612 lines
14 KiB
Plaintext
612 lines
14 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
/*
|
||
|
* Device Tree File for the Kontron pitx-imx8m board.
|
||
|
*
|
||
|
* Copyright (C) 2021 Heiko Thiery <heiko.thiery@gmail.com>
|
||
|
*/
|
||
|
|
||
|
/dts-v1/;
|
||
|
|
||
|
#include "imx8mq.dtsi"
|
||
|
#include <dt-bindings/net/ti-dp83867.h>
|
||
|
|
||
|
/ {
|
||
|
model = "Kontron pITX-imx8m";
|
||
|
compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
|
||
|
|
||
|
aliases {
|
||
|
i2c0 = &i2c1;
|
||
|
i2c1 = &i2c2;
|
||
|
i2c2 = &i2c3;
|
||
|
mmc0 = &usdhc1;
|
||
|
mmc1 = &usdhc2;
|
||
|
serial0 = &uart1;
|
||
|
serial1 = &uart2;
|
||
|
serial2 = &uart3;
|
||
|
spi0 = &qspi0;
|
||
|
spi1 = &ecspi2;
|
||
|
};
|
||
|
|
||
|
chosen {
|
||
|
stdout-path = "serial2:115200n8";
|
||
|
};
|
||
|
|
||
|
pcie0_refclk: pcie0-clock {
|
||
|
compatible = "fixed-clock";
|
||
|
#clock-cells = <0>;
|
||
|
clock-frequency = <100000000>;
|
||
|
};
|
||
|
|
||
|
pcie1_refclk: pcie1-clock {
|
||
|
compatible = "fixed-clock";
|
||
|
#clock-cells = <0>;
|
||
|
clock-frequency = <100000000>;
|
||
|
};
|
||
|
|
||
|
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
|
||
|
compatible = "regulator-fixed";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_reg_usdhc2>;
|
||
|
regulator-name = "V_3V3_SD";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||
|
off-on-delay-us = <20000>;
|
||
|
enable-active-high;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&ecspi2 {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
|
||
|
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
|
||
|
status = "okay";
|
||
|
|
||
|
tpm@0 {
|
||
|
compatible = "infineon,slb9670";
|
||
|
reg = <0>;
|
||
|
spi-max-frequency = <43000000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&fec1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_fec1>;
|
||
|
phy-mode = "rgmii-id";
|
||
|
phy-handle = <ðphy0>;
|
||
|
fsl,magic-packet;
|
||
|
status = "okay";
|
||
|
|
||
|
mdio {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
ethphy0: ethernet-phy@0 {
|
||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||
|
reg = <0>;
|
||
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
|
||
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||
|
reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||
|
reset-assert-us = <10>;
|
||
|
reset-deassert-us = <280>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c1 {
|
||
|
clock-frequency = <400000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
status = "okay";
|
||
|
|
||
|
pmic@8 {
|
||
|
compatible = "fsl,pfuze100";
|
||
|
fsl,pfuze-support-disable-sw;
|
||
|
reg = <0x8>;
|
||
|
|
||
|
regulators {
|
||
|
sw1a_reg: sw1ab {
|
||
|
regulator-name = "V_0V9_GPU";
|
||
|
regulator-min-microvolt = <825000>;
|
||
|
regulator-max-microvolt = <1100000>;
|
||
|
};
|
||
|
|
||
|
sw1c_reg: sw1c {
|
||
|
regulator-name = "V_0V9_VPU";
|
||
|
regulator-min-microvolt = <825000>;
|
||
|
regulator-max-microvolt = <1100000>;
|
||
|
};
|
||
|
|
||
|
sw2_reg: sw2 {
|
||
|
regulator-name = "V_1V1_NVCC_DRAM";
|
||
|
regulator-min-microvolt = <1100000>;
|
||
|
regulator-max-microvolt = <1100000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
sw3a_reg: sw3ab {
|
||
|
regulator-name = "V_1V0_DRAM";
|
||
|
regulator-min-microvolt = <825000>;
|
||
|
regulator-max-microvolt = <1100000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
sw4_reg: sw4 {
|
||
|
regulator-name = "V_1V8_S0";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
swbst_reg: swbst {
|
||
|
regulator-name = "NC";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5150000>;
|
||
|
};
|
||
|
|
||
|
snvs_reg: vsnvs {
|
||
|
regulator-name = "V_0V9_SNVS";
|
||
|
regulator-min-microvolt = <1000000>;
|
||
|
regulator-max-microvolt = <3000000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vref_reg: vrefddr {
|
||
|
regulator-name = "V_0V55_VREF_DDR";
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen1_reg: vgen1 {
|
||
|
regulator-name = "V_1V5_CSI";
|
||
|
regulator-min-microvolt = <800000>;
|
||
|
regulator-max-microvolt = <1550000>;
|
||
|
};
|
||
|
|
||
|
vgen2_reg: vgen2 {
|
||
|
regulator-name = "V_0V9_PHY";
|
||
|
regulator-min-microvolt = <850000>;
|
||
|
regulator-max-microvolt = <975000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen3_reg: vgen3 {
|
||
|
regulator-name = "V_1V8_PHY";
|
||
|
regulator-min-microvolt = <1675000>;
|
||
|
regulator-max-microvolt = <1975000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen4_reg: vgen4 {
|
||
|
regulator-name = "V_1V8_VDDA";
|
||
|
regulator-min-microvolt = <1625000>;
|
||
|
regulator-max-microvolt = <1875000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen5_reg: vgen5 {
|
||
|
regulator-name = "V_3V3_PHY";
|
||
|
regulator-min-microvolt = <3075000>;
|
||
|
regulator-max-microvolt = <3625000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vgen6_reg: vgen6 {
|
||
|
regulator-name = "V_2V8_CAM";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
fan-controller@1b {
|
||
|
compatible = "maxim,max6650";
|
||
|
reg = <0x1b>;
|
||
|
maxim,fan-microvolt = <5000000>;
|
||
|
};
|
||
|
|
||
|
rtc@32 {
|
||
|
compatible = "microcrystal,rv8803";
|
||
|
reg = <0x32>;
|
||
|
};
|
||
|
|
||
|
sensor@4b {
|
||
|
compatible = "national,lm75b";
|
||
|
reg = <0x4b>;
|
||
|
};
|
||
|
|
||
|
eeprom@51 {
|
||
|
compatible = "atmel,24c32";
|
||
|
reg = <0x51>;
|
||
|
pagesize = <32>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c2 {
|
||
|
clock-frequency = <100000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2c3 {
|
||
|
clock-frequency = <100000>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
/* M.2 B-key slot */
|
||
|
&pcie0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_pcie0>;
|
||
|
reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||
|
clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
|
||
|
<&pcie0_refclk>,
|
||
|
<&clk IMX8MQ_CLK_PCIE1_PHY>,
|
||
|
<&clk IMX8MQ_CLK_PCIE1_AUX>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
/* Intel Ethernet Controller I210/I211 */
|
||
|
&pcie1 {
|
||
|
clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
|
||
|
<&pcie1_refclk>,
|
||
|
<&clk IMX8MQ_CLK_PCIE2_PHY>,
|
||
|
<&clk IMX8MQ_CLK_PCIE2_AUX>;
|
||
|
fsl,max-link-speed = <1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&pgc_gpu {
|
||
|
power-supply = <&sw1a_reg>;
|
||
|
};
|
||
|
|
||
|
&pgc_vpu {
|
||
|
power-supply = <&sw1c_reg>;
|
||
|
};
|
||
|
|
||
|
&qspi0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_qspi>;
|
||
|
status = "okay";
|
||
|
|
||
|
flash@0 {
|
||
|
compatible = "jedec,spi-nor";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
reg = <0>;
|
||
|
spi-tx-bus-width = <1>;
|
||
|
spi-rx-bus-width = <4>;
|
||
|
m25p,fast-read;
|
||
|
spi-max-frequency = <50000000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&snvs_pwrkey {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart1>;
|
||
|
assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
|
||
|
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
|
||
|
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart3 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_uart3>;
|
||
|
uart-has-rtscts;
|
||
|
assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
|
||
|
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb3_phy0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb3_phy1 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb_dwc3_0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usb0>;
|
||
|
dr_mode = "otg";
|
||
|
hnp-disable;
|
||
|
srp-disable;
|
||
|
adp-disable;
|
||
|
maximum-speed = "high-speed";
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb_dwc3_1 {
|
||
|
dr_mode = "host";
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc1 {
|
||
|
assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
|
||
|
assigned-clock-rates = <400000000>;
|
||
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
||
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
||
|
vqmmc-supply = <&sw4_reg>;
|
||
|
bus-width = <8>;
|
||
|
non-removable;
|
||
|
no-sd;
|
||
|
no-sdio;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc2 {
|
||
|
assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
|
||
|
assigned-clock-rates = <200000000>;
|
||
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
||
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
||
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
||
|
bus-width = <4>;
|
||
|
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
||
|
wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
|
||
|
vmmc-supply = <®_usdhc2_vmmc>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&wdog1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_wdog>;
|
||
|
fsl,ext-reset-output;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&iomuxc {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_hog>;
|
||
|
|
||
|
pinctrl_hog: hoggrp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */
|
||
|
MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_gpio: gpiogrp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */
|
||
|
MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */
|
||
|
MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */
|
||
|
MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */
|
||
|
MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */
|
||
|
MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */
|
||
|
MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */
|
||
|
MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_pcie0: pcie0grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */
|
||
|
MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_reg_usdhc2: regusdhc2gpiogrp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_fec1: fec1grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
||
|
MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
|
||
|
MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
||
|
MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
||
|
MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
||
|
MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
||
|
MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
||
|
MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
||
|
MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
||
|
MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
||
|
MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
||
|
MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
||
|
MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
||
|
MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
||
|
MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16
|
||
|
MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c1: i2c1grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
|
||
|
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c2: i2c2grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
|
||
|
MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_i2c3: i2c3grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
|
||
|
MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_qspi: qspigrp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
|
||
|
MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
|
||
|
MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
|
||
|
MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
|
||
|
MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
|
||
|
MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_ecspi2: ecspi2grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19
|
||
|
MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19
|
||
|
MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_ecspi2_cs: ecspi2csgrp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart1: uart1grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
|
||
|
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart2: uart2grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
|
||
|
MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_uart3: uart3grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
|
||
|
MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
|
||
|
MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49
|
||
|
MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc1: usdhc1grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
|
||
|
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
|
||
|
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
|
||
|
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc1_100mhz: usdhc1-100grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
|
||
|
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
|
||
|
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
|
||
|
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc1_200mhz: usdhc1-200grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
|
||
|
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
|
||
|
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
|
||
|
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
|
||
|
MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x19
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2: usdhc2grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
|
||
|
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
|
||
|
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
|
||
|
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
|
||
|
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
|
||
|
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
|
||
|
MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2_100mhz: usdhc2-100grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
|
||
|
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
|
||
|
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
|
||
|
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
|
||
|
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
|
||
|
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
|
||
|
MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2_200mhz: usdhc2-200grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
|
||
|
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf
|
||
|
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf
|
||
|
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf
|
||
|
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf
|
||
|
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf
|
||
|
MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usb0: usb0grp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x19
|
||
|
MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_wdog: wdoggrp {
|
||
|
fsl,pins = <
|
||
|
MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
||
|
>;
|
||
|
};
|
||
|
};
|