192 lines
7.1 KiB
Plaintext
192 lines
7.1 KiB
Plaintext
|
Lantiq XWAY pinmux controller
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube")
|
||
|
|
"lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or
|
||
|
|
"lantiq,xrx200-pinctrl")
|
||
|
|
"lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl")
|
||
|
|
"lantiq,<chip>-pinctrl", where <chip> is:
|
||
|
|
"ase" (XWAY AMAZON Family)
|
||
|
|
"danube" (XWAY DANUBE Family)
|
||
|
|
"xrx100" (XWAY xRX100 Family)
|
||
|
|
"xrx200" (XWAY xRX200 Family)
|
||
|
|
"xrx300" (XWAY xRX300 Family)
|
||
|
|
- reg: Should contain the physical address and length of the gpio/pinmux
|
||
|
|
register range
|
||
|
|
|
||
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the
|
||
|
|
common pinctrl bindings used by client devices, including the meaning of the
|
||
|
|
phrase "pin configuration node".
|
||
|
|
|
||
|
|
Lantiq's pin configuration nodes act as a container for an arbitrary number of
|
||
|
|
subnodes. Each of these subnodes represents some desired configuration for a
|
||
|
|
pin, a group, or a list of pins or groups. This configuration can include the
|
||
|
|
mux function to select on those group(s), and two pin configuration parameters:
|
||
|
|
pull-up and open-drain
|
||
|
|
|
||
|
|
The name of each subnode is not important as long as it is unique; all subnodes
|
||
|
|
should be enumerated and processed purely based on their content.
|
||
|
|
|
||
|
|
Each subnode only affects those parameters that are explicitly listed. In
|
||
|
|
other words, a subnode that lists a mux function but no pin configuration
|
||
|
|
parameters implies no information about any pin configuration parameters.
|
||
|
|
Similarly, a pin subnode that describes a pullup parameter implies no
|
||
|
|
information about e.g. the mux function.
|
||
|
|
|
||
|
|
We support 2 types of nodes.
|
||
|
|
|
||
|
|
Definition of mux function groups:
|
||
|
|
|
||
|
|
Required subnode-properties:
|
||
|
|
- lantiq,groups : An array of strings. Each string contains the name of a group.
|
||
|
|
Valid values for these names are listed below.
|
||
|
|
- lantiq,function: A string containing the name of the function to mux to the
|
||
|
|
group. Valid values for function names are listed below.
|
||
|
|
|
||
|
|
Valid values for group and function names:
|
||
|
|
|
||
|
|
XWAY: (DEPRECATED: Use DANUBE)
|
||
|
|
mux groups:
|
||
|
|
exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
|
||
|
|
ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
|
||
|
|
spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2,
|
||
|
|
gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
|
||
|
|
req3
|
||
|
|
|
||
|
|
functions:
|
||
|
|
spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu
|
||
|
|
|
||
|
|
XR9: ( DEPRECATED: Use xRX100/xRX200)
|
||
|
|
mux groups:
|
||
|
|
exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25,
|
||
|
|
ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy,
|
||
|
|
nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6,
|
||
|
|
asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
|
||
|
|
clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
|
||
|
|
gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
|
||
|
|
|
||
|
|
functions:
|
||
|
|
spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy
|
||
|
|
|
||
|
|
AMAZON:
|
||
|
|
mux groups:
|
||
|
|
exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2,
|
||
|
|
spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0,
|
||
|
|
clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
|
||
|
|
|
||
|
|
functions:
|
||
|
|
spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
|
||
|
|
|
||
|
|
DANUBE:
|
||
|
|
mux groups:
|
||
|
|
exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
|
||
|
|
ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
|
||
|
|
spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
|
||
|
|
gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
|
||
|
|
req1, req2, req3, dfe led0, dfe led1
|
||
|
|
|
||
|
|
functions:
|
||
|
|
spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
|
||
|
|
|
||
|
|
xRX100:
|
||
|
|
mux groups:
|
||
|
|
exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
|
||
|
|
ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
|
||
|
|
spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
|
||
|
|
spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
|
||
|
|
clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
|
||
|
|
dfe led0, dfe led1
|
||
|
|
|
||
|
|
functions:
|
||
|
|
spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
|
||
|
|
|
||
|
|
xRX200:
|
||
|
|
mux groups:
|
||
|
|
exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
|
||
|
|
ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
|
||
|
|
spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
|
||
|
|
spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts,
|
||
|
|
usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di,
|
||
|
|
usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2,
|
||
|
|
stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
|
||
|
|
gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
|
||
|
|
gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
|
||
|
|
|
||
|
|
functions:
|
||
|
|
spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
|
||
|
|
|
||
|
|
xRX300:
|
||
|
|
mux groups:
|
||
|
|
exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
|
||
|
|
nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
|
||
|
|
nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
|
||
|
|
spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx,
|
||
|
|
usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2,
|
||
|
|
mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
|
||
|
|
|
||
|
|
functions:
|
||
|
|
spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
|
||
|
|
|
||
|
|
|
||
|
|
Definition of pin configurations:
|
||
|
|
|
||
|
|
Required subnode-properties:
|
||
|
|
- lantiq,pins : An array of strings. Each string contains the name of a pin.
|
||
|
|
Valid values for these names are listed below.
|
||
|
|
|
||
|
|
Optional subnode-properties:
|
||
|
|
- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
|
||
|
|
0: none, 1: down, 2: up.
|
||
|
|
- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
|
||
|
|
|
||
|
|
Valid values for XWAY pin names: (DEPRECATED: Use DANUBE)
|
||
|
|
Pinconf pins can be referenced via the names io0-io31.
|
||
|
|
|
||
|
|
Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200)
|
||
|
|
Pinconf pins can be referenced via the names io0-io55.
|
||
|
|
|
||
|
|
Valid values for AMAZON pin names:
|
||
|
|
Pinconf pins can be referenced via the names io0-io31.
|
||
|
|
|
||
|
|
Valid values for DANUBE pin names:
|
||
|
|
Pinconf pins can be referenced via the names io0-io31.
|
||
|
|
|
||
|
|
Valid values for xRX100 pin names:
|
||
|
|
Pinconf pins can be referenced via the names io0-io55.
|
||
|
|
|
||
|
|
Valid values for xRX200 pin names:
|
||
|
|
Pinconf pins can be referenced via the names io0-io49.
|
||
|
|
|
||
|
|
Valid values for xRX300 pin names:
|
||
|
|
Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
|
||
|
|
io13-io19,io23-io27,io34-io36,
|
||
|
|
io42-io43,io48-io61.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
gpio: pinmux@e100b10 {
|
||
|
|
compatible = "lantiq,danube-pinctrl";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&state_default>;
|
||
|
|
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
gpio-controller;
|
||
|
|
reg = <0xE100B10 0xA0>;
|
||
|
|
|
||
|
|
state_default: pinmux {
|
||
|
|
stp {
|
||
|
|
lantiq,groups = "stp";
|
||
|
|
lantiq,function = "stp";
|
||
|
|
};
|
||
|
|
pci {
|
||
|
|
lantiq,groups = "gnt1";
|
||
|
|
lantiq,function = "pci";
|
||
|
|
};
|
||
|
|
conf_out {
|
||
|
|
lantiq,pins = "io4", "io5", "io6"; /* stp */
|
||
|
|
lantiq,open-drain;
|
||
|
|
lantiq,pull = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|