172 lines
5.3 KiB
YAML
172 lines
5.3 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
%YAML 1.2
|
||
|
---
|
||
|
$id: http://devicetree.org/schemas/spi/renesas,sh-msiof.yaml#
|
||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
||
|
title: Renesas MSIOF SPI controller
|
||
|
|
||
|
maintainers:
|
||
|
- Geert Uytterhoeven <geert+renesas@glider.be>
|
||
|
|
||
|
allOf:
|
||
|
- $ref: spi-controller.yaml#
|
||
|
|
||
|
properties:
|
||
|
compatible:
|
||
|
oneOf:
|
||
|
- items:
|
||
|
- const: renesas,msiof-sh73a0 # SH-Mobile AG5
|
||
|
- const: renesas,sh-mobile-msiof # generic SH-Mobile compatible
|
||
|
# device
|
||
|
- items:
|
||
|
- enum:
|
||
|
- renesas,msiof-r8a7742 # RZ/G1H
|
||
|
- renesas,msiof-r8a7743 # RZ/G1M
|
||
|
- renesas,msiof-r8a7744 # RZ/G1N
|
||
|
- renesas,msiof-r8a7745 # RZ/G1E
|
||
|
- renesas,msiof-r8a77470 # RZ/G1C
|
||
|
- renesas,msiof-r8a7790 # R-Car H2
|
||
|
- renesas,msiof-r8a7791 # R-Car M2-W
|
||
|
- renesas,msiof-r8a7792 # R-Car V2H
|
||
|
- renesas,msiof-r8a7793 # R-Car M2-N
|
||
|
- renesas,msiof-r8a7794 # R-Car E2
|
||
|
- const: renesas,rcar-gen2-msiof # generic R-Car Gen2 and RZ/G1
|
||
|
# compatible device
|
||
|
- items:
|
||
|
- enum:
|
||
|
- renesas,msiof-r8a774a1 # RZ/G2M
|
||
|
- renesas,msiof-r8a774b1 # RZ/G2N
|
||
|
- renesas,msiof-r8a774c0 # RZ/G2E
|
||
|
- renesas,msiof-r8a774e1 # RZ/G2H
|
||
|
- renesas,msiof-r8a7795 # R-Car H3
|
||
|
- renesas,msiof-r8a7796 # R-Car M3-W
|
||
|
- renesas,msiof-r8a77961 # R-Car M3-W+
|
||
|
- renesas,msiof-r8a77965 # R-Car M3-N
|
||
|
- renesas,msiof-r8a77970 # R-Car V3M
|
||
|
- renesas,msiof-r8a77980 # R-Car V3H
|
||
|
- renesas,msiof-r8a77990 # R-Car E3
|
||
|
- renesas,msiof-r8a77995 # R-Car D3
|
||
|
- const: renesas,rcar-gen3-msiof # generic R-Car Gen3 and RZ/G2
|
||
|
# compatible device
|
||
|
- items:
|
||
|
- enum:
|
||
|
- renesas,msiof-r8a779a0 # R-Car V3U
|
||
|
- renesas,msiof-r8a779f0 # R-Car S4-8
|
||
|
- renesas,msiof-r8a779g0 # R-Car V4H
|
||
|
- const: renesas,rcar-gen4-msiof # generic R-Car Gen4
|
||
|
# compatible device
|
||
|
- items:
|
||
|
- const: renesas,sh-msiof # deprecated
|
||
|
|
||
|
reg:
|
||
|
minItems: 1
|
||
|
maxItems: 2
|
||
|
oneOf:
|
||
|
- items:
|
||
|
- description: CPU and DMA engine registers
|
||
|
- items:
|
||
|
- description: CPU registers
|
||
|
- description: DMA engine registers
|
||
|
|
||
|
interrupts:
|
||
|
maxItems: 1
|
||
|
|
||
|
clocks:
|
||
|
maxItems: 1
|
||
|
|
||
|
power-domains:
|
||
|
maxItems: 1
|
||
|
|
||
|
resets:
|
||
|
maxItems: 1
|
||
|
|
||
|
num-cs:
|
||
|
description: |
|
||
|
Total number of chip selects (default is 1).
|
||
|
Up to 3 native chip selects are supported:
|
||
|
0: MSIOF_SYNC
|
||
|
1: MSIOF_SS1
|
||
|
2: MSIOF_SS2
|
||
|
Hardware limitations related to chip selects:
|
||
|
- Native chip selects are always deasserted in between transfers
|
||
|
that are part of the same message. Use cs-gpios to work around
|
||
|
this.
|
||
|
- All slaves using native chip selects must use the same spi-cs-high
|
||
|
configuration. Use cs-gpios to work around this.
|
||
|
- When using GPIO chip selects, at least one native chip select must
|
||
|
be left unused, as it will be driven anyway.
|
||
|
minimum: 1
|
||
|
maximum: 3
|
||
|
default: 1
|
||
|
|
||
|
dmas:
|
||
|
minItems: 2
|
||
|
maxItems: 4
|
||
|
|
||
|
dma-names:
|
||
|
minItems: 2
|
||
|
maxItems: 4
|
||
|
items:
|
||
|
enum: [ tx, rx ]
|
||
|
|
||
|
renesas,dtdl:
|
||
|
description: delay sync signal (setup) in transmit mode.
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
enum:
|
||
|
- 0 # no bit delay
|
||
|
- 50 # 0.5-clock-cycle delay
|
||
|
- 100 # 1-clock-cycle delay
|
||
|
- 150 # 1.5-clock-cycle delay
|
||
|
- 200 # 2-clock-cycle delay
|
||
|
|
||
|
renesas,syncdl:
|
||
|
description: delay sync signal (hold) in transmit mode
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
enum:
|
||
|
- 0 # no bit delay
|
||
|
- 50 # 0.5-clock-cycle delay
|
||
|
- 100 # 1-clock-cycle delay
|
||
|
- 150 # 1.5-clock-cycle delay
|
||
|
- 200 # 2-clock-cycle delay
|
||
|
- 300 # 3-clock-cycle delay
|
||
|
|
||
|
renesas,tx-fifo-size:
|
||
|
# deprecated for soctype-specific bindings
|
||
|
description: |
|
||
|
Override the default TX fifo size. Unit is words. Ignored if 0.
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
default: 64
|
||
|
|
||
|
renesas,rx-fifo-size:
|
||
|
# deprecated for soctype-specific bindings
|
||
|
description: |
|
||
|
Override the default RX fifo size. Unit is words. Ignored if 0.
|
||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
default: 64
|
||
|
|
||
|
required:
|
||
|
- compatible
|
||
|
- reg
|
||
|
- interrupts
|
||
|
- '#address-cells'
|
||
|
- '#size-cells'
|
||
|
|
||
|
unevaluatedProperties: false
|
||
|
|
||
|
examples:
|
||
|
- |
|
||
|
#include <dt-bindings/clock/r8a7791-clock.h>
|
||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
||
|
msiof0: spi@e6e20000 {
|
||
|
compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof";
|
||
|
reg = <0xe6e20000 0x0064>;
|
||
|
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
|
||
|
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
|
||
|
dma-names = "tx", "rx";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
};
|