90 lines
2.6 KiB
YAML
90 lines
2.6 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
|
# Copyright (C) 2021 Sebastian Reichel
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: TI BQ24735 Li-Ion Battery Charger
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Sebastian Reichel <sre@kernel.org>
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: power-supply.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: ti,bq24735
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
description: AC adapter plug event interrupt
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
ti,ac-detect-gpios:
|
||
|
|
maxItems: 1
|
||
|
|
description: |
|
||
|
|
This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
|
||
|
|
that is configured as an input and connected to the ACOK pin on the bq24735.
|
||
|
|
Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
|
||
|
|
absence despite ACOK being active (high) on AC adapter presence.
|
||
|
|
|
||
|
|
ti,charge-current:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Used to control and set the charging current.
|
||
|
|
This value must be between 128mA and 8.128A with a 64mA step resolution.
|
||
|
|
The POR value is 0x0000h. This number is in mA (e.g. 8192).
|
||
|
|
See spec for more information about the ChargeCurrent (0x14h) register.
|
||
|
|
|
||
|
|
ti,charge-voltage:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Used to control and set the charging voltage.
|
||
|
|
This value must be between 1.024V and 19.2V with a 16mV step resolution.
|
||
|
|
The POR value is 0x0000h. This number is in mV (e.g. 19200).
|
||
|
|
See spec for more information about the ChargeVoltage (0x15h) register.
|
||
|
|
|
||
|
|
ti,input-current:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Used to control and set the charger input current.
|
||
|
|
This value must be between 128mA and 8.064A with a 128mA step resolution.
|
||
|
|
The POR value is 0x1000h. This number is in mA (e.g. 8064).
|
||
|
|
See the spec for more information about the InputCurrent (0x3fh) register.
|
||
|
|
|
||
|
|
ti,external-control:
|
||
|
|
type: boolean
|
||
|
|
description: |
|
||
|
|
Indicates that the charger is configured externally and that the host should not
|
||
|
|
attempt to enable/disable charging or set the charge voltage/current.
|
||
|
|
|
||
|
|
poll-interval:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
|
||
|
|
i2c0 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
charger@9 {
|
||
|
|
compatible = "ti,bq24735";
|
||
|
|
reg = <0x9>;
|
||
|
|
ti,ac-detect-gpios = <&gpio 72 0x1>;
|
||
|
|
};
|
||
|
|
};
|