128 lines
3.6 KiB
YAML
128 lines
3.6 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/memory-controllers/exynos-srom.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Samsung Exynos SoC SROM Controller driver
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
|
||
|
|
description: |+
|
||
|
|
The SROM controller can be used to attach external peripherals. In this case
|
||
|
|
extra properties, describing the bus behind it, should be specified.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
items:
|
||
|
|
- const: samsung,exynos4210-srom
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
"#address-cells":
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
"#size-cells":
|
||
|
|
const: 1
|
||
|
|
|
||
|
|
ranges:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 4
|
||
|
|
description: |
|
||
|
|
Reflects the memory layout with four integer values per bank. Format:
|
||
|
|
<bank-number> 0 <parent address of bank> <size>
|
||
|
|
Up to four banks are supported.
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
"^.*@[0-3],[a-f0-9]+$":
|
||
|
|
type: object
|
||
|
|
description:
|
||
|
|
The actual device nodes should be added as subnodes to the SROMc node.
|
||
|
|
These subnodes, in addition to regular device specification, should
|
||
|
|
contain the following properties, describing configuration
|
||
|
|
of the relevant SROM bank.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
reg:
|
||
|
|
description:
|
||
|
|
Bank number, base address (relative to start of the bank) and size
|
||
|
|
of the memory mapped for the device. Note that base address will be
|
||
|
|
typically 0 as this is the start of the bank.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
reg-io-width:
|
||
|
|
enum: [1, 2]
|
||
|
|
description:
|
||
|
|
Data width in bytes (1 or 2). If omitted, default of 1 is used.
|
||
|
|
|
||
|
|
samsung,srom-page-mode:
|
||
|
|
description:
|
||
|
|
If page mode is set, 4 data page mode will be configured,
|
||
|
|
else normal (1 data) page mode will be set.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
samsung,srom-timing:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
items:
|
||
|
|
minItems: 6
|
||
|
|
maxItems: 6
|
||
|
|
description: |
|
||
|
|
Array of 6 integers, specifying bank timings in the following order:
|
||
|
|
Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
|
||
|
|
Each value is specified in cycles and has the following meaning
|
||
|
|
and valid range:
|
||
|
|
Tacp: Page mode access cycle at Page mode (0 - 15)
|
||
|
|
Tcah: Address holding time after CSn (0 - 15)
|
||
|
|
Tcoh: Chip selection hold on OEn (0 - 15)
|
||
|
|
Tacc: Access cycle (0 - 31, the actual time is N + 1)
|
||
|
|
Tcos: Chip selection set-up before OEn (0 - 15)
|
||
|
|
Tacs: Address set-up before CSn (0 - 15)
|
||
|
|
|
||
|
|
required:
|
||
|
|
- reg
|
||
|
|
- samsung,srom-timing
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
// Example: basic definition, no banks are configured
|
||
|
|
memory-controller@12560000 {
|
||
|
|
compatible = "samsung,exynos4210-srom";
|
||
|
|
reg = <0x12560000 0x14>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- |
|
||
|
|
// Example: SROMc with SMSC911x ethernet chip on bank 3
|
||
|
|
memory-controller@12570000 {
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 0 0x04000000 0x20000 // Bank0
|
||
|
|
1 0 0x05000000 0x20000 // Bank1
|
||
|
|
2 0 0x06000000 0x20000 // Bank2
|
||
|
|
3 0 0x07000000 0x20000>; // Bank3
|
||
|
|
|
||
|
|
compatible = "samsung,exynos4210-srom";
|
||
|
|
reg = <0x12570000 0x14>;
|
||
|
|
|
||
|
|
ethernet@3,0 {
|
||
|
|
compatible = "smsc,lan9115";
|
||
|
|
reg = <3 0 0x10000>; // Bank 3, offset = 0
|
||
|
|
phy-mode = "mii";
|
||
|
|
interrupt-parent = <&gpx0>;
|
||
|
|
interrupts = <5 8>;
|
||
|
|
reg-io-width = <2>;
|
||
|
|
smsc,irq-push-pull;
|
||
|
|
smsc,force-internal-phy;
|
||
|
|
|
||
|
|
samsung,srom-page-mode;
|
||
|
|
samsung,srom-timing = <9 12 1 9 1 1>;
|
||
|
|
};
|
||
|
|
};
|