457 lines
8.1 KiB
Plaintext
457 lines
8.1 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
/*
|
||
|
|
* Device Tree Source for the Kingfisher (ULCB extension) board
|
||
|
|
*
|
||
|
|
* Copyright (C) 2017 Renesas Electronics Corp.
|
||
|
|
* Copyright (C) 2017 Cogent Embedded, Inc.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/ {
|
||
|
|
aliases {
|
||
|
|
serial1 = &hscif0;
|
||
|
|
serial2 = &scif1;
|
||
|
|
mmc2 = &sdhi3;
|
||
|
|
};
|
||
|
|
|
||
|
|
clksndsel: clksndsel {
|
||
|
|
#clock-cells = <0>;
|
||
|
|
compatible = "gpio-mux-clock";
|
||
|
|
clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */
|
||
|
|
select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
hdmi1-out {
|
||
|
|
compatible = "hdmi-connector";
|
||
|
|
type = "a";
|
||
|
|
|
||
|
|
port {
|
||
|
|
hdmi1_con: endpoint {
|
||
|
|
remote-endpoint = <&adv7513_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
accel_3v3: regulator-acc-3v3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "accel-3v3";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
hdmi_1v8: regulator-hdmi-1v8 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "hdmi-1v8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
hdmi_3v3: regulator-hdmi-3v3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "hdmi-3v3";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
snd_3p3v: regulator-snd_3p3v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "snd-3.3v";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
snd_vcc5v: regulator-snd_vcc5v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "snd-vcc5v";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wlan_en: regulator-wlan_en {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "wlan-en-regulator";
|
||
|
|
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
|
||
|
|
gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
|
||
|
|
startup-delay-us = <70000>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&can0 {
|
||
|
|
pinctrl-0 = <&can0_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&can1 {
|
||
|
|
pinctrl-0 = <&can1_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&du {
|
||
|
|
ports {
|
||
|
|
port@0 {
|
||
|
|
du_out_rgb: endpoint {
|
||
|
|
remote-endpoint = <&adv7513_in>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ehci0 {
|
||
|
|
dr_mode = "otg";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&hscif0 {
|
||
|
|
pinctrl-0 = <&hscif0_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
uart-has-rtscts;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&hsusb {
|
||
|
|
dr_mode = "otg";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c2 {
|
||
|
|
i2cmux2: i2c-mux@71 {
|
||
|
|
compatible = "nxp,pca9548";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0x71>;
|
||
|
|
reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
/* HDMIoSDA, HDMIoSCL */
|
||
|
|
i2c@4 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <4>;
|
||
|
|
|
||
|
|
hdmi@3d {
|
||
|
|
compatible = "adi,adv7513";
|
||
|
|
reg = <0x3d>;
|
||
|
|
|
||
|
|
pinctrl-0 = <&hdmi1_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
|
||
|
|
interrupt-parent = <&gpio2>;
|
||
|
|
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
|
||
|
|
clocks = <&cs2000>;
|
||
|
|
clock-names = "cec";
|
||
|
|
|
||
|
|
pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>;
|
||
|
|
|
||
|
|
avdd-supply = <&hdmi_1v8>;
|
||
|
|
dvdd-supply = <&hdmi_1v8>;
|
||
|
|
pvdd-supply = <&hdmi_1v8>;
|
||
|
|
dvdd-3v-supply = <&hdmi_3v3>;
|
||
|
|
bgvdd-supply = <&hdmi_1v8>;
|
||
|
|
|
||
|
|
adi,input-depth = <8>;
|
||
|
|
adi,input-colorspace = "rgb";
|
||
|
|
adi,input-clock = "1x";
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
adv7513_in: endpoint {
|
||
|
|
remote-endpoint = <&du_out_rgb>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
adv7513_out: endpoint {
|
||
|
|
remote-endpoint = <&hdmi1_con>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Audio_SDA, Audio_SCL */
|
||
|
|
i2c@7 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <7>;
|
||
|
|
|
||
|
|
accelerometer@1d {
|
||
|
|
compatible = "st,lsm9ds0-imu";
|
||
|
|
reg = <0x1d>;
|
||
|
|
|
||
|
|
vdd-supply = <&accel_3v3>;
|
||
|
|
vddio-supply = <&accel_3v3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pcm3168a: audio-codec@44 {
|
||
|
|
#sound-dai-cells = <0>;
|
||
|
|
compatible = "ti,pcm3168a";
|
||
|
|
reg = <0x44>;
|
||
|
|
clocks = <&clksndsel>;
|
||
|
|
clock-names = "scki";
|
||
|
|
|
||
|
|
VDD1-supply = <&snd_3p3v>;
|
||
|
|
VDD2-supply = <&snd_3p3v>;
|
||
|
|
VCCAD1-supply = <&snd_vcc5v>;
|
||
|
|
VCCAD2-supply = <&snd_vcc5v>;
|
||
|
|
VCCDA1-supply = <&snd_vcc5v>;
|
||
|
|
VCCDA2-supply = <&snd_vcc5v>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gyroscope@6b {
|
||
|
|
compatible = "st,lsm9ds0-gyro";
|
||
|
|
reg = <0x6b>;
|
||
|
|
|
||
|
|
vdd-supply = <&accel_3v3>;
|
||
|
|
vddio-supply = <&accel_3v3>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* U11 */
|
||
|
|
gpio_exp_74: gpio@74 {
|
||
|
|
compatible = "ti,tca9539";
|
||
|
|
reg = <0x74>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
interrupt-parent = <&gpio6>;
|
||
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
|
||
|
|
audio-out-off-hog {
|
||
|
|
gpio-hog;
|
||
|
|
gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
|
||
|
|
output-high;
|
||
|
|
line-name = "Audio_Out_OFF";
|
||
|
|
};
|
||
|
|
|
||
|
|
hub-pwen-hog {
|
||
|
|
gpio-hog;
|
||
|
|
gpios = <6 GPIO_ACTIVE_HIGH>;
|
||
|
|
output-high;
|
||
|
|
line-name = "HUB pwen";
|
||
|
|
};
|
||
|
|
|
||
|
|
hub-rst-hog {
|
||
|
|
gpio-hog;
|
||
|
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||
|
|
output-high;
|
||
|
|
line-name = "HUB rst";
|
||
|
|
};
|
||
|
|
|
||
|
|
otg-extlpn-hog {
|
||
|
|
gpio-hog;
|
||
|
|
gpios = <9 GPIO_ACTIVE_HIGH>;
|
||
|
|
output-high;
|
||
|
|
line-name = "OTG EXTLPn";
|
||
|
|
};
|
||
|
|
|
||
|
|
otg-offvbusn-hog {
|
||
|
|
gpio-hog;
|
||
|
|
gpios = <8 GPIO_ACTIVE_HIGH>;
|
||
|
|
output-low;
|
||
|
|
line-name = "OTG OFFVBUSn";
|
||
|
|
};
|
||
|
|
|
||
|
|
sd-wifi-mux-hog {
|
||
|
|
gpio-hog;
|
||
|
|
gpios = <5 GPIO_ACTIVE_HIGH>;
|
||
|
|
output-low; /* Connect WL1837 */
|
||
|
|
line-name = "SD WiFi mux";
|
||
|
|
};
|
||
|
|
|
||
|
|
snd-rst-hog {
|
||
|
|
gpio-hog;
|
||
|
|
gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
|
||
|
|
output-high;
|
||
|
|
line-name = "SND_RST";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/* U5 */
|
||
|
|
gpio_exp_75: gpio@75 {
|
||
|
|
compatible = "ti,tca9539";
|
||
|
|
reg = <0x75>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
interrupt-parent = <&gpio6>;
|
||
|
|
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c4 {
|
||
|
|
i2cmux4: i2c-mux@71 {
|
||
|
|
compatible = "nxp,pca9548";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0x71>;
|
||
|
|
reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_exp_76: gpio@76 {
|
||
|
|
compatible = "ti,tca9539";
|
||
|
|
reg = <0x76>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
interrupt-parent = <&gpio7>;
|
||
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_exp_77: gpio@77 {
|
||
|
|
compatible = "ti,tca9539";
|
||
|
|
reg = <0x77>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
interrupt-parent = <&gpio5>;
|
||
|
|
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ohci0 {
|
||
|
|
dr_mode = "otg";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie_bus_clk {
|
||
|
|
clock-frequency = <100000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pciec0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pciec1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pfc {
|
||
|
|
can0_pins: can0 {
|
||
|
|
groups = "can0_data_a";
|
||
|
|
function = "can0";
|
||
|
|
};
|
||
|
|
|
||
|
|
can1_pins: can1 {
|
||
|
|
groups = "can1_data";
|
||
|
|
function = "can1";
|
||
|
|
};
|
||
|
|
|
||
|
|
hdmi1_pins: hdmi1 {
|
||
|
|
adv7513-interrupt {
|
||
|
|
pins = "GP_2_14";
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
du {
|
||
|
|
groups = "du_rgb888", "du_sync", "du_clk_out_0",
|
||
|
|
"du_disp";
|
||
|
|
function = "du";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
hscif0_pins: hscif0 {
|
||
|
|
groups = "hscif0_data", "hscif0_ctrl";
|
||
|
|
function = "hscif0";
|
||
|
|
};
|
||
|
|
|
||
|
|
scif1_pins: scif1 {
|
||
|
|
groups = "scif1_data_b", "scif1_ctrl";
|
||
|
|
function = "scif1";
|
||
|
|
};
|
||
|
|
|
||
|
|
sdhi3_pins: sdhi3 {
|
||
|
|
groups = "sdhi3_data4", "sdhi3_ctrl";
|
||
|
|
function = "sdhi3";
|
||
|
|
power-source = <3300>;
|
||
|
|
};
|
||
|
|
|
||
|
|
sound_pcm_pins: sound-pcm {
|
||
|
|
groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
|
||
|
|
function = "ssi";
|
||
|
|
};
|
||
|
|
|
||
|
|
usb0_pins: usb0 {
|
||
|
|
groups = "usb0";
|
||
|
|
function = "usb0";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&rcar_sound {
|
||
|
|
pinctrl-0 = <&sound_pins
|
||
|
|
&sound_clk_pins
|
||
|
|
&sound_pcm_pins>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&scif1 {
|
||
|
|
pinctrl-0 = <&scif1_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
uart-has-rtscts;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhi3 {
|
||
|
|
pinctrl-0 = <&sdhi3_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
|
||
|
|
vmmc-supply = <&wlan_en>;
|
||
|
|
vqmmc-supply = <&wlan_en>;
|
||
|
|
bus-width = <4>;
|
||
|
|
no-1-8-v;
|
||
|
|
non-removable;
|
||
|
|
cap-power-off-card;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
max-frequency = <26000000>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
wlcore: wlcore@2 {
|
||
|
|
compatible = "ti,wl1837";
|
||
|
|
reg = <2>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ssi4 {
|
||
|
|
shared-pin;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb2_phy0 {
|
||
|
|
pinctrl-0 = <&usb0_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&xhci0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* For sound-test.
|
||
|
|
*
|
||
|
|
* We can switch Audio Card for testing
|
||
|
|
* see also ulcb.dtsi
|
||
|
|
*
|
||
|
|
* #include "ulcb-kf-simple-audio-card.dtsi"
|
||
|
|
* #include "ulcb-kf-simple-audio-card-mix+split.dtsi"
|
||
|
|
* #include "ulcb-kf-audio-graph-card.dtsi"
|
||
|
|
* #include "ulcb-kf-audio-graph-card-mix+split.dtsi"
|
||
|
|
* #include "ulcb-kf-audio-graph-card2-mix+split.dtsi"
|
||
|
|
*/
|
||
|
|
#include "ulcb-kf-audio-graph-card2.dtsi"
|