193 lines
6.2 KiB
YAML
193 lines
6.2 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
%YAML 1.2
|
||
|
---
|
||
|
$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml#
|
||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
||
|
maintainers:
|
||
|
- Thierry Reding <thierry.reding@gmail.com>
|
||
|
- Jon Hunter <jonathanh@nvidia.com>
|
||
|
|
||
|
title: NVIDIA Tegra I2C controller driver
|
||
|
|
||
|
properties:
|
||
|
compatible:
|
||
|
oneOf:
|
||
|
- description: Tegra20 has 4 generic I2C controller. This can support
|
||
|
master and slave mode of I2C communication. The i2c-tegra driver
|
||
|
only support master mode of I2C communication. Driver of I2C
|
||
|
controller is only compatible with "nvidia,tegra20-i2c".
|
||
|
const: nvidia,tegra20-i2c
|
||
|
- description: Tegra20 has specific I2C controller called as DVC I2C
|
||
|
controller. This only support master mode of I2C communication.
|
||
|
Register interface/offset and interrupts handling are different than
|
||
|
generic I2C controller. Driver of DVC I2C controller is only
|
||
|
compatible with "nvidia,tegra20-i2c-dvc".
|
||
|
const: nvidia,tegra20-i2c-dvc
|
||
|
- description: |
|
||
|
Tegra30 has 5 generic I2C controller. This controller is very much
|
||
|
similar to Tegra20 I2C controller with additional feature: Continue
|
||
|
Transfer Support. This feature helps to implement M_NO_START as per
|
||
|
I2C core API transfer flags. Driver of I2C controller is compatible
|
||
|
with "nvidia,tegra30-i2c" to enable the continue transfer support.
|
||
|
This is also compatible with "nvidia,tegra20-i2c" without continue
|
||
|
transfer support.
|
||
|
items:
|
||
|
- const: nvidia,tegra30-i2c
|
||
|
- const: nvidia,tegra20-i2c
|
||
|
- description: |
|
||
|
Tegra114 has 5 generic I2C controllers. This controller is very much
|
||
|
similar to Tegra30 I2C controller with some hardware modification:
|
||
|
- Tegra30/Tegra20 I2C controller has 2 clock source called div-clk
|
||
|
and fast-clk. Tegra114 has only one clock source called as
|
||
|
div-clk and hence clock mechanism is changed in I2C controller.
|
||
|
- Tegra30/Tegra20 I2C controller has enabled per packet transfer
|
||
|
by default and there is no way to disable it. Tegra114 has this
|
||
|
interrupt disable by default and SW need to enable explicitly.
|
||
|
Due to above changes, Tegra114 I2C driver makes incompatible with
|
||
|
previous hardware driver. Hence, Tegra114 I2C controller is
|
||
|
compatible with "nvidia,tegra114-i2c".
|
||
|
const: nvidia,tegra114-i2c
|
||
|
- description: |
|
||
|
Tegra124 has 6 generic I2C controllers. These controllers are very
|
||
|
similar to those found on Tegra114 but also contain several hardware
|
||
|
improvements and new registers.
|
||
|
const: nvidia,tegra124-i2c
|
||
|
- description: |
|
||
|
Tegra210 has 6 generic I2C controllers. These controllers are very
|
||
|
similar to those found on Tegra124.
|
||
|
items:
|
||
|
- const: nvidia,tegra210-i2c
|
||
|
- const: nvidia,tegra124-i2c
|
||
|
- description: |
|
||
|
Tegra210 has one I2C controller that is on host1x bus and is part of
|
||
|
the VE power domain and typically used for camera use-cases. This VI
|
||
|
I2C controller is mostly compatible with the programming model of
|
||
|
the regular I2C controllers with a few exceptions. The I2C registers
|
||
|
start at an offset of 0xc00 (instead of 0), registers are 16 bytes
|
||
|
apart (rather than 4) and the controller does not support slave
|
||
|
mode.
|
||
|
const: nvidia,tegra210-i2c-vi
|
||
|
- description: |
|
||
|
Tegra186 has 9 generic I2C controllers, two of which are in the AON
|
||
|
(always-on) partition of the SoC. All of these controllers are very
|
||
|
similar to those found on Tegra210.
|
||
|
const: nvidia,tegra186-i2c
|
||
|
- description: |
|
||
|
Tegra194 has 8 generic I2C controllers, two of which are in the AON
|
||
|
(always-on) partition of the SoC. All of these controllers are very
|
||
|
similar to those found on Tegra186. However, these controllers have
|
||
|
support for 64 KiB transactions whereas earlier chips supported no
|
||
|
more than 4 KiB per transactions.
|
||
|
const: nvidia,tegra194-i2c
|
||
|
|
||
|
reg:
|
||
|
maxItems: 1
|
||
|
|
||
|
interrupts:
|
||
|
maxItems: 1
|
||
|
|
||
|
'#address-cells':
|
||
|
const: 1
|
||
|
|
||
|
'#size-cells':
|
||
|
const: 0
|
||
|
|
||
|
clocks:
|
||
|
minItems: 1
|
||
|
maxItems: 2
|
||
|
|
||
|
clock-names:
|
||
|
minItems: 1
|
||
|
maxItems: 2
|
||
|
|
||
|
resets:
|
||
|
items:
|
||
|
- description: module reset
|
||
|
|
||
|
reset-names:
|
||
|
items:
|
||
|
- const: i2c
|
||
|
|
||
|
dmas:
|
||
|
items:
|
||
|
- description: DMA channel for the reception FIFO
|
||
|
- description: DMA channel for the transmission FIFO
|
||
|
|
||
|
dma-names:
|
||
|
items:
|
||
|
- const: rx
|
||
|
- const: tx
|
||
|
|
||
|
allOf:
|
||
|
- $ref: /schemas/i2c/i2c-controller.yaml
|
||
|
- if:
|
||
|
properties:
|
||
|
compatible:
|
||
|
contains:
|
||
|
enum:
|
||
|
- nvidia,tegra20-i2c
|
||
|
- nvidia,tegra30-i2c
|
||
|
then:
|
||
|
properties:
|
||
|
clock-names:
|
||
|
items:
|
||
|
- const: div-clk
|
||
|
- const: fast-clk
|
||
|
|
||
|
- if:
|
||
|
properties:
|
||
|
compatible:
|
||
|
contains:
|
||
|
const: nvidia,tegra114-i2c
|
||
|
then:
|
||
|
properties:
|
||
|
clock-names:
|
||
|
items:
|
||
|
- const: div-clk
|
||
|
|
||
|
- if:
|
||
|
properties:
|
||
|
compatible:
|
||
|
contains:
|
||
|
const: nvidia,tegra210-i2c
|
||
|
then:
|
||
|
properties:
|
||
|
clock-names:
|
||
|
items:
|
||
|
- const: div-clk
|
||
|
|
||
|
- if:
|
||
|
properties:
|
||
|
compatible:
|
||
|
contains:
|
||
|
const: nvidia,tegra210-i2c-vi
|
||
|
then:
|
||
|
properties:
|
||
|
clock-names:
|
||
|
items:
|
||
|
- const: div-clk
|
||
|
- const: slow
|
||
|
power-domains:
|
||
|
items:
|
||
|
- description: phandle to the VENC power domain
|
||
|
|
||
|
unevaluatedProperties: false
|
||
|
|
||
|
examples:
|
||
|
- |
|
||
|
i2c@7000c000 {
|
||
|
compatible = "nvidia,tegra20-i2c";
|
||
|
reg = <0x7000c000 0x100>;
|
||
|
interrupts = <0 38 0x04>;
|
||
|
clocks = <&tegra_car 12>, <&tegra_car 124>;
|
||
|
clock-names = "div-clk", "fast-clk";
|
||
|
resets = <&tegra_car 12>;
|
||
|
reset-names = "i2c";
|
||
|
dmas = <&apbdma 16>, <&apbdma 16>;
|
||
|
dma-names = "rx", "tx";
|
||
|
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
};
|