117 lines
2.7 KiB
YAML
117 lines
2.7 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Lightning Mountain centralized DMA controllers.
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- chuanhua.lei@intel.com
|
||
|
|
- mallikarjunax.reddy@intel.com
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: dma-controller.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- intel,lgm-cdma
|
||
|
|
- intel,lgm-dma2tx
|
||
|
|
- intel,lgm-dma1rx
|
||
|
|
- intel,lgm-dma1tx
|
||
|
|
- intel,lgm-dma0tx
|
||
|
|
- intel,lgm-dma3
|
||
|
|
- intel,lgm-toe-dma30
|
||
|
|
- intel,lgm-toe-dma31
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
"#dma-cells":
|
||
|
|
const: 3
|
||
|
|
description:
|
||
|
|
The first cell is the peripheral's DMA request line.
|
||
|
|
The second cell is the peripheral's (port) number corresponding to the channel.
|
||
|
|
The third cell is the burst length of the channel.
|
||
|
|
|
||
|
|
dma-channels:
|
||
|
|
minimum: 1
|
||
|
|
maximum: 16
|
||
|
|
|
||
|
|
dma-channel-mask:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
resets:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
reset-names:
|
||
|
|
items:
|
||
|
|
- const: ctrl
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
intel,dma-poll-cnt:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description:
|
||
|
|
DMA descriptor polling counter is used to control the poling mechanism
|
||
|
|
for the descriptor fetching for all channels.
|
||
|
|
|
||
|
|
intel,dma-byte-en:
|
||
|
|
type: boolean
|
||
|
|
description:
|
||
|
|
DMA byte enable is only valid for DMA write(RX).
|
||
|
|
Byte enable(1) means DMA write will be based on the number of dwords
|
||
|
|
instead of the whole burst.
|
||
|
|
|
||
|
|
intel,dma-drb:
|
||
|
|
type: boolean
|
||
|
|
description:
|
||
|
|
DMA descriptor read back to make sure data and desc synchronization.
|
||
|
|
|
||
|
|
intel,dma-dburst-wr:
|
||
|
|
type: boolean
|
||
|
|
description:
|
||
|
|
Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
|
||
|
|
if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
|
||
|
|
It only applies to RX DMA and memcopy DMA.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
dma0: dma-controller@e0e00000 {
|
||
|
|
compatible = "intel,lgm-cdma";
|
||
|
|
reg = <0xe0e00000 0x1000>;
|
||
|
|
#dma-cells = <3>;
|
||
|
|
dma-channels = <16>;
|
||
|
|
dma-channel-mask = <0xFFFF>;
|
||
|
|
interrupt-parent = <&ioapic1>;
|
||
|
|
interrupts = <82 1>;
|
||
|
|
resets = <&rcu0 0x30 0>;
|
||
|
|
reset-names = "ctrl";
|
||
|
|
clocks = <&cgu0 80>;
|
||
|
|
intel,dma-poll-cnt = <4>;
|
||
|
|
intel,dma-byte-en;
|
||
|
|
intel,dma-drb;
|
||
|
|
};
|
||
|
|
- |
|
||
|
|
dma3: dma-controller@ec800000 {
|
||
|
|
compatible = "intel,lgm-dma3";
|
||
|
|
reg = <0xec800000 0x1000>;
|
||
|
|
clocks = <&cgu0 71>;
|
||
|
|
resets = <&rcu0 0x10 9>;
|
||
|
|
#dma-cells = <3>;
|
||
|
|
intel,dma-poll-cnt = <16>;
|
||
|
|
intel,dma-byte-en;
|
||
|
|
intel,dma-dburst-wr;
|
||
|
|
};
|