101 lines
2.4 KiB
YAML
101 lines
2.4 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/iio/adc/atmel,sama5d2-adc.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Eugen Hristev <eugen.hristev@microchip.com>
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- atmel,sama5d2-adc
|
||
|
|
- microchip,sam9x60-adc
|
||
|
|
- microchip,sama7g5-adc
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clock-names:
|
||
|
|
const: adc_clk
|
||
|
|
|
||
|
|
vref-supply: true
|
||
|
|
vddana-supply: true
|
||
|
|
|
||
|
|
atmel,min-sample-rate-hz:
|
||
|
|
description: Minimum sampling rate, it depends on SoC.
|
||
|
|
|
||
|
|
atmel,max-sample-rate-hz:
|
||
|
|
description: Maximum sampling rate, it depends on SoC.
|
||
|
|
|
||
|
|
atmel,startup-time-ms:
|
||
|
|
description: Startup time expressed in ms, it depends on SoC.
|
||
|
|
|
||
|
|
atmel,trigger-edge-type:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description:
|
||
|
|
One of possible edge types for the ADTRG hardware trigger pin.
|
||
|
|
When the specific edge type is detected, the conversion will
|
||
|
|
start. Should be one of IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING
|
||
|
|
or IRQ_TYPE_EDGE_BOTH.
|
||
|
|
enum: [1, 2, 3]
|
||
|
|
|
||
|
|
dmas:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
dma-names:
|
||
|
|
const: rx
|
||
|
|
|
||
|
|
"#io-channel-cells":
|
||
|
|
const: 1
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- interrupts
|
||
|
|
- clocks
|
||
|
|
- clock-names
|
||
|
|
- vref-supply
|
||
|
|
- vddana-supply
|
||
|
|
- atmel,min-sample-rate-hz
|
||
|
|
- atmel,max-sample-rate-hz
|
||
|
|
- atmel,startup-time-ms
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/dma/at91.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
soc {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
|
||
|
|
adc@fc030000 {
|
||
|
|
compatible = "atmel,sama5d2-adc";
|
||
|
|
reg = <0xfc030000 0x100>;
|
||
|
|
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
|
||
|
|
clocks = <&adc_clk>;
|
||
|
|
clock-names = "adc_clk";
|
||
|
|
atmel,min-sample-rate-hz = <200000>;
|
||
|
|
atmel,max-sample-rate-hz = <20000000>;
|
||
|
|
atmel,startup-time-ms = <4>;
|
||
|
|
vddana-supply = <&vdd_3v3_lp_reg>;
|
||
|
|
vref-supply = <&vdd_3v3_lp_reg>;
|
||
|
|
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
|
||
|
|
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
|
||
|
|
dma-names = "rx";
|
||
|
|
#io-channel-cells = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
...
|