89 lines
2.5 KiB
YAML
89 lines
2.5 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Michael Hennerich <michael.hennerich@analog.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
The ad7780 is a sigma-delta analog to digital converter. This driver provides
|
||
|
|
reading voltage values and status bits from both the ad778x and ad717x series.
|
||
|
|
Its interface also allows writing on the FILTER and GAIN GPIO pins on the
|
||
|
|
ad778x.
|
||
|
|
|
||
|
|
Specifications on the converters can be found at:
|
||
|
|
AD7170:
|
||
|
|
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
|
||
|
|
AD7171:
|
||
|
|
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
|
||
|
|
AD7780:
|
||
|
|
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
|
||
|
|
AD7781:
|
||
|
|
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- adi,ad7170
|
||
|
|
- adi,ad7171
|
||
|
|
- adi,ad7780
|
||
|
|
- adi,ad7781
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
avdd-supply:
|
||
|
|
description:
|
||
|
|
The regulator supply for the ADC reference voltage.
|
||
|
|
|
||
|
|
powerdown-gpios:
|
||
|
|
description:
|
||
|
|
Must be the device tree identifier of the PDRST pin. If
|
||
|
|
specified, it will be asserted during driver probe. As the
|
||
|
|
line is active high, it should be marked GPIO_ACTIVE_HIGH.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
adi,gain-gpios:
|
||
|
|
description:
|
||
|
|
Must be the device tree identifier of the GAIN pin. Only for
|
||
|
|
the ad778x chips. If specified, it will be asserted during
|
||
|
|
driver probe. As the line is active low, it should be marked
|
||
|
|
GPIO_ACTIVE_LOW.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
adi,filter-gpios:
|
||
|
|
description:
|
||
|
|
Must be the device tree identifier of the FILTER pin. Only
|
||
|
|
for the ad778x chips. If specified, it will be asserted
|
||
|
|
during driver probe. As the line is active low, it should be
|
||
|
|
marked GPIO_ACTIVE_LOW.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
spi {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
adc@0 {
|
||
|
|
compatible = "adi,ad7780";
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
avdd-supply = <&vdd_supply>;
|
||
|
|
powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||
|
|
adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||
|
|
adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
};
|