156 lines
6.8 KiB
Plaintext
156 lines
6.8 KiB
Plaintext
|
ST Microelectronics, SPEAr pinmux controller
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : "st,spear300-pinmux"
|
||
|
|
: "st,spear310-pinmux"
|
||
|
|
: "st,spear320-pinmux"
|
||
|
|
: "st,spear1310-pinmux"
|
||
|
|
: "st,spear1340-pinmux"
|
||
|
|
- reg : Address range of the pinctrl registers
|
||
|
|
- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
|
||
|
|
- Its values for SPEAr300:
|
||
|
|
- NAND_MODE : <0>
|
||
|
|
- NOR_MODE : <1>
|
||
|
|
- PHOTO_FRAME_MODE : <2>
|
||
|
|
- LEND_IP_PHONE_MODE : <3>
|
||
|
|
- HEND_IP_PHONE_MODE : <4>
|
||
|
|
- LEND_WIFI_PHONE_MODE : <5>
|
||
|
|
- HEND_WIFI_PHONE_MODE : <6>
|
||
|
|
- ATA_PABX_WI2S_MODE : <7>
|
||
|
|
- ATA_PABX_I2S_MODE : <8>
|
||
|
|
- CAML_LCDW_MODE : <9>
|
||
|
|
- CAMU_LCD_MODE : <10>
|
||
|
|
- CAMU_WLCD_MODE : <11>
|
||
|
|
- CAML_LCD_MODE : <12>
|
||
|
|
- Its values for SPEAr320:
|
||
|
|
- AUTO_NET_SMII_MODE : <0>
|
||
|
|
- AUTO_NET_MII_MODE : <1>
|
||
|
|
- AUTO_EXP_MODE : <2>
|
||
|
|
- SMALL_PRINTERS_MODE : <3>
|
||
|
|
- EXTENDED_MODE : <4>
|
||
|
|
|
||
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the common
|
||
|
|
pinctrl bindings used by client devices.
|
||
|
|
|
||
|
|
SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
|
||
|
|
of these subnodes represents muxing for a pin, a group, or a list of pins or
|
||
|
|
groups.
|
||
|
|
|
||
|
|
The name of each subnode is not important; all subnodes should be enumerated
|
||
|
|
and processed purely based on their content.
|
||
|
|
|
||
|
|
Required subnode-properties:
|
||
|
|
- st,pins : An array of strings. Each string contains the name of a pin or
|
||
|
|
group.
|
||
|
|
- st,function: A string containing the name of the function to mux to the pin or
|
||
|
|
group. See the SPEAr's TRM to determine which are valid for each pin or group.
|
||
|
|
|
||
|
|
Valid values for group and function names can be found from looking at the
|
||
|
|
group and function arrays in driver files:
|
||
|
|
drivers/pinctrl/spear/pinctrl-spear3*0.c
|
||
|
|
|
||
|
|
Valid values for group names are:
|
||
|
|
For All SPEAr3xx machines:
|
||
|
|
"firda_grp", "i2c0_grp", "ssp_cs_grp", "ssp0_grp", "mii0_grp",
|
||
|
|
"gpio0_pin0_grp", "gpio0_pin1_grp", "gpio0_pin2_grp", "gpio0_pin3_grp",
|
||
|
|
"gpio0_pin4_grp", "gpio0_pin5_grp", "uart0_ext_grp", "uart0_grp",
|
||
|
|
"timer_0_1_grp", timer_0_1_pins, "timer_2_3_grp"
|
||
|
|
|
||
|
|
For SPEAr300 machines:
|
||
|
|
"fsmc_2chips_grp", "fsmc_4chips_grp", "clcd_lcdmode_grp",
|
||
|
|
"clcd_pfmode_grp", "tdm_grp", "i2c_clk_grp_grp", "caml_grp", "camu_grp",
|
||
|
|
"dac_grp", "i2s_grp", "sdhci_4bit_grp", "sdhci_8bit_grp",
|
||
|
|
"gpio1_0_to_3_grp", "gpio1_4_to_7_grp"
|
||
|
|
|
||
|
|
For SPEAr310 machines:
|
||
|
|
"emi_cs_0_to_5_grp", "uart1_grp", "uart2_grp", "uart3_grp", "uart4_grp",
|
||
|
|
"uart5_grp", "fsmc_grp", "rs485_0_grp", "rs485_1_grp", "tdm_grp"
|
||
|
|
|
||
|
|
For SPEAr320 machines:
|
||
|
|
"clcd_grp", "emi_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "spp_grp",
|
||
|
|
"sdhci_led_grp", "sdhci_cd_12_grp", "sdhci_cd_51_grp", "i2s_grp",
|
||
|
|
"uart1_grp", "uart1_modem_2_to_7_grp", "uart1_modem_31_to_36_grp",
|
||
|
|
"uart1_modem_34_to_45_grp", "uart1_modem_80_to_85_grp", "uart2_grp",
|
||
|
|
"uart3_8_9_grp", "uart3_15_16_grp", "uart3_41_42_grp",
|
||
|
|
"uart3_52_53_grp", "uart3_73_74_grp", "uart3_94_95_grp",
|
||
|
|
"uart3_98_99_grp", "uart4_6_7_grp", "uart4_13_14_grp",
|
||
|
|
"uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp",
|
||
|
|
"uart4_100_101_grp", "uart5_4_5_grp", "uart5_37_38_grp",
|
||
|
|
"uart5_69_70_grp", "uart5_90_91_grp", "uart6_2_3_grp",
|
||
|
|
"uart6_88_89_grp", "rs485_grp", "touchscreen_grp", "can0_grp",
|
||
|
|
"can1_grp", "pwm0_1_pin_8_9_grp", "pwm0_1_pin_14_15_grp",
|
||
|
|
"pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", "pwm0_1_pin_42_43_grp",
|
||
|
|
"pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp", "pwm2_pin_7_grp",
|
||
|
|
"pwm2_pin_13_grp", "pwm2_pin_29_grp", "pwm2_pin_34_grp",
|
||
|
|
"pwm2_pin_41_grp", "pwm2_pin_58_grp", "pwm2_pin_87_grp",
|
||
|
|
"pwm3_pin_6_grp", "pwm3_pin_12_grp", "pwm3_pin_28_grp",
|
||
|
|
"pwm3_pin_40_grp", "pwm3_pin_57_grp", "pwm3_pin_86_grp",
|
||
|
|
"ssp1_17_20_grp", "ssp1_36_39_grp", "ssp1_48_51_grp", "ssp1_65_68_grp",
|
||
|
|
"ssp1_94_97_grp", "ssp2_13_16_grp", "ssp2_32_35_grp", "ssp2_44_47_grp",
|
||
|
|
"ssp2_61_64_grp", "ssp2_90_93_grp", "mii2_grp", "smii0_1_grp",
|
||
|
|
"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
|
||
|
|
"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
|
||
|
|
|
||
|
|
For SPEAr1310 machines:
|
||
|
|
"i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
|
||
|
|
"i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
|
||
|
|
"smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
|
||
|
|
"smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
|
||
|
|
"nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
|
||
|
|
"keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
|
||
|
|
"gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
|
||
|
|
"sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
|
||
|
|
"uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
|
||
|
|
"uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
|
||
|
|
"i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
|
||
|
|
"i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
|
||
|
|
"i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
|
||
|
|
"can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
|
||
|
|
"pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
|
||
|
|
"ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
|
||
|
|
|
||
|
|
For SPEAr1340 machines:
|
||
|
|
"pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
|
||
|
|
"keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
|
||
|
|
"spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
|
||
|
|
"pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
|
||
|
|
"vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
|
||
|
|
"cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
|
||
|
|
"ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
|
||
|
|
"uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
|
||
|
|
"rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
|
||
|
|
"sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
|
||
|
|
"miphy_dbg_grp", "pcie_grp", "sata_grp"
|
||
|
|
|
||
|
|
Valid values for function names are:
|
||
|
|
For All SPEAr3xx machines:
|
||
|
|
"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
|
||
|
|
"uart0", "timer_0_1", "timer_2_3"
|
||
|
|
|
||
|
|
For SPEAr300 machines:
|
||
|
|
"fsmc", "clcd", "tdm", "i2c1", "cam", "dac", "i2s", "sdhci", "gpio1"
|
||
|
|
|
||
|
|
For SPEAr310 machines:
|
||
|
|
"emi", "uart1", "uart2", "uart3", "uart4", "uart5", "fsmc", "rs485_0",
|
||
|
|
"rs485_1", "tdm"
|
||
|
|
|
||
|
|
For SPEAr320 machines:
|
||
|
|
"clcd", "emi", "fsmc", "spp", "sdhci", "i2s", "uart1", "uart1_modem",
|
||
|
|
"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
|
||
|
|
"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
|
||
|
|
"mii0_1", "i2c1", "i2c2"
|
||
|
|
|
||
|
|
|
||
|
|
For SPEAr1310 machines:
|
||
|
|
"i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
|
||
|
|
"rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
|
||
|
|
"gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
|
||
|
|
"uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
|
||
|
|
"i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
|
||
|
|
|
||
|
|
For SPEAr1340 machines:
|
||
|
|
"pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
|
||
|
|
"pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
|
||
|
|
"uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
|
||
|
|
"xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"
|