94 lines
2.5 KiB
YAML
94 lines
2.5 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: ADC that forms part of an ASPEED server management processor.
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Billy Tsai <billy_tsai@aspeedtech.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
• 10-bits resolution for 16 voltage channels.
|
||
|
|
• The device split into two individual engine and each contains 8 voltage
|
||
|
|
channels.
|
||
|
|
• Channel scanning can be non-continuous.
|
||
|
|
• Programmable ADC clock frequency.
|
||
|
|
• Programmable upper and lower threshold for each channels.
|
||
|
|
• Interrupt when larger or less than threshold for each channels.
|
||
|
|
• Support hysteresis for each channels.
|
||
|
|
• Built-in a compensating method.
|
||
|
|
• Built-in a register to trim internal reference voltage.
|
||
|
|
• Internal or External reference voltage.
|
||
|
|
• Support 2 Internal reference voltage 1.2v or 2.5v.
|
||
|
|
• Integrate dividing circuit for battery sensing.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- aspeed,ast2600-adc0
|
||
|
|
- aspeed,ast2600-adc1
|
||
|
|
description:
|
||
|
|
Their trimming data, which is used to calibrate internal reference volage,
|
||
|
|
locates in different address of OTP.
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
maxItems: 1
|
||
|
|
description:
|
||
|
|
Input clock used to derive the sample clock. Expected to be the
|
||
|
|
SoC's APB clock.
|
||
|
|
|
||
|
|
resets:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
"#io-channel-cells":
|
||
|
|
const: 1
|
||
|
|
|
||
|
|
vref-supply:
|
||
|
|
description:
|
||
|
|
The external regulator supply ADC reference voltage.
|
||
|
|
|
||
|
|
aspeed,int-vref-microvolt:
|
||
|
|
enum: [1200000, 2500000]
|
||
|
|
description:
|
||
|
|
ADC internal reference voltage in microvolts.
|
||
|
|
|
||
|
|
aspeed,battery-sensing:
|
||
|
|
type: boolean
|
||
|
|
description:
|
||
|
|
Inform the driver that last channel will be used to sensor battery.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- clocks
|
||
|
|
- resets
|
||
|
|
- "#io-channel-cells"
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/clock/ast2600-clock.h>
|
||
|
|
adc0: adc@1e6e9000 {
|
||
|
|
compatible = "aspeed,ast2600-adc0";
|
||
|
|
reg = <0x1e6e9000 0x100>;
|
||
|
|
clocks = <&syscon ASPEED_CLK_APB2>;
|
||
|
|
resets = <&syscon ASPEED_RESET_ADC>;
|
||
|
|
#io-channel-cells = <1>;
|
||
|
|
aspeed,int-vref-microvolt = <2500000>;
|
||
|
|
};
|
||
|
|
adc1: adc@1e6e9100 {
|
||
|
|
compatible = "aspeed,ast2600-adc1";
|
||
|
|
reg = <0x1e6e9100 0x100>;
|
||
|
|
clocks = <&syscon ASPEED_CLK_APB2>;
|
||
|
|
resets = <&syscon ASPEED_RESET_ADC>;
|
||
|
|
#io-channel-cells = <1>;
|
||
|
|
aspeed,int-vref-microvolt = <2500000>;
|
||
|
|
};
|
||
|
|
...
|