
||
|
|
enum:
|
||
|
|
- 0 # Falling edge
|
||
|
|
- 1 # Rising edge
|
||
|
|
default: 0
|
||
|
|
|
||
|
|
bus-width:
|
||
|
|
description:
|
||
|
|
Endpoint bus width.
|
||
|
|
enum:
|
||
|
|
- 12 # 12 data lines connected and dual-edge mode
|
||
|
|
- 24 # 24 data lines connected and single-edge mode
|
||
|
|
default: 24
|
||
|
|
|
||
|
|
port@1:
|
||
|
|
$ref: /schemas/graph.yaml#/properties/port
|
||
|
|
description: DVI output port.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- port@0
|
||
|
|
- port@1
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- ports
|
||
|
|
|
||
|
|
if:
|
||
|
|
required:
|
||
|
|
- reg
|
||
|
|
then:
|
||
|
|
properties:
|
||
|
|
ti,deskew: false
|
||
|
|
else:
|
||
|
|
required:
|
||
|
|
- ti,deskew
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
|
||
|
|
tfp410: encoder {
|
||
|
|
compatible = "ti,tfp410";
|
||
|
|
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
|
||
|
|
ti,deskew = <3>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
tfp410_in: endpoint {
|
||
|
|
pclk-sample = <1>;
|
||
|
|
bus-width = <24>;
|
||
|
|
remote-endpoint = <&dpi_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
tfp410_out: endpoint {
|
||
|
|
remote-endpoint = <&dvi_connector_in>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
...
|