92 lines
2.1 KiB
YAML
92 lines
2.1 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Puranjay Mohan <puranjay12@gmail.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
|
||
|
|
support both I2C & SPI interfaces
|
||
|
|
https://www.analog.com/en/products/adxl355.html
|
||
|
|
https://www.analog.com/en/products/adxl359.html
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- adi,adxl355
|
||
|
|
- adi,adxl359
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 3
|
||
|
|
description: |
|
||
|
|
Type for DRDY should be IRQ_TYPE_EDGE_RISING.
|
||
|
|
Three configurable interrupt lines exist.
|
||
|
|
|
||
|
|
interrupt-names:
|
||
|
|
description: Specify which interrupt line is in use.
|
||
|
|
items:
|
||
|
|
enum:
|
||
|
|
- INT1
|
||
|
|
- INT2
|
||
|
|
- DRDY
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 3
|
||
|
|
|
||
|
|
vdd-supply:
|
||
|
|
description: Regulator that provides power to the sensor
|
||
|
|
|
||
|
|
vddio-supply:
|
||
|
|
description: Regulator that provides power to the bus
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
/* Example for a I2C device node */
|
||
|
|
accelerometer@1d {
|
||
|
|
compatible = "adi,adxl355";
|
||
|
|
reg = <0x1d>;
|
||
|
|
interrupt-parent = <&gpio>;
|
||
|
|
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
interrupt-names = "DRDY";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
spi {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
accelerometer@0 {
|
||
|
|
compatible = "adi,adxl355";
|
||
|
|
reg = <0>;
|
||
|
|
spi-max-frequency = <1000000>;
|
||
|
|
interrupt-parent = <&gpio>;
|
||
|
|
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
interrupt-names = "DRDY";
|
||
|
|
};
|
||
|
|
};
|