kvj
/
linux-zen-desktop
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-desktop/arch/arm64/boot/dts/qcom/sdm630.dtsi

2536 lines
59 KiB
Plaintext
Raw Normal View History

Initial commit
2023-08-30 17:31:07 +02:00
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
* Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
*/
#include <dt-bindings/clock/qcom,gcc-sdm660.h>
#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/interconnect/qcom,sdm660.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/qcom,apr.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
mmc1 = &sdhc_1;
mmc2 = &sdhc_2;
};
chosen { };
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "xo_board";
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32764>;
clock-output-names = "sleep_clk";
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x100>;
enable-method = "psci";
cpu-idle-states = <&PERF_CPU_SLEEP_0
&PERF_CPU_SLEEP_1
&PERF_CLUSTER_SLEEP_0
&PERF_CLUSTER_SLEEP_1
&PERF_CLUSTER_SLEEP_2>;
capacity-dmips-mhz = <1126>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU1: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x101>;
enable-method = "psci";
cpu-idle-states = <&PERF_CPU_SLEEP_0
&PERF_CPU_SLEEP_1
&PERF_CLUSTER_SLEEP_0
&PERF_CLUSTER_SLEEP_1
&PERF_CLUSTER_SLEEP_2>;
capacity-dmips-mhz = <1126>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
CPU2: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x102>;
enable-method = "psci";
cpu-idle-states = <&PERF_CPU_SLEEP_0
&PERF_CPU_SLEEP_1
&PERF_CLUSTER_SLEEP_0
&PERF_CLUSTER_SLEEP_1
&PERF_CLUSTER_SLEEP_2>;
capacity-dmips-mhz = <1126>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
CPU3: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x103>;
enable-method = "psci";
cpu-idle-states = <&PERF_CPU_SLEEP_0
&PERF_CPU_SLEEP_1
&PERF_CLUSTER_SLEEP_0
&PERF_CLUSTER_SLEEP_1
&PERF_CLUSTER_SLEEP_2>;
capacity-dmips-mhz = <1126>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
CPU4: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
cpu-idle-states = <&PWR_CPU_SLEEP_0
&PWR_CPU_SLEEP_1
&PWR_CLUSTER_SLEEP_0
&PWR_CLUSTER_SLEEP_1
&PWR_CLUSTER_SLEEP_2>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU5: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
cpu-idle-states = <&PWR_CPU_SLEEP_0
&PWR_CPU_SLEEP_1
&PWR_CLUSTER_SLEEP_0
&PWR_CLUSTER_SLEEP_1
&PWR_CLUSTER_SLEEP_2>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
CPU6: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
cpu-idle-states = <&PWR_CPU_SLEEP_0
&PWR_CPU_SLEEP_1
&PWR_CLUSTER_SLEEP_0
&PWR_CLUSTER_SLEEP_1
&PWR_CLUSTER_SLEEP_2>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
CPU7: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
cpu-idle-states = <&PWR_CPU_SLEEP_0
&PWR_CPU_SLEEP_1
&PWR_CLUSTER_SLEEP_0
&PWR_CLUSTER_SLEEP_1
&PWR_CLUSTER_SLEEP_2>;
capacity-dmips-mhz = <1024>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU4>;
};
core1 {
cpu = <&CPU5>;
};
core2 {
cpu = <&CPU6>;
};
core3 {
cpu = <&CPU7>;
};
};
cluster1 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
};
idle-states {
entry-method = "psci";
PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
idle-state-name = "pwr-retention";
arm,psci-suspend-param = <0x40000002>;
entry-latency-us = <338>;
exit-latency-us = <423>;
min-residency-us = <200>;
};
PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
compatible = "arm,idle-state";
idle-state-name = "pwr-power-collapse";
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <515>;
exit-latency-us = <1821>;
min-residency-us = <1000>;
local-timer-stop;
};
PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
idle-state-name = "perf-retention";
arm,psci-suspend-param = <0x40000002>;
entry-latency-us = <154>;
exit-latency-us = <87>;
min-residency-us = <200>;
};
PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
compatible = "arm,idle-state";
idle-state-name = "perf-power-collapse";
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <262>;
exit-latency-us = <301>;
min-residency-us = <1000>;
local-timer-stop;
};
PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
compatible = "arm,idle-state";
idle-state-name = "pwr-cluster-dynamic-retention";
arm,psci-suspend-param = <0x400000F2>;
entry-latency-us = <284>;
exit-latency-us = <384>;
min-residency-us = <9987>;
local-timer-stop;
};
PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
compatible = "arm,idle-state";
idle-state-name = "pwr-cluster-retention";
arm,psci-suspend-param = <0x400000F3>;
entry-latency-us = <338>;
exit-latency-us = <423>;
min-residency-us = <9987>;
local-timer-stop;
};
PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
compatible = "arm,idle-state";
idle-state-name = "pwr-cluster-retention";
arm,psci-suspend-param = <0x400000F4>;
entry-latency-us = <515>;
exit-latency-us = <1821>;
min-residency-us = <9987>;
local-timer-stop;
};
PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
compatible = "arm,idle-state";
idle-state-name = "perf-cluster-dynamic-retention";
arm,psci-suspend-param = <0x400000F2>;
entry-latency-us = <272>;
exit-latency-us = <329>;
min-residency-us = <9987>;
local-timer-stop;
};
PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
compatible = "arm,idle-state";
idle-state-name = "perf-cluster-retention";
arm,psci-suspend-param = <0x400000F3>;
entry-latency-us = <332>;
exit-latency-us = <368>;
min-residency-us = <9987>;
local-timer-stop;
};
PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
compatible = "arm,idle-state";
idle-state-name = "perf-cluster-retention";
arm,psci-suspend-param = <0x400000F4>;
entry-latency-us = <545>;
exit-latency-us = <1609>;
min-residency-us = <9987>;
local-timer-stop;
};
};
};
firmware {
scm {
compatible = "qcom,scm-msm8998", "qcom,scm";
};
};
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0x0 0x80000000 0x0 0x0>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
wlan_msa_guard: wlan-msa-guard@85600000 {
reg = <0x0 0x85600000 0x0 0x100000>;
no-map;
};
wlan_msa_mem: wlan-msa-mem@85700000 {
reg = <0x0 0x85700000 0x0 0x100000>;
no-map;
};
qhee_code: qhee-code@85800000 {
reg = <0x0 0x85800000 0x0 0x600000>;
no-map;
};
rmtfs_mem: memory@85e00000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0x85e00000 0x0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <15>;
};
smem_region: smem-mem@86000000 {
reg = <0 0x86000000 0 0x200000>;
no-map;
};
tz_mem: memory@86200000 {
reg = <0x0 0x86200000 0x0 0x3300000>;
no-map;
};
mpss_region: mpss@8ac00000 {
reg = <0x0 0x8ac00000 0x0 0x7e00000>;
no-map;
};
adsp_region: adsp@92a00000 {
reg = <0x0 0x92a00000 0x0 0x1e00000>;
no-map;
};
mba_region: mba@94800000 {
reg = <0x0 0x94800000 0x0 0x200000>;
no-map;
};
buffer_mem: tzbuffer@94a00000 {
reg = <0x0 0x94a00000 0x0 0x100000>;
no-map;
};
venus_region: venus@9f800000 {
reg = <0x0 0x9f800000 0x0 0x800000>;
no-map;
};
adsp_mem: adsp-region@f6000000 {
reg = <0x0 0xf6000000 0x0 0x800000>;
no-map;
};
qseecom_mem: qseecom-region@f6800000 {
reg = <0x0 0xf6800000 0x0 0x1400000>;
no-map;
};
zap_shader_region: gpu@fed00000 {
compatible = "shared-dma-pool";
reg = <0x0 0xfed00000 0x0 0xa00000>;
no-map;
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sdm660";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,sdm660-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
};
};
};
};
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
hwlocks = <&tcsr_mutex 3>;
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sdm630";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x00100000 0x94000>;
clock-names = "xo", "sleep_clk";
clocks = <&xo_board>,
<&sleep_clk>;
};
rpm_msg_ram: sram@778000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00778000 0x7000>;
};
qfprom: qfprom@780000 {
compatible = "qcom,sdm630-qfprom", "qcom,qfprom";
reg = <0x00780000 0x621c>;
#address-cells = <1>;
#size-cells = <1>;
qusb2_hstx_trim: hstx-trim@240 {
reg = <0x243 0x1>;
bits = <1 3>;
};
gpu_speed_bin: gpu-speed-bin@41a0 {
reg = <0x41a2 0x1>;
bits = <5 7>;
};
};
rng: rng@793000 {
compatible = "qcom,prng-ee";
reg = <0x00793000 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
bimc: interconnect@1008000 {
compatible = "qcom,sdm660-bimc";
reg = <0x01008000 0x78000>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
<&rpmcc RPM_SMD_BIMC_A_CLK>;
};
restart@10ac000 {
compatible = "qcom,pshold";
reg = <0x010ac000 0x4>;
};
cnoc: interconnect@1500000 {
compatible = "qcom,sdm660-cnoc";
reg = <0x01500000 0x10000>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
<&rpmcc RPM_SMD_CNOC_A_CLK>;
};
snoc: interconnect@1626000 {
compatible = "qcom,sdm660-snoc";
reg = <0x01626000 0x7090>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
<&rpmcc RPM_SMD_SNOC_A_CLK>;
};
anoc2_smmu: iommu@16c0000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x016c0000 0x40000>;
assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
assigned-clock-rates = <1000>;
clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
clock-names = "bus";
#global-interrupts = <2>;
#iommu-cells = <1>;
interrupts =
<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
a2noc: interconnect@1704000 {
compatible = "qcom,sdm660-a2noc";
reg = <0x01704000 0xc100>;
#interconnect-cells = <1>;
clock-names = "bus",
"bus_a",
"ipa",
"ufs_axi",
"aggre2_ufs_axi",
"aggre2_usb3_axi",
"cfg_noc_usb2_axi";
clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
<&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
<&rpmcc RPM_SMD_IPA_CLK>,
<&gcc GCC_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
<&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
};
mnoc: interconnect@1745000 {
compatible = "qcom,sdm660-mnoc";
reg = <0x01745000 0xa010>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a", "iface";
clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
<&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
<&mmcc AHB_CLK_SRC>;
};
tsens: thermal-sensor@10ae000 {
compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
reg = <0x010ae000 0x1000>, /* TM */
<0x010ad000 0x1000>; /* SROT */
#qcom,sensors = <12>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x20000>;
#hwlock-cells = <1>;
};
tcsr_regs_1: syscon@1f60000 {
compatible = "qcom,sdm630-tcsr", "syscon";
reg = <0x01f60000 0x20000>;
};
tlmm: pinctrl@3100000 {
compatible = "qcom,sdm630-pinctrl";
reg = <0x03100000 0x400000>,
<0x03500000 0x400000>,
<0x03900000 0x400000>;
reg-names = "south", "center", "north";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 114>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
blsp1_uart1_default: blsp1-uart1-default-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "blsp_uart1";
drive-strength = <2>;
bias-disable;
};
blsp1_uart1_sleep: blsp1-uart1-sleep-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
blsp1_uart2_default: blsp1-uart2-default-state {
pins = "gpio4", "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-disable;
};
blsp2_uart1_default: blsp2-uart1-active-state {
tx-rts-pins {
pins = "gpio16", "gpio19";
function = "blsp_uart5";
drive-strength = <2>;
bias-disable;
};
rx-pins {
/*
* Avoid garbage data while BT module
* is powered off or not driving signal
*/
pins = "gpio17";
function = "blsp_uart5";
drive-strength = <2>;
bias-pull-up;
};
cts-pins {
/* Match the pull of the BT module */
pins = "gpio18";
function = "blsp_uart5";
drive-strength = <2>;
bias-pull-down;
};
};
blsp2_uart1_sleep: blsp2-uart1-sleep-state {
tx-pins {
pins = "gpio16";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
rx-cts-rts-pins {
pins = "gpio17", "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
i2c1_default: i2c1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
i2c1_sleep: i2c1-sleep-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-pull-up;
};
i2c2_default: i2c2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
i2c2_sleep: i2c2-sleep-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-pull-up;
};
i2c3_default: i2c3-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
i2c3_sleep: i2c3-sleep-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-pull-up;
};
i2c4_default: i2c4-default-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
i2c4_sleep: i2c4-sleep-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-pull-up;
};
i2c5_default: i2c5-default-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
i2c5_sleep: i2c5-sleep-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-pull-up;
};
i2c6_default: i2c6-default-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
i2c6_sleep: i2c6-sleep-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-pull-up;
};
i2c7_default: i2c7-default-state {
pins = "gpio26", "gpio27";
function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
i2c7_sleep: i2c7-sleep-state {
pins = "gpio26", "gpio27";
function = "blsp_i2c7";
drive-strength = <2>;
bias-pull-up;
};
i2c8_default: i2c8-default-state {
pins = "gpio30", "gpio31";
function = "blsp_i2c8_a";
drive-strength = <2>;
bias-disable;
};
i2c8_sleep: i2c8-sleep-state {
pins = "gpio30", "gpio31";
function = "blsp_i2c8_a";
drive-strength = <2>;
bias-pull-up;
};
cci0_default: cci0-default-state {
pins = "gpio36","gpio37";
function = "cci_i2c";
bias-pull-up;
drive-strength = <2>;
};
cci1_default: cci1-default-state {
pins = "gpio38","gpio39";
function = "cci_i2c";
bias-pull-up;
drive-strength = <2>;
};
sdc1_state_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc1_state_off: sdc1-off-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc2_state_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
};
sdc2_state_off: sdc2-off-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
};
};
adreno_gpu: gpu@5000000 {
compatible = "qcom,adreno-508.0", "qcom,adreno";
reg = <0x05000000 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gpucc GPUCC_RBBMTIMER_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_GPU_BIMC_GFX_CLK>,
<&gpucc GPUCC_RBCPR_CLK>,
<&gpucc GPUCC_GFX3D_CLK>;
clock-names = "iface",
"rbbmtimer",
"mem",
"mem_iface",
"rbcpr",
"core";
power-domains = <&rpmpd SDM660_VDDMX>;
iommus = <&kgsl_smmu 0>;
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
interconnect-names = "gfx-mem";
operating-points-v2 = <&gpu_sdm630_opp_table>;
status = "disabled";
gpu_sdm630_opp_table: opp-table {
compatible = "operating-points-v2";
opp-775000000 {
opp-hz = /bits/ 64 <775000000>;
opp-level = <RPM_SMD_LEVEL_TURBO>;
opp-peak-kBps = <5412000>;
opp-supported-hw = <0xa2>;
};
opp-647000000 {
opp-hz = /bits/ 64 <647000000>;
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
opp-peak-kBps = <4068000>;
opp-supported-hw = <0xff>;
};
opp-588000000 {
opp-hz = /bits/ 64 <588000000>;
opp-level = <RPM_SMD_LEVEL_NOM>;
opp-peak-kBps = <3072000>;
opp-supported-hw = <0xff>;
};
opp-465000000 {
opp-hz = /bits/ 64 <465000000>;
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
opp-peak-kBps = <2724000>;
opp-supported-hw = <0xff>;
};
opp-370000000 {
opp-hz = /bits/ 64 <370000000>;
opp-level = <RPM_SMD_LEVEL_SVS>;
opp-peak-kBps = <2188000>;
opp-supported-hw = <0xff>;
};
opp-240000000 {
opp-hz = /bits/ 64 <240000000>;
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
opp-peak-kBps = <1648000>;
opp-supported-hw = <0xff>;
};
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
opp-peak-kBps = <1200000>;
opp-supported-hw = <0xff>;
};
};
};
kgsl_smmu: iommu@5040000 {
compatible = "qcom,sdm630-smmu-v2",
"qcom,adreno-smmu", "qcom,smmu-v2";
reg = <0x05040000 0x10000>;
/*
* GX GDSC parent is CX. We need to bring up CX for SMMU
* but we need both up for Adreno. On the other hand, we
* need to manage the GX rpmpd domain in the adreno driver.
* Enable CX/GX GDSCs here so that we can manage just the GX
* RPM Power Domain in the Adreno driver.
*/
power-domains = <&gpucc GPU_GX_GDSC>;
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_GPU_BIMC_GFX_CLK>;
clock-names = "iface", "mem", "mem_iface";
#global-interrupts = <2>;
#iommu-cells = <1>;
interrupts =
<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
gpucc: clock-controller@5065000 {
compatible = "qcom,gpucc-sdm630";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x05065000 0x9038>;
clocks = <&xo_board>,
<&gcc GCC_GPU_GPLL0_CLK>,
<&gcc GCC_GPU_GPLL0_DIV_CLK>;
clock-names = "xo",
"gcc_gpu_gpll0_clk",
"gcc_gpu_gpll0_div_clk";
status = "disabled";
};
lpass_smmu: iommu@5100000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x05100000 0x40000>;
#iommu-cells = <1>;
#global-interrupts = <2>;
interrupts =
<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sram@290000 {
compatible = "qcom,rpm-stats";
reg = <0x00290000 0x10000>;
};
spmi_bus: spmi@800f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0800f000 0x1000>,
<0x08400000 0x1000000>,
<0x09400000 0x1000000>,
<0x0a400000 0x220000>,
<0x0800a000 0x3000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
cell-index = <0>;
};
usb3: usb@a8f8800 {
compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
reg = <0x0a8f8800 0x400>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
<&gcc GCC_USB30_MOCK_UTMI_CLK>,
<&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi",
"bus";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
<&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
assigned-clock-rates = <19200000>, <120000000>,
<19200000>;
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq";
power-domains = <&gcc USB_30_GDSC>;
qcom,select-utmi-as-pipe-clk;
resets = <&gcc GCC_USB_30_BCR>;
usb3_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0x0a800000 0xc8d0>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
/*
* SDM630 technically supports USB3 but I
* haven't seen any devices making use of it.
*/
maximum-speed = "high-speed";
phys = <&qusb2phy0>;
phy-names = "usb2-phy";
snps,hird-threshold = /bits/ 8 <0>;
};
};
qusb2phy0: phy@c012000 {
compatible = "qcom,sdm660-qusb2-phy";
reg = <0x0c012000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_RX0_USB2_CLKREF_CLK>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
nvmem-cells = <&qusb2_hstx_trim>;
status = "disabled";
};
qusb2phy1: phy@c014000 {
compatible = "qcom,sdm660-qusb2-phy";
reg = <0x0c014000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_RX1_USB2_CLKREF_CLK>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
nvmem-cells = <&qusb2_hstx_trim>;
status = "disabled";
};
sdhc_2: mmc@c084000 {
compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0c084000 0x1000>;
reg-names = "hc";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
bus-width = <4>;
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
interconnects = <&a2noc 3 &a2noc 10>,
<&gnoc 0 &cnoc 28>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
operating-points-v2 = <&sdhc2_opp_table>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_state_on>;
pinctrl-1 = <&sdc2_state_off>;
power-domains = <&rpmpd SDM660_VDDCX>;
status = "disabled";
sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmpd_opp_low_svs>;
opp-peak-kBps = <200000 140000>;
opp-avg-kBps = <130718 133320>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmpd_opp_svs>;
opp-peak-kBps = <250000 160000>;
opp-avg-kBps = <196078 150000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmpd_opp_nom>;
opp-peak-kBps = <4096000 4096000>;
opp-avg-kBps = <1338562 1338562>;
};
};
};
sdhc_1: mmc@c0c4000 {
compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0c0c4000 0x1000>,
<0x0c0c5000 0x1000>,
<0x0c0c8000 0x8000>;
reg-names = "hc", "cqhci", "ice";
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>,
<&gcc GCC_SDCC1_ICE_CORE_CLK>;
clock-names = "iface", "core", "xo", "ice";
interconnects = <&a2noc 2 &a2noc 10>,
<&gnoc 0 &cnoc 27>;
interconnect-names = "sdhc-ddr", "cpu-sdhc";
operating-points-v2 = <&sdhc1_opp_table>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_state_on>;
pinctrl-1 = <&sdc1_state_off>;
power-domains = <&rpmpd SDM660_VDDCX>;
bus-width = <8>;
non-removable;
status = "disabled";
sdhc1_opp_table: opp-table {
compatible = "operating-points-v2";
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmpd_opp_low_svs>;
opp-peak-kBps = <200000 140000>;
opp-avg-kBps = <130718 133320>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmpd_opp_svs>;
opp-peak-kBps = <250000 160000>;
opp-avg-kBps = <196078 150000>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
required-opps = <&rpmpd_opp_nom>;
opp-peak-kBps = <4096000 4096000>;
opp-avg-kBps = <1338562 1338562>;
};
};
};
usb2: usb@c2f8800 {
compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
reg = <0x0c2f8800 0x400>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>,
<&gcc GCC_USB20_MASTER_CLK>,
<&gcc GCC_USB20_MOCK_UTMI_CLK>,
<&gcc GCC_USB20_SLEEP_CLK>;
clock-names = "cfg_noc", "core",
"mock_utmi", "sleep";
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
<&gcc GCC_USB20_MASTER_CLK>;
assigned-clock-rates = <19200000>, <60000000>;
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq";
qcom,select-utmi-as-pipe-clk;
resets = <&gcc GCC_USB_20_BCR>;
usb2_dwc3: usb@c200000 {
compatible = "snps,dwc3";
reg = <0x0c200000 0xc8d0>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
/* This is the HS-only host */
maximum-speed = "high-speed";
phys = <&qusb2phy1>;
phy-names = "usb2-phy";
snps,hird-threshold = /bits/ 8 <0>;
};
};
mmcc: clock-controller@c8c0000 {
compatible = "qcom,mmcc-sdm630";
reg = <0x0c8c0000 0x40000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clock-names = "xo",
"sleep_clk",
"gpll0",
"gpll0_div",
"dsi0pll",
"dsi0pllbyte",
"dsi1pll",
"dsi1pllbyte",
"dp_link_2x_clk_divsel_five",
"dp_vco_divided_clk_src_mux";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep_clk>,
<&gcc GCC_MMSS_GPLL0_CLK>,
<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
<&dsi0_phy 1>,
<&dsi0_phy 0>,
<0>,
<0>,
<0>,
<0>;
};
dsi_opp_table: opp-table-dsi {
compatible = "operating-points-v2";
opp-131250000 {
opp-hz = /bits/ 64 <131250000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-210000000 {
opp-hz = /bits/ 64 <210000000>;
required-opps = <&rpmpd_opp_svs_plus>;
};
opp-262500000 {
opp-hz = /bits/ 64 <262500000>;
required-opps = <&rpmpd_opp_nom>;
};
};
mdss: display-subsystem@c900000 {
compatible = "qcom,mdss";
reg = <0x0c900000 0x1000>,
<0x0c9b0000 0x1040>;
reg-names = "mdss_phys", "vbif_phys";
power-domains = <&mmcc MDSS_GDSC>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_VSYNC_CLK>,
<&mmcc MDSS_MDP_CLK>;
clock-names = "iface",
"bus",
"vsync",
"core";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
mdp: display-controller@c901000 {
compatible = "qcom,sdm630-mdp5", "qcom,mdp5";
reg = <0x0c901000 0x89000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
interrupts = <0>;
assigned-clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
assigned-clock-rates = <300000000>,
<19200000>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
clock-names = "iface",
"bus",
"core",
"vsync";
interconnects = <&mnoc 2 &bimc 5>,
<&mnoc 3 &bimc 5>,
<&gnoc 0 &mnoc 17>;
interconnect-names = "mdp0-mem",
"mdp1-mem",
"rotator-mem";
iommus = <&mmss_smmu 0>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmpd SDM660_VDDCX>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdp5_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
};
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-150000000 {
opp-hz = /bits/ 64 <150000000>;
opp-peak-kBps = <320000 320000 76800>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
opp-peak-kBps = <6400000 6400000 160000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <6400000 6400000 190000>;
required-opps = <&rpmpd_opp_svs_plus>;
};
opp-330000000 {
opp-hz = /bits/ 64 <330000000>;
opp-peak-kBps = <6400000 6400000 240000>;
required-opps = <&rpmpd_opp_nom>;
};
opp-412500000 {
opp-hz = /bits/ 64 <412500000>;
opp-peak-kBps = <6400000 6400000 320000>;
required-opps = <&rpmpd_opp_turbo>;
};
};
};
dsi0: dsi@c994000 {
compatible = "qcom,sdm660-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0x0c994000 0x400>;
reg-names = "dsi_ctrl";
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmpd SDM660_VDDCX>;
interrupt-parent = <&mdss>;
interrupts = <4>;
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
<&mmcc PCLK0_CLK_SRC>;
assigned-clock-parents = <&dsi0_phy 0>,
<&dsi0_phy 1>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_BYTE0_INTF_CLK>,
<&mmcc MNOC_AHB_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MISC_AHB_CLK>,
<&mmcc MDSS_PCLK0_CLK>,
<&mmcc MDSS_ESC0_CLK>;
clock-names = "mdp_core",
"byte",
"byte_intf",
"mnoc",
"iface",
"bus",
"core_mmss",
"pixel",
"core";
phys = <&dsi0_phy>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&mdp5_intf1_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
};
};
};
};
dsi0_phy: phy@c994400 {
compatible = "qcom,dsi-phy-14nm-660";
reg = <0x0c994400 0x100>,
<0x0c994500 0x300>,
<0x0c994800 0x188>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
clock-names = "iface", "ref";
status = "disabled";
};
};
blsp1_dma: dma-controller@c144000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0c144000 0x1f000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
num-channels = <18>;
qcom,num-ees = <4>;
};
blsp1_uart1: serial@c16f000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0c16f000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart1_default>;
pinctrl-1 = <&blsp1_uart1_sleep>;
status = "disabled";
};
blsp1_uart2: serial@c170000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0c170000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_default>;
status = "disabled";
};
blsp_i2c1: i2c@c175000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c175000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_default>;
pinctrl-1 = <&i2c1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c2: i2c@c176000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c176000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c2_default>;
pinctrl-1 = <&i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c3: i2c@c177000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c177000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c3_default>;
pinctrl-1 = <&i2c3_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c4: i2c@c178000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c178000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_default>;
pinctrl-1 = <&i2c4_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp2_dma: dma-controller@c184000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0c184000 0x1f000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
num-channels = <18>;
qcom,num-ees = <4>;
};
blsp2_uart1: serial@c1af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0c1af000 0x200>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart1_default>;
pinctrl-1 = <&blsp2_uart1_sleep>;
status = "disabled";
};
blsp_i2c5: i2c@c1b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b5000 0x600>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c5_default>;
pinctrl-1 = <&i2c5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c6: i2c@c1b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b6000 0x600>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c6_default>;
pinctrl-1 = <&i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c7: i2c@c1b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b7000 0x600>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c7_default>;
pinctrl-1 = <&i2c7_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c8: i2c@c1b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b8000 0x600>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c8_default>;
pinctrl-1 = <&i2c8_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sram@146bf000 {
compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
reg = <0x146bf000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x146bf000 0x1000>;
pil-reloc@94c {
compatible = "qcom,pil-reloc-info";
reg = <0x94c 0xc8>;
};
};
camss: camss@ca00000 {
compatible = "qcom,sdm660-camss";
reg = <0x0ca00020 0x10>,
<0x0ca30000 0x100>,
<0x0ca30400 0x100>,
<0x0ca30800 0x100>,
<0x0ca30c00 0x100>,
<0x0c824000 0x1000>,
<0x0ca00120 0x4>,
<0x0c825000 0x1000>,
<0x0ca00124 0x4>,
<0x0c826000 0x1000>,
<0x0ca00128 0x4>,
<0x0ca31000 0x500>,
<0x0ca10000 0x1000>,
<0x0ca14000 0x1000>;
reg-names = "csi_clk_mux",
"csid0",
"csid1",
"csid2",
"csid3",
"csiphy0",
"csiphy0_clk_mux",
"csiphy1",
"csiphy1_clk_mux",
"csiphy2",
"csiphy2_clk_mux",
"ispif",
"vfe0",
"vfe1";
interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "csid0",
"csid1",
"csid2",
"csid3",
"csiphy0",
"csiphy1",
"csiphy2",
"ispif",
"vfe0",
"vfe1";
clocks = <&mmcc CAMSS_AHB_CLK>,
<&mmcc CAMSS_CPHY_CSID0_CLK>,
<&mmcc CAMSS_CPHY_CSID1_CLK>,
<&mmcc CAMSS_CPHY_CSID2_CLK>,
<&mmcc CAMSS_CPHY_CSID3_CLK>,
<&mmcc CAMSS_CSI0_AHB_CLK>,
<&mmcc CAMSS_CSI0_CLK>,
<&mmcc CAMSS_CPHY_CSID0_CLK>,
<&mmcc CAMSS_CSI0PIX_CLK>,
<&mmcc CAMSS_CSI0RDI_CLK>,
<&mmcc CAMSS_CSI1_AHB_CLK>,
<&mmcc CAMSS_CSI1_CLK>,
<&mmcc CAMSS_CPHY_CSID1_CLK>,
<&mmcc CAMSS_CSI1PIX_CLK>,
<&mmcc CAMSS_CSI1RDI_CLK>,
<&mmcc CAMSS_CSI2_AHB_CLK>,
<&mmcc CAMSS_CSI2_CLK>,
<&mmcc CAMSS_CPHY_CSID2_CLK>,
<&mmcc CAMSS_CSI2PIX_CLK>,
<&mmcc CAMSS_CSI2RDI_CLK>,
<&mmcc CAMSS_CSI3_AHB_CLK>,
<&mmcc CAMSS_CSI3_CLK>,
<&mmcc CAMSS_CPHY_CSID3_CLK>,
<&mmcc CAMSS_CSI3PIX_CLK>,
<&mmcc CAMSS_CSI3RDI_CLK>,
<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
<&mmcc CSIPHY_AHB2CRIF_CLK>,
<&mmcc CAMSS_CSI_VFE0_CLK>,
<&mmcc CAMSS_CSI_VFE1_CLK>,
<&mmcc CAMSS_ISPIF_AHB_CLK>,
<&mmcc THROTTLE_CAMSS_AXI_CLK>,
<&mmcc CAMSS_TOP_AHB_CLK>,
<&mmcc CAMSS_VFE0_AHB_CLK>,
<&mmcc CAMSS_VFE0_CLK>,
<&mmcc CAMSS_VFE0_STREAM_CLK>,
<&mmcc CAMSS_VFE1_AHB_CLK>,
<&mmcc CAMSS_VFE1_CLK>,
<&mmcc CAMSS_VFE1_STREAM_CLK>,
<&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
<&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
clock-names = "ahb",
"cphy_csid0",
"cphy_csid1",
"cphy_csid2",
"cphy_csid3",
"csi0_ahb",
"csi0",
"csi0_phy",
"csi0_pix",
"csi0_rdi",
"csi1_ahb",
"csi1",
"csi1_phy",
"csi1_pix",
"csi1_rdi",
"csi2_ahb",
"csi2",
"csi2_phy",
"csi2_pix",
"csi2_rdi",
"csi3_ahb",
"csi3",
"csi3_phy",
"csi3_pix",
"csi3_rdi",
"csiphy0_timer",
"csiphy1_timer",
"csiphy2_timer",
"csiphy_ahb2crif",
"csi_vfe0",
"csi_vfe1",
"ispif_ahb",
"throttle_axi",
"top_ahb",
"vfe0_ahb",
"vfe0",
"vfe0_stream",
"vfe1_ahb",
"vfe1",
"vfe1_stream",
"vfe_ahb",
"vfe_axi";
interconnects = <&mnoc 5 &bimc 5>;
interconnect-names = "vfe-mem";
iommus = <&mmss_smmu 0xc00>,
<&mmss_smmu 0xc01>,
<&mmss_smmu 0xc02>,
<&mmss_smmu 0xc03>;
power-domains = <&mmcc CAMSS_VFE0_GDSC>,
<&mmcc CAMSS_VFE1_GDSC>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
};
};
cci: cci@ca0c000 {
compatible = "qcom,msm8996-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0ca0c000 0x1000>;
interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
<&mmcc CAMSS_CCI_CLK>;
assigned-clock-rates = <80800000>, <37500000>;
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
<&mmcc CAMSS_CCI_AHB_CLK>,
<&mmcc CAMSS_CCI_CLK>,
<&mmcc CAMSS_AHB_CLK>;
clock-names = "camss_top_ahb",
"cci_ahb",
"cci",
"camss_ahb";
pinctrl-names = "default";
pinctrl-0 = <&cci0_default &cci1_default>;
power-domains = <&mmcc CAMSS_TOP_GDSC>;
status = "disabled";
cci_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
};
cci_i2c1: i2c-bus@1 {
reg = <1>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
venus: video-codec@cc00000 {
compatible = "qcom,sdm660-venus";
reg = <0x0cc00000 0xff000>;
clocks = <&mmcc VIDEO_CORE_CLK>,
<&mmcc VIDEO_AHB_CLK>,
<&mmcc VIDEO_AXI_CLK>,
<&mmcc THROTTLE_VIDEO_AXI_CLK>;
clock-names = "core", "iface", "bus", "bus_throttle";
interconnects = <&gnoc 0 &mnoc 13>,
<&mnoc 4 &bimc 5>;
interconnect-names = "cpu-cfg", "video-mem";
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&mmss_smmu 0x400>,
<&mmss_smmu 0x401>,
<&mmss_smmu 0x40a>,
<&mmss_smmu 0x407>,
<&mmss_smmu 0x40e>,
<&mmss_smmu 0x40f>,
<&mmss_smmu 0x408>,
<&mmss_smmu 0x409>,
<&mmss_smmu 0x40b>,
<&mmss_smmu 0x40c>,
<&mmss_smmu 0x40d>,
<&mmss_smmu 0x410>,
<&mmss_smmu 0x421>,
<&mmss_smmu 0x428>,
<&mmss_smmu 0x429>,
<&mmss_smmu 0x42b>,
<&mmss_smmu 0x42c>,
<&mmss_smmu 0x42d>,
<&mmss_smmu 0x411>,
<&mmss_smmu 0x431>;
memory-region = <&venus_region>;
power-domains = <&mmcc VENUS_GDSC>;
status = "disabled";
video-decoder {
compatible = "venus-decoder";
clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
clock-names = "vcodec0_core";
power-domains = <&mmcc VENUS_CORE0_GDSC>;
};
video-encoder {
compatible = "venus-encoder";
clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
clock-names = "vcodec0_core";
power-domains = <&mmcc VENUS_CORE0_GDSC>;
};
};
mmss_smmu: iommu@cd00000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x0cd00000 0x40000>;
clocks = <&mmcc MNOC_AHB_CLK>,
<&mmcc BIMC_SMMU_AHB_CLK>,
<&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
<&mmcc BIMC_SMMU_AXI_CLK>;
clock-names = "iface-mm", "iface-smmu",
"bus-mm", "bus-smmu";
#global-interrupts = <2>;
#iommu-cells = <1>;
interrupts =
<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
adsp_pil: remoteproc@15700000 {
compatible = "qcom,sdm660-adsp-pas";
reg = <0x15700000 0x4040>;
interrupts-extended =
<&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
memory-region = <&adsp_region>;
power-domains = <&rpmpd SDM660_VDDCX>;
power-domain-names = "cx";
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
glink-edge {
interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
mboxes = <&apcs_glb 9>;
qcom,remote-pid = <2>;
apr {
compatible = "qcom,apr-v2";
qcom,glink-channels = "apr_audio_svc";
qcom,domain = <APR_DOMAIN_ADSP>;
#address-cells = <1>;
#size-cells = <0>;
service@3 {
reg = <APR_SVC_ADSP_CORE>;
compatible = "qcom,q6core";
};
q6afe: service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
q6afedai: dais {
compatible = "qcom,q6afe-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
};
};
q6asm: service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#address-cells = <1>;
#size-cells = <0>;
#sound-dai-cells = <1>;
iommus = <&lpass_smmu 1>;
};
};
q6adm: service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
q6routing: routing {
compatible = "qcom,q6adm-routing";
#sound-dai-cells = <0>;
};
};
};
};
};
gnoc: interconnect@17900000 {
compatible = "qcom,sdm660-gnoc";
reg = <0x17900000 0xe000>;
#interconnect-cells = <1>;
/*
* This one apparently features no clocks,
* so let's not mess with the driver needlessly
*/
clock-names = "bus", "bus_a";
clocks = <&xo_board>, <&xo_board>;
};
apcs_glb: mailbox@17911000 {
compatible = "qcom,sdm660-apcs-hmss-global";
reg = <0x17911000 0x1000>;
#mbox-cells = <1>;
};
timer@17920000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x17920000 0x1000>;
clock-frequency = <19200000>;
frame@17921000 {
frame-number = <0>;
interrupts = <0 8 0x4>,
<0 7 0x4>;
reg = <0x17921000 0x1000>,
<0x17922000 0x1000>;
};
frame@17923000 {
frame-number = <1>;
interrupts = <0 9 0x4>;
reg = <0x17923000 0x1000>;
status = "disabled";
};
frame@17924000 {
frame-number = <2>;
interrupts = <0 10 0x4>;
reg = <0x17924000 0x1000>;
status = "disabled";
};
frame@17925000 {
frame-number = <3>;
interrupts = <0 11 0x4>;
reg = <0x17925000 0x1000>;
status = "disabled";
};
frame@17926000 {
frame-number = <4>;
interrupts = <0 12 0x4>;
reg = <0x17926000 0x1000>;
status = "disabled";
};
frame@17927000 {
frame-number = <5>;
interrupts = <0 13 0x4>;
reg = <0x17927000 0x1000>;
status = "disabled";
};
frame@17928000 {
frame-number = <6>;
interrupts = <0 14 0x4>;
reg = <0x17928000 0x1000>;
status = "disabled";
};
};
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
reg = <0x17a00000 0x10000>, /* GICD */
<0x17b00000 0x100000>; /* GICR * 8 */
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-controller;
#redistributor-regions = <1>;
redistributor-stride = <0x0 0x20000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
};
sound: sound {
};
thermal-zones {
aoss-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 0>;
trips {
aoss_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <1000>;
type = "hot";
};
};
};
cpuss0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 1>;
trips {
cpuss0_alert0: trip-point0 {
temperature = <125000>;
hysteresis = <1000>;
type = "hot";
};
};
};
cpuss1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 2>;
trips {
cpuss1_alert0: trip-point0 {
temperature = <125000>;
hysteresis = <1000>;
type = "hot";
};
};
};
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 3>;
trips {
cpu0_alert0: trip-point0 {
temperature = <70000>;
hysteresis = <1000>;
type = "passive";
};
cpu0_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
trips {
cpu1_alert0: trip-point0 {
temperature = <70000>;
hysteresis = <1000>;
type = "passive";
};
cpu1_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
cpu2_alert0: trip-point0 {
temperature = <70000>;
hysteresis = <1000>;
type = "passive";
};
cpu2_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 6>;
trips {
cpu3_alert0: trip-point0 {
temperature = <70000>;
hysteresis = <1000>;
type = "passive";
};
cpu3_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
/*
* According to what downstream DTS says,
* the entire power efficient cluster has
* only a single thermal sensor.
*/
pwr-cluster-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 7>;
trips {
pwr_cluster_alert0: trip-point0 {
temperature = <70000>;
hysteresis = <1000>;
type = "passive";
};
pwr_cluster_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
gpu-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 8>;
trips {
gpu_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <1000>;
type = "hot";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 0xf08>,
<GIC_PPI 2 0xf08>,
<GIC_PPI 3 0xf08>,
<GIC_PPI 0 0xf08>;
};
};