558 lines
13 KiB
Plaintext
558 lines
13 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
|
/*
|
||
|
|
* Copyright 2019 NXP
|
||
|
|
* Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "imx8mm.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "Variscite VAR-SOM-MX8MM module";
|
||
|
|
compatible = "variscite,var-som-mx8mm", "fsl,imx8mm";
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
stdout-path = &uart4;
|
||
|
|
};
|
||
|
|
|
||
|
|
memory@40000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x0 0x40000000 0 0x80000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_eth_phy: regulator-eth-phy {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_reg_eth_phy>;
|
||
|
|
regulator-name = "eth_phy_pwr";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&A53_0 {
|
||
|
|
cpu-supply = <&buck2_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&A53_1 {
|
||
|
|
cpu-supply = <&buck2_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&A53_2 {
|
||
|
|
cpu-supply = <&buck2_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&A53_3 {
|
||
|
|
cpu-supply = <&buck2_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ddrc {
|
||
|
|
operating-points-v2 = <&ddrc_opp_table>;
|
||
|
|
|
||
|
|
ddrc_opp_table: opp-table {
|
||
|
|
compatible = "operating-points-v2";
|
||
|
|
|
||
|
|
opp-25000000 {
|
||
|
|
opp-hz = /bits/ 64 <25000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
opp-100000000 {
|
||
|
|
opp-hz = /bits/ 64 <100000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
opp-750000000 {
|
||
|
|
opp-hz = /bits/ 64 <750000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ecspi1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
||
|
|
cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
|
||
|
|
<&gpio1 0 GPIO_ACTIVE_LOW>;
|
||
|
|
/delete-property/ dmas;
|
||
|
|
/delete-property/ dma-names;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
/* Resistive touch controller */
|
||
|
|
touchscreen@0 {
|
||
|
|
reg = <0>;
|
||
|
|
compatible = "ti,ads7846";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_restouch>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
|
||
|
|
spi-max-frequency = <1500000>;
|
||
|
|
pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
ti,x-min = /bits/ 16 <125>;
|
||
|
|
touchscreen-size-x = <4008>;
|
||
|
|
ti,y-min = /bits/ 16 <282>;
|
||
|
|
touchscreen-size-y = <3864>;
|
||
|
|
ti,x-plate-ohms = /bits/ 16 <180>;
|
||
|
|
touchscreen-max-pressure = <255>;
|
||
|
|
touchscreen-average-samples = <10>;
|
||
|
|
ti,debounce-tol = /bits/ 16 <3>;
|
||
|
|
ti,debounce-rep = /bits/ 16 <1>;
|
||
|
|
ti,settle-delay-usec = /bits/ 16 <150>;
|
||
|
|
ti,keep-vref-on;
|
||
|
|
wakeup-source;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&fec1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
||
|
|
phy-mode = "rgmii";
|
||
|
|
phy-handle = <ðphy>;
|
||
|
|
phy-supply = <®_eth_phy>;
|
||
|
|
fsl,magic-packet;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
mdio {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
ethphy: ethernet-phy@4 {
|
||
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||
|
|
reg = <4>;
|
||
|
|
reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||
|
|
reset-assert-us = <10000>;
|
||
|
|
reset-deassert-us = <10000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
pmic@4b {
|
||
|
|
compatible = "rohm,bd71847";
|
||
|
|
reg = <0x4b>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
||
|
|
interrupt-parent = <&gpio2>;
|
||
|
|
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
rohm,reset-snvs-powered;
|
||
|
|
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clocks = <&osc_32k 0>;
|
||
|
|
clock-output-names = "clk-32k-out";
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
buck1_reg: BUCK1 {
|
||
|
|
regulator-name = "buck1";
|
||
|
|
regulator-min-microvolt = <700000>;
|
||
|
|
regulator-max-microvolt = <1300000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-ramp-delay = <1250>;
|
||
|
|
};
|
||
|
|
|
||
|
|
buck2_reg: BUCK2 {
|
||
|
|
regulator-name = "buck2";
|
||
|
|
regulator-min-microvolt = <700000>;
|
||
|
|
regulator-max-microvolt = <1300000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-ramp-delay = <1250>;
|
||
|
|
rohm,dvs-run-voltage = <1000000>;
|
||
|
|
rohm,dvs-idle-voltage = <900000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
buck3_reg: BUCK3 {
|
||
|
|
regulator-name = "buck3";
|
||
|
|
regulator-min-microvolt = <700000>;
|
||
|
|
regulator-max-microvolt = <1350000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
buck4_reg: BUCK4 {
|
||
|
|
regulator-name = "buck4";
|
||
|
|
regulator-min-microvolt = <3000000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
buck5_reg: BUCK5 {
|
||
|
|
regulator-name = "buck5";
|
||
|
|
regulator-min-microvolt = <1605000>;
|
||
|
|
regulator-max-microvolt = <1995000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
buck6_reg: BUCK6 {
|
||
|
|
regulator-name = "buck6";
|
||
|
|
regulator-min-microvolt = <800000>;
|
||
|
|
regulator-max-microvolt = <1400000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
ldo1_reg: LDO1 {
|
||
|
|
regulator-name = "ldo1";
|
||
|
|
regulator-min-microvolt = <1600000>;
|
||
|
|
regulator-max-microvolt = <1900000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
ldo2_reg: LDO2 {
|
||
|
|
regulator-name = "ldo2";
|
||
|
|
regulator-min-microvolt = <800000>;
|
||
|
|
regulator-max-microvolt = <900000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
ldo3_reg: LDO3 {
|
||
|
|
regulator-name = "ldo3";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
ldo4_reg: LDO4 {
|
||
|
|
regulator-name = "ldo4";
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
ldo5_reg: LDO5 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
ldo6_reg: LDO6 {
|
||
|
|
regulator-name = "ldo6";
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
/* TODO: configure audio, as of now just put a placeholder */
|
||
|
|
wm8904: codec@1a {
|
||
|
|
compatible = "wlf,wm8904";
|
||
|
|
reg = <0x1a>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&snvs_pwrkey {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Bluetooth */
|
||
|
|
&uart2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
|
assigned-clocks = <&clk IMX8MM_CLK_UART2>;
|
||
|
|
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
|
||
|
|
uart-has-rtscts;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Console */
|
||
|
|
&uart4 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbotg1 {
|
||
|
|
dr_mode = "otg";
|
||
|
|
usb-role-switch;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbotg2 {
|
||
|
|
dr_mode = "otg";
|
||
|
|
usb-role-switch;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* WIFI */
|
||
|
|
&usdhc1 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
||
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
||
|
|
bus-width = <4>;
|
||
|
|
non-removable;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
brcmf: bcrmf@1 {
|
||
|
|
reg = <1>;
|
||
|
|
compatible = "brcm,bcm4329-fmac";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* SD */
|
||
|
|
&usdhc2 {
|
||
|
|
assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
|
||
|
|
assigned-clock-rates = <200000000>;
|
||
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
||
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
||
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
||
|
|
cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||
|
|
bus-width = <4>;
|
||
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* eMMC */
|
||
|
|
&usdhc3 {
|
||
|
|
assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
|
||
|
|
assigned-clock-rates = <400000000>;
|
||
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
||
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||
|
|
bus-width = <8>;
|
||
|
|
non-removable;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&wdog1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
||
|
|
fsl,ext-reset-output;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&iomuxc {
|
||
|
|
pinctrl_ecspi1: ecspi1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13
|
||
|
|
MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13
|
||
|
|
MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x13
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x13
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_fec1: fec1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
||
|
|
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
||
|
|
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
||
|
|
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
||
|
|
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
||
|
|
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
||
|
|
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
||
|
|
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
||
|
|
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
||
|
|
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
||
|
|
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
||
|
|
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
||
|
|
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
||
|
|
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c1: i2c1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
|
||
|
|
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c3: i2c3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
|
||
|
|
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pmic: pmicirqgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_reg_eth_phy: regethphygrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x41
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_restouch: restouchgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart2: uart2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140
|
||
|
|
MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140
|
||
|
|
MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140
|
||
|
|
MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart4: uart4grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
|
||
|
|
MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc1: usdhc1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
|
||
|
|
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
|
||
|
|
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
|
||
|
|
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
|
||
|
|
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
|
||
|
|
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
|
||
|
|
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
|
||
|
|
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
|
||
|
|
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
|
||
|
|
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
|
||
|
|
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
|
||
|
|
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
|
||
|
|
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
|
||
|
|
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
|
||
|
|
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
|
||
|
|
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xc1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2: usdhc2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
|
||
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
|
||
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
|
||
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
|
||
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
|
||
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
|
||
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
|
||
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
|
||
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
|
||
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
|
||
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
|
||
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
|
||
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
|
||
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
|
||
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
|
||
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3: usdhc3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
|
||
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
|
||
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
|
||
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
|
||
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
|
||
|
|
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
|
||
|
|
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_wdog: wdoggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|