76 lines
1.6 KiB
YAML
76 lines
1.6 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Goodix GT7375P touchscreen
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Douglas Anderson <dianders@chromium.org>
|
||
|
|
|
||
|
|
description:
|
||
|
|
Supports the Goodix GT7375P touchscreen.
|
||
|
|
This touchscreen uses the i2c-hid protocol but has some non-standard
|
||
|
|
power sequencing required.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
oneOf:
|
||
|
|
- const: goodix,gt7375p
|
||
|
|
- items:
|
||
|
|
- const: goodix,gt7986u
|
||
|
|
- const: goodix,gt7375p
|
||
|
|
|
||
|
|
reg:
|
||
|
|
enum:
|
||
|
|
- 0x5d
|
||
|
|
- 0x14
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
reset-gpios:
|
||
|
|
true
|
||
|
|
|
||
|
|
vdd-supply:
|
||
|
|
description: The 3.3V supply to the touchscreen.
|
||
|
|
|
||
|
|
mainboard-vddio-supply:
|
||
|
|
description:
|
||
|
|
The supply on the main board needed to power up IO signals going
|
||
|
|
to the touchscreen. This supply need not go to the touchscreen
|
||
|
|
itself as long as it allows the main board to make signals compatible
|
||
|
|
with what the touchscreen is expecting for its IO rails.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- interrupts
|
||
|
|
- reset-gpios
|
||
|
|
- vdd-supply
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
ap_ts: touchscreen@5d {
|
||
|
|
compatible = "goodix,gt7375p";
|
||
|
|
reg = <0x5d>;
|
||
|
|
|
||
|
|
interrupt-parent = <&tlmm>;
|
||
|
|
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
|
||
|
|
reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
|
||
|
|
vdd-supply = <&pp3300_ts>;
|
||
|
|
};
|
||
|
|
};
|