789 lines
14 KiB
Plaintext
789 lines
14 KiB
Plaintext
|
// SPDX-License-Identifier: BSD-3-Clause
|
||
|
|
/*
|
||
|
|
* Lenovo Yoga C630
|
||
|
|
*
|
||
|
|
* Copyright (c) 2019, Linaro Ltd.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
|
||
|
|
#include <dt-bindings/input/gpio-keys.h>
|
||
|
|
#include <dt-bindings/input/input.h>
|
||
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||
|
|
#include <dt-bindings/sound/qcom,q6afe.h>
|
||
|
|
#include <dt-bindings/sound/qcom,q6asm.h>
|
||
|
|
#include "sdm850.dtsi"
|
||
|
|
#include "sdm845-wcd9340.dtsi"
|
||
|
|
#include "pm8998.dtsi"
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Update following upstream (sdm845.dtsi) reserved
|
||
|
|
* memory mappings for firmware loading to succeed
|
||
|
|
* and enable the IPA device.
|
||
|
|
*/
|
||
|
|
/delete-node/ &ipa_fw_mem;
|
||
|
|
/delete-node/ &ipa_gsi_mem;
|
||
|
|
/delete-node/ &gpu_mem;
|
||
|
|
/delete-node/ &adsp_mem;
|
||
|
|
/delete-node/ &wlan_msa_mem;
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "Lenovo Yoga C630";
|
||
|
|
compatible = "lenovo,yoga-c630", "qcom,sdm845";
|
||
|
|
chassis-type = "convertible";
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
hsuart0 = &uart6;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio-keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
|
||
|
|
|
||
|
|
switch-lid {
|
||
|
|
gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,input-type = <EV_SW>;
|
||
|
|
linux,code = <SW_LID>;
|
||
|
|
wakeup-source;
|
||
|
|
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
||
|
|
};
|
||
|
|
|
||
|
|
switch-mode {
|
||
|
|
gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,input-type = <EV_SW>;
|
||
|
|
linux,code = <SW_TABLET_MODE>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Reserved memory changes for IPA */
|
||
|
|
reserved-memory {
|
||
|
|
wlan_msa_mem: memory@8c400000 {
|
||
|
|
reg = <0 0x8c400000 0 0x100000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpu_mem: memory@8c515000 {
|
||
|
|
reg = <0 0x8c515000 0 0x2000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
ipa_fw_mem: memory@8c517000 {
|
||
|
|
reg = <0 0x8c517000 0 0x5a000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
|
||
|
|
adsp_mem: memory@8c600000 {
|
||
|
|
reg = <0 0x8c600000 0 0x1a00000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sn65dsi86_refclk: sn65dsi86-refclk {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
|
||
|
|
clock-frequency = <19200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
backlight: backlight {
|
||
|
|
compatible = "pwm-backlight";
|
||
|
|
pwms = <&sn65dsi86 1000000>;
|
||
|
|
enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&adsp_pas {
|
||
|
|
firmware-name = "qcom/sdm850/LENOVO/81JL/qcadsp850.mbn";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&apps_rsc {
|
||
|
|
regulators-0 {
|
||
|
|
compatible = "qcom,pm8998-rpmh-regulators";
|
||
|
|
qcom,pmic-id = "a";
|
||
|
|
|
||
|
|
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
||
|
|
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
||
|
|
|
||
|
|
vreg_s2a_1p125: smps2 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s3a_1p35: smps3 {
|
||
|
|
regulator-min-microvolt = <1352000>;
|
||
|
|
regulator-max-microvolt = <1352000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s4a_1p8: smps4 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s5a_2p04: smps5 {
|
||
|
|
regulator-min-microvolt = <2040000>;
|
||
|
|
regulator-max-microvolt = <2040000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_s7a_1p025: smps7 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_qusb_hs0:
|
||
|
|
vdda_hp_pcie_core:
|
||
|
|
vdda_mipi_csi0_0p9:
|
||
|
|
vdda_mipi_csi1_0p9:
|
||
|
|
vdda_mipi_csi2_0p9:
|
||
|
|
vdda_mipi_dsi0_pll:
|
||
|
|
vdda_mipi_dsi1_pll:
|
||
|
|
vdda_qlink_lv:
|
||
|
|
vdda_qlink_lv_ck:
|
||
|
|
vdda_qrefs_0p875:
|
||
|
|
vdda_pcie_core:
|
||
|
|
vdda_pll_cc_ebi01:
|
||
|
|
vdda_pll_cc_ebi23:
|
||
|
|
vdda_sp_sensor:
|
||
|
|
vdda_ufs1_core:
|
||
|
|
vdda_ufs2_core:
|
||
|
|
vdda_usb1_ss_core:
|
||
|
|
vdda_usb2_ss_core:
|
||
|
|
vreg_l1a_0p875: ldo1 {
|
||
|
|
regulator-min-microvolt = <880000>;
|
||
|
|
regulator-max-microvolt = <880000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vddpx_10:
|
||
|
|
vreg_l2a_1p2: ldo2 {
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l3a_1p0: ldo3 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_wcss_cx:
|
||
|
|
vdd_wcss_mx:
|
||
|
|
vdda_wcss_pll:
|
||
|
|
vreg_l5a_0p8: ldo5 {
|
||
|
|
regulator-min-microvolt = <800000>;
|
||
|
|
regulator-max-microvolt = <800000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vddpx_13:
|
||
|
|
vreg_l6a_1p8: ldo6 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l7a_1p8: ldo7 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l8a_1p2: ldo8 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l9a_1p8: ldo9 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l10a_1p8: ldo10 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l11a_1p0: ldo11 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_qfprom:
|
||
|
|
vdd_qfprom_sp:
|
||
|
|
vdda_apc1_cs_1p8:
|
||
|
|
vdda_gfx_cs_1p8:
|
||
|
|
vdda_qrefs_1p8:
|
||
|
|
vdda_qusb_hs0_1p8:
|
||
|
|
vddpx_11:
|
||
|
|
vreg_l12a_1p8: ldo12 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vddpx_2:
|
||
|
|
vreg_l13a_2p95: ldo13 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l14a_1p88: ldo14 {
|
||
|
|
regulator-min-microvolt = <1880000>;
|
||
|
|
regulator-max-microvolt = <1880000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l15a_1p8: ldo15 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l16a_2p7: ldo16 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l17a_1p3: ldo17 {
|
||
|
|
regulator-min-microvolt = <1304000>;
|
||
|
|
regulator-max-microvolt = <1304000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l18a_2p7: ldo18 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l19a_3p0: ldo19 {
|
||
|
|
regulator-min-microvolt = <3100000>;
|
||
|
|
regulator-max-microvolt = <3108000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l20a_2p95: ldo20 {
|
||
|
|
regulator-min-microvolt = <2960000>;
|
||
|
|
regulator-max-microvolt = <2960000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l21a_2p95: ldo21 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l22a_2p85: ldo22 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l23a_3p3: ldo23 {
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3312000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdda_qusb_hs0_3p1:
|
||
|
|
vreg_l24a_3p075: ldo24 {
|
||
|
|
regulator-min-microvolt = <3075000>;
|
||
|
|
regulator-max-microvolt = <3083000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l25a_3p3: ldo25 {
|
||
|
|
regulator-min-microvolt = <3104000>;
|
||
|
|
regulator-max-microvolt = <3112000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdda_hp_pcie_1p2:
|
||
|
|
vdda_hv_ebi0:
|
||
|
|
vdda_hv_ebi1:
|
||
|
|
vdda_hv_ebi2:
|
||
|
|
vdda_hv_ebi3:
|
||
|
|
vdda_mipi_csi_1p25:
|
||
|
|
vdda_mipi_dsi0_1p2:
|
||
|
|
vdda_mipi_dsi1_1p2:
|
||
|
|
vdda_pcie_1p2:
|
||
|
|
vdda_ufs1_1p2:
|
||
|
|
vdda_ufs2_1p2:
|
||
|
|
vdda_usb1_ss_1p2:
|
||
|
|
vdda_usb2_ss_1p2:
|
||
|
|
vreg_l26a_1p2: ldo26 {
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1208000>;
|
||
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_l28a_3p0: ldo28 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_lvs1a_1p8: lvs1 {
|
||
|
|
};
|
||
|
|
|
||
|
|
vreg_lvs2a_1p8: lvs2 {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&cdsp_pas {
|
||
|
|
firmware-name = "qcom/sdm850/LENOVO/81JL/qccdsp850.mbn";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi0 {
|
||
|
|
status = "okay";
|
||
|
|
vdda-supply = <&vreg_l26a_1p2>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
port@1 {
|
||
|
|
endpoint {
|
||
|
|
remote-endpoint = <&sn65dsi86_in_a>;
|
||
|
|
data-lanes = <0 1 2 3>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&dsi0_phy {
|
||
|
|
status = "okay";
|
||
|
|
vdds-supply = <&vreg_l1a_0p875>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&gcc {
|
||
|
|
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||
|
|
<GCC_QSPI_CORE_CLK_SRC>,
|
||
|
|
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
||
|
|
<GCC_LPASS_Q6_AXI_CLK>,
|
||
|
|
<GCC_LPASS_SWAY_CLK>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&gmu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpu {
|
||
|
|
status = "okay";
|
||
|
|
zap-shader {
|
||
|
|
memory-region = <&gpu_mem>;
|
||
|
|
firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
/* Overwrite pinctrl-0 from sdm845.dtsi */
|
||
|
|
pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
|
||
|
|
|
||
|
|
tsel: hid@15 {
|
||
|
|
compatible = "hid-over-i2c";
|
||
|
|
reg = <0x15>;
|
||
|
|
hid-descr-addr = <0x1>;
|
||
|
|
|
||
|
|
interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
tsc2: hid@2c {
|
||
|
|
compatible = "hid-over-i2c";
|
||
|
|
reg = <0x2c>;
|
||
|
|
hid-descr-addr = <0x20>;
|
||
|
|
|
||
|
|
interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c5 {
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
tsc1: hid@10 {
|
||
|
|
compatible = "hid-over-i2c";
|
||
|
|
reg = <0x10>;
|
||
|
|
hid-descr-addr = <0x1>;
|
||
|
|
|
||
|
|
interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c5_hid_active>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c10 {
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
sn65dsi86: bridge@2c {
|
||
|
|
compatible = "ti,sn65dsi86";
|
||
|
|
reg = <0x2c>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&sn65dsi86_pin_active>;
|
||
|
|
|
||
|
|
enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
|
||
|
|
|
||
|
|
vpll-supply = <&vreg_l14a_1p88>;
|
||
|
|
vccio-supply = <&vreg_l14a_1p88>;
|
||
|
|
|
||
|
|
clocks = <&sn65dsi86_refclk>;
|
||
|
|
clock-names = "refclk";
|
||
|
|
|
||
|
|
no-hpd;
|
||
|
|
#pwm-cells = <1>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
sn65dsi86_in_a: endpoint {
|
||
|
|
remote-endpoint = <&dsi0_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
sn65dsi86_out: endpoint {
|
||
|
|
remote-endpoint = <&panel_in_edp>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
aux-bus {
|
||
|
|
panel: panel {
|
||
|
|
compatible = "boe,nv133fhm-n61";
|
||
|
|
backlight = <&backlight>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
panel_in_edp: endpoint {
|
||
|
|
remote-endpoint = <&sn65dsi86_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c11 {
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
ecsh: hid@5c {
|
||
|
|
compatible = "hid-over-i2c";
|
||
|
|
reg = <0x5c>;
|
||
|
|
hid-descr-addr = <0x1>;
|
||
|
|
|
||
|
|
interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c11_hid_active>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ipa {
|
||
|
|
qcom,gsi-loader = "self";
|
||
|
|
memory-region = <&ipa_fw_mem>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mdss {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&mss_pil {
|
||
|
|
status = "okay";
|
||
|
|
firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn";
|
||
|
|
};
|
||
|
|
|
||
|
|
&qup_i2c10_default {
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qup_i2c12_default {
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qupv3_id_0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&qupv3_id_1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&q6asmdai {
|
||
|
|
dai@0 {
|
||
|
|
reg = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dai@1 {
|
||
|
|
reg = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dai@2 {
|
||
|
|
reg = <2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&sound {
|
||
|
|
compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
|
||
|
|
model = "Lenovo-YOGA-C630-13Q50";
|
||
|
|
|
||
|
|
audio-routing =
|
||
|
|
"RX_BIAS", "MCLK",
|
||
|
|
"AMIC2", "MIC BIAS2",
|
||
|
|
"SpkrLeft IN", "SPK1 OUT",
|
||
|
|
"SpkrRight IN", "SPK2 OUT",
|
||
|
|
"MM_DL1", "MultiMedia1 Playback",
|
||
|
|
"MM_DL3", "MultiMedia3 Playback",
|
||
|
|
"MultiMedia2 Capture", "MM_UL2";
|
||
|
|
|
||
|
|
mm1-dai-link {
|
||
|
|
link-name = "MultiMedia1";
|
||
|
|
cpu {
|
||
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mm2-dai-link {
|
||
|
|
link-name = "MultiMedia2";
|
||
|
|
cpu {
|
||
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mm3-dai-link {
|
||
|
|
link-name = "MultiMedia3";
|
||
|
|
cpu {
|
||
|
|
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
slim-dai-link {
|
||
|
|
link-name = "SLIM Playback";
|
||
|
|
cpu {
|
||
|
|
sound-dai = <&q6afedai SLIMBUS_0_RX>;
|
||
|
|
};
|
||
|
|
|
||
|
|
platform {
|
||
|
|
sound-dai = <&q6routing>;
|
||
|
|
};
|
||
|
|
|
||
|
|
codec {
|
||
|
|
sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
slimcap-dai-link {
|
||
|
|
link-name = "SLIM Capture";
|
||
|
|
cpu {
|
||
|
|
sound-dai = <&q6afedai SLIMBUS_0_TX>;
|
||
|
|
};
|
||
|
|
|
||
|
|
platform {
|
||
|
|
sound-dai = <&q6routing>;
|
||
|
|
};
|
||
|
|
|
||
|
|
codec {
|
||
|
|
sound-dai = <&wcd9340 1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
slim-wcd-dai-link {
|
||
|
|
link-name = "SLIM WCD Playback";
|
||
|
|
cpu {
|
||
|
|
sound-dai = <&q6afedai SLIMBUS_1_RX>;
|
||
|
|
};
|
||
|
|
|
||
|
|
platform {
|
||
|
|
sound-dai = <&q6routing>;
|
||
|
|
};
|
||
|
|
|
||
|
|
codec {
|
||
|
|
sound-dai = <&wcd9340 2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&tlmm {
|
||
|
|
gpio-reserved-ranges = <0 4>, <81 4>;
|
||
|
|
|
||
|
|
sn65dsi86_pin_active: sn65dsi86-enable-state {
|
||
|
|
pins = "gpio96";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <2>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c3_hid_active: i2c2-hid-active-state {
|
||
|
|
pins = "gpio37";
|
||
|
|
function = "gpio";
|
||
|
|
|
||
|
|
input-enable;
|
||
|
|
bias-pull-up;
|
||
|
|
drive-strength = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c5_hid_active: i2c5-hid-active-state {
|
||
|
|
pins = "gpio125";
|
||
|
|
function = "gpio";
|
||
|
|
|
||
|
|
input-enable;
|
||
|
|
bias-pull-up;
|
||
|
|
drive-strength = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c11_hid_active: i2c11-hid-active-state {
|
||
|
|
pins = "gpio92";
|
||
|
|
function = "gpio";
|
||
|
|
|
||
|
|
input-enable;
|
||
|
|
bias-pull-up;
|
||
|
|
drive-strength = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
lid_pin_active: lid-pin-state {
|
||
|
|
pins = "gpio124";
|
||
|
|
function = "gpio";
|
||
|
|
|
||
|
|
input-enable;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
mode_pin_active: mode-pin-state {
|
||
|
|
pins = "gpio95";
|
||
|
|
function = "gpio";
|
||
|
|
|
||
|
|
input-enable;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart6 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&qup_uart6_4pin>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
bluetooth {
|
||
|
|
compatible = "qcom,wcn3990-bt";
|
||
|
|
|
||
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
||
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
||
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
||
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
||
|
|
vddch1-supply = <&vreg_l23a_3p3>;
|
||
|
|
max-speed = <3200000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufs_mem_hc {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
vcc-supply = <&vreg_l20a_2p95>;
|
||
|
|
vcc-max-microamp = <600000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&ufs_mem_phy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-phy-supply = <&vdda_ufs1_core>;
|
||
|
|
vdda-pll-supply = <&vdda_ufs1_1p2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_1_dwc3 {
|
||
|
|
dr_mode = "host";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_1_hsphy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdd-supply = <&vdda_usb1_ss_core>;
|
||
|
|
vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
|
||
|
|
vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
|
||
|
|
|
||
|
|
qcom,imp-res-offset-value = <8>;
|
||
|
|
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
||
|
|
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
||
|
|
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_1_qmpphy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-phy-supply = <&vdda_usb1_ss_1p2>;
|
||
|
|
vdda-pll-supply = <&vdda_usb1_ss_core>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_2 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_2_dwc3 {
|
||
|
|
dr_mode = "host";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_2_hsphy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdd-supply = <&vdda_usb2_ss_core>;
|
||
|
|
vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
|
||
|
|
vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
|
||
|
|
|
||
|
|
qcom,imp-res-offset-value = <8>;
|
||
|
|
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_2_qmpphy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
|
||
|
|
vdda-pll-supply = <&vdda_usb2_ss_core>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&venus {
|
||
|
|
firmware-name = "qcom/sdm850/LENOVO/81JL/qcvss850.mbn";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&wcd9340 {
|
||
|
|
reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
|
||
|
|
vdd-buck-supply = <&vreg_s4a_1p8>;
|
||
|
|
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
|
||
|
|
vdd-tx-supply = <&vreg_s4a_1p8>;
|
||
|
|
vdd-rx-supply = <&vreg_s4a_1p8>;
|
||
|
|
vdd-io-supply = <&vreg_s4a_1p8>;
|
||
|
|
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
|
||
|
|
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
|
||
|
|
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
|
||
|
|
|
||
|
|
swm: swm@c85 {
|
||
|
|
left_spkr: speaker@0,3 {
|
||
|
|
compatible = "sdw10217211000";
|
||
|
|
reg = <0 3>;
|
||
|
|
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
|
||
|
|
#thermal-sensor-cells = <0>;
|
||
|
|
sound-name-prefix = "SpkrLeft";
|
||
|
|
#sound-dai-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
right_spkr: speaker@0,4 {
|
||
|
|
compatible = "sdw10217211000";
|
||
|
|
powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
|
||
|
|
reg = <0 4>;
|
||
|
|
#thermal-sensor-cells = <0>;
|
||
|
|
sound-name-prefix = "SpkrRight";
|
||
|
|
#sound-dai-cells = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&wifi {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||
|
|
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||
|
|
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||
|
|
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||
|
|
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
|
||
|
|
|
||
|
|
qcom,snoc-host-cap-8bit-quirk;
|
||
|
|
};
|
||
|
|
|
||
|
|
&crypto {
|
||
|
|
/* FIXME: qce_start triggers an SError */
|
||
|
|
status = "disable";
|
||
|
|
};
|