linux-zen-desktop/arch/arm64/boot/dts/bitmain/bm1880.dtsi

227 lines
5.1 KiB
Plaintext
Raw Normal View History

2023-08-30 17:31:07 +02:00
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Linaro Ltd.
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
#include <dt-bindings/clock/bm1880-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/bitmain,bm1880-reset.h>
/ {
compatible = "bitmain,bm1880";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
enable-method = "psci";
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
secmon@100000000 {
reg = <0x1 0x00000000 0x0 0x20000>;
no-map;
};
jpu@130000000 {
reg = <0x1 0x30000000 0x0 0x08000000>; // 128M
no-map;
};
vpu@138000000 {
reg = <0x1 0x38000000 0x0 0x08000000>; // 128M
no-map;
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
osc: osc {
compatible = "fixed-clock";
clock-frequency = <25000000>;
#clock-cells = <0>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic: interrupt-controller@50001000 {
compatible = "arm,gic-400";
reg = <0x0 0x50001000 0x0 0x1000>,
<0x0 0x50002000 0x0 0x2000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <3>;
};
sctrl: system-controller@50010000 {
compatible = "bitmain,bm1880-sctrl", "syscon",
"simple-mfd";
reg = <0x0 0x50010000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x50010000 0x1000>;
pinctrl: pinctrl@400 {
compatible = "bitmain,bm1880-pinctrl";
reg = <0x400 0x120>;
};
clk: clock-controller@e8 {
compatible = "bitmain,bm1880-clk";
reg = <0xe8 0x0c>, <0x800 0xb0>;
reg-names = "pll", "sys";
clocks = <&osc>;
clock-names = "osc";
#clock-cells = <1>;
};
rst: reset-controller@c00 {
compatible = "bitmain,bm1880-reset";
reg = <0xc00 0x8>;
#reset-cells = <1>;
};
};
gpio0: gpio@50027000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x50027000 0x0 0x400>;
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpio1: gpio@50027400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x50027400 0x0 0x400>;
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpio2: gpio@50027800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0x0 0x50027800 0x0 0x400>;
portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <8>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
};
};
uart0: serial@58018000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x58018000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
<&clk BM1880_CLK_APB_UART>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst BM1880_RST_UART0_1_CLK>;
status = "disabled";
};
uart1: serial@5801A000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801a000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
<&clk BM1880_CLK_APB_UART>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst BM1880_RST_UART0_1_ACLK>;
status = "disabled";
};
uart2: serial@5801C000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801c000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
<&clk BM1880_CLK_APB_UART>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst BM1880_RST_UART2_3_CLK>;
status = "disabled";
};
uart3: serial@5801E000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801e000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
<&clk BM1880_CLK_APB_UART>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst BM1880_RST_UART2_3_ACLK>;
status = "disabled";
};
};
};