linux-zen-desktop/drivers/rtc/rtc-gamecube.c

379 lines
10 KiB
C
Raw Normal View History

2023-08-30 17:31:07 +02:00
// SPDX-License-Identifier: GPL-2.0
/*
* Nintendo GameCube, Wii and Wii U RTC driver
*
* This driver is for the MX23L4005, more specifically its real-time clock and
* SRAM storage. The value returned by the RTC counter must be added with the
* offset stored in a bias register in SRAM (on the GameCube and Wii) or in
* /config/rtc.xml (on the Wii U). The latter being very impractical to access
* from Linux, this driver assumes the bootloader has read it and stored it in
* SRAM like for the other two consoles.
*
* This device sits on a bus named EXI (which is similar to SPI), channel 0,
* device 1. This driver assumes no other user of the EXI bus, which is
* currently the case but would have to be reworked to add support for other
* GameCube hardware exposed on this bus.
*
* References:
* - https://wiiubrew.org/wiki/Hardware/RTC
* - https://wiibrew.org/wiki/MX23L4005
*
* Copyright (C) 2018 rw-r-r-0644
* Copyright (C) 2021 Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
*
* Based on rtc-gcn.c
* Copyright (C) 2004-2009 The GameCube Linux Team
* Copyright (C) 2005,2008,2009 Albert Herranz
* Based on gamecube_time.c from Torben Nielsen.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#include <linux/time.h>
/* EXI registers */
#define EXICSR 0
#define EXICR 12
#define EXIDATA 16
/* EXI register values */
#define EXICSR_DEV 0x380
#define EXICSR_DEV1 0x100
#define EXICSR_CLK 0x070
#define EXICSR_CLK_1MHZ 0x000
#define EXICSR_CLK_2MHZ 0x010
#define EXICSR_CLK_4MHZ 0x020
#define EXICSR_CLK_8MHZ 0x030
#define EXICSR_CLK_16MHZ 0x040
#define EXICSR_CLK_32MHZ 0x050
#define EXICSR_INT 0x008
#define EXICSR_INTSET 0x008
#define EXICR_TSTART 0x001
#define EXICR_TRSMODE 0x002
#define EXICR_TRSMODE_IMM 0x000
#define EXICR_TRSTYPE 0x00C
#define EXICR_TRSTYPE_R 0x000
#define EXICR_TRSTYPE_W 0x004
#define EXICR_TLEN 0x030
#define EXICR_TLEN32 0x030
/* EXI registers values to access the RTC */
#define RTC_EXICSR (EXICSR_DEV1 | EXICSR_CLK_8MHZ | EXICSR_INTSET)
#define RTC_EXICR_W (EXICR_TSTART | EXICR_TRSMODE_IMM | EXICR_TRSTYPE_W | EXICR_TLEN32)
#define RTC_EXICR_R (EXICR_TSTART | EXICR_TRSMODE_IMM | EXICR_TRSTYPE_R | EXICR_TLEN32)
#define RTC_EXIDATA_W 0x80000000
/* RTC registers */
#define RTC_COUNTER 0x200000
#define RTC_SRAM 0x200001
#define RTC_SRAM_BIAS 0x200004
#define RTC_SNAPSHOT 0x204000
#define RTC_ONTMR 0x210000
#define RTC_OFFTMR 0x210001
#define RTC_TEST0 0x210004
#define RTC_TEST1 0x210005
#define RTC_TEST2 0x210006
#define RTC_TEST3 0x210007
#define RTC_CONTROL0 0x21000c
#define RTC_CONTROL1 0x21000d
/* RTC flags */
#define RTC_CONTROL0_UNSTABLE_POWER 0x00000800
#define RTC_CONTROL0_LOW_BATTERY 0x00000200
struct priv {
struct regmap *regmap;
void __iomem *iob;
u32 rtc_bias;
};
static int exi_read(void *context, u32 reg, u32 *data)
{
struct priv *d = (struct priv *)context;
void __iomem *iob = d->iob;
/* The spin loops here loop about 15~16 times each, so there is no need
* to use a more expensive sleep method.
*/
/* Write register offset */
iowrite32be(RTC_EXICSR, iob + EXICSR);
iowrite32be(reg << 8, iob + EXIDATA);
iowrite32be(RTC_EXICR_W, iob + EXICR);
while (!(ioread32be(iob + EXICSR) & EXICSR_INTSET))
cpu_relax();
/* Read data */
iowrite32be(RTC_EXICSR, iob + EXICSR);
iowrite32be(RTC_EXICR_R, iob + EXICR);
while (!(ioread32be(iob + EXICSR) & EXICSR_INTSET))
cpu_relax();
*data = ioread32be(iob + EXIDATA);
/* Clear channel parameters */
iowrite32be(0, iob + EXICSR);
return 0;
}
static int exi_write(void *context, u32 reg, u32 data)
{
struct priv *d = (struct priv *)context;
void __iomem *iob = d->iob;
/* The spin loops here loop about 15~16 times each, so there is no need
* to use a more expensive sleep method.
*/
/* Write register offset */
iowrite32be(RTC_EXICSR, iob + EXICSR);
iowrite32be(RTC_EXIDATA_W | (reg << 8), iob + EXIDATA);
iowrite32be(RTC_EXICR_W, iob + EXICR);
while (!(ioread32be(iob + EXICSR) & EXICSR_INTSET))
cpu_relax();
/* Write data */
iowrite32be(RTC_EXICSR, iob + EXICSR);
iowrite32be(data, iob + EXIDATA);
iowrite32be(RTC_EXICR_W, iob + EXICR);
while (!(ioread32be(iob + EXICSR) & EXICSR_INTSET))
cpu_relax();
/* Clear channel parameters */
iowrite32be(0, iob + EXICSR);
return 0;
}
static const struct regmap_bus exi_bus = {
/* TODO: is that true? Not that it matters here, but still. */
.fast_io = true,
.reg_read = exi_read,
.reg_write = exi_write,
};
static int gamecube_rtc_read_time(struct device *dev, struct rtc_time *t)
{
struct priv *d = dev_get_drvdata(dev);
int ret;
u32 counter;
time64_t timestamp;
ret = regmap_read(d->regmap, RTC_COUNTER, &counter);
if (ret)
return ret;
/* Add the counter and the bias to obtain the timestamp */
timestamp = (time64_t)d->rtc_bias + counter;
rtc_time64_to_tm(timestamp, t);
return 0;
}
static int gamecube_rtc_set_time(struct device *dev, struct rtc_time *t)
{
struct priv *d = dev_get_drvdata(dev);
time64_t timestamp;
/* Subtract the timestamp and the bias to obtain the counter value */
timestamp = rtc_tm_to_time64(t);
return regmap_write(d->regmap, RTC_COUNTER, timestamp - d->rtc_bias);
}
static int gamecube_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct priv *d = dev_get_drvdata(dev);
int value;
int control0;
int ret;
switch (cmd) {
case RTC_VL_READ:
ret = regmap_read(d->regmap, RTC_CONTROL0, &control0);
if (ret)
return ret;
value = 0;
if (control0 & RTC_CONTROL0_UNSTABLE_POWER)
value |= RTC_VL_DATA_INVALID;
if (control0 & RTC_CONTROL0_LOW_BATTERY)
value |= RTC_VL_BACKUP_LOW;
return put_user(value, (unsigned int __user *)arg);
default:
return -ENOIOCTLCMD;
}
}
static const struct rtc_class_ops gamecube_rtc_ops = {
.read_time = gamecube_rtc_read_time,
.set_time = gamecube_rtc_set_time,
.ioctl = gamecube_rtc_ioctl,
};
static int gamecube_rtc_read_offset_from_sram(struct priv *d)
{
struct device_node *np;
int ret;
struct resource res;
void __iomem *hw_srnprot;
u32 old;
np = of_find_compatible_node(NULL, NULL, "nintendo,latte-srnprot");
if (!np)
np = of_find_compatible_node(NULL, NULL,
"nintendo,hollywood-srnprot");
if (!np) {
pr_info("HW_SRNPROT not found, assuming a GameCube\n");
return regmap_read(d->regmap, RTC_SRAM_BIAS, &d->rtc_bias);
}
ret = of_address_to_resource(np, 0, &res);
of_node_put(np);
if (ret) {
pr_err("no io memory range found\n");
return -1;
}
hw_srnprot = ioremap(res.start, resource_size(&res));
old = ioread32be(hw_srnprot);
/* TODO: figure out why we use this magic constant. I obtained it by
* reading the leftover value after boot, after IOSU already ran.
*
* On my Wii U, setting this register to 1 prevents the console from
* rebooting properly, so wiiubrew.org must be missing something.
*
* See https://wiiubrew.org/wiki/Hardware/Latte_registers
*/
if (old != 0x7bf)
iowrite32be(0x7bf, hw_srnprot);
/* Get the offset from RTC SRAM.
*
* Its default location on the GameCube and on the Wii is in the SRAM,
* while on the Wii U the bootloader needs to fill it with the contents
* of /config/rtc.xml on the SLC (the eMMC). We dont do that from
* Linux since it requires implementing a proprietary filesystem and do
* file decryption, instead we require the bootloader to fill the same
* SRAM address as on previous consoles.
*/
ret = regmap_read(d->regmap, RTC_SRAM_BIAS, &d->rtc_bias);
/* Reset SRAM access to how it was before, our job here is done. */
if (old != 0x7bf)
iowrite32be(old, hw_srnprot);
iounmap(hw_srnprot);
if (ret)
pr_err("failed to get the RTC bias\n");
return ret;
}
static const struct regmap_range rtc_rd_ranges[] = {
regmap_reg_range(0x200000, 0x200010),
regmap_reg_range(0x204000, 0x204000),
regmap_reg_range(0x210000, 0x210001),
regmap_reg_range(0x210004, 0x210007),
regmap_reg_range(0x21000c, 0x21000d),
};
static const struct regmap_access_table rtc_rd_regs = {
.yes_ranges = rtc_rd_ranges,
.n_yes_ranges = ARRAY_SIZE(rtc_rd_ranges),
};
static const struct regmap_range rtc_wr_ranges[] = {
regmap_reg_range(0x200000, 0x200010),
regmap_reg_range(0x204000, 0x204000),
regmap_reg_range(0x210000, 0x210001),
regmap_reg_range(0x21000d, 0x21000d),
};
static const struct regmap_access_table rtc_wr_regs = {
.yes_ranges = rtc_wr_ranges,
.n_yes_ranges = ARRAY_SIZE(rtc_wr_ranges),
};
static const struct regmap_config gamecube_rtc_regmap_config = {
.reg_bits = 24,
.val_bits = 32,
.rd_table = &rtc_rd_regs,
.wr_table = &rtc_wr_regs,
.max_register = 0x21000d,
.name = "gamecube-rtc",
};
static int gamecube_rtc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rtc_device *rtc;
struct priv *d;
int ret;
d = devm_kzalloc(dev, sizeof(struct priv), GFP_KERNEL);
if (!d)
return -ENOMEM;
d->iob = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(d->iob))
return PTR_ERR(d->iob);
d->regmap = devm_regmap_init(dev, &exi_bus, d,
&gamecube_rtc_regmap_config);
if (IS_ERR(d->regmap))
return PTR_ERR(d->regmap);
ret = gamecube_rtc_read_offset_from_sram(d);
if (ret)
return ret;
dev_dbg(dev, "SRAM bias: 0x%x", d->rtc_bias);
dev_set_drvdata(dev, d);
rtc = devm_rtc_allocate_device(dev);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
/* We can represent further than that, but it depends on the stored
* bias and we cant modify it persistently on all supported consoles,
* so here we pretend to be limited to 2106.
*/
rtc->range_min = 0;
rtc->range_max = U32_MAX;
rtc->ops = &gamecube_rtc_ops;
devm_rtc_register_device(rtc);
return 0;
}
static const struct of_device_id gamecube_rtc_of_match[] = {
{.compatible = "nintendo,latte-exi" },
{.compatible = "nintendo,hollywood-exi" },
{.compatible = "nintendo,flipper-exi" },
{ }
};
MODULE_DEVICE_TABLE(of, gamecube_rtc_of_match);
static struct platform_driver gamecube_rtc_driver = {
.probe = gamecube_rtc_probe,
.driver = {
.name = "rtc-gamecube",
.of_match_table = gamecube_rtc_of_match,
},
};
module_platform_driver(gamecube_rtc_driver);
MODULE_AUTHOR("Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>");
MODULE_DESCRIPTION("Nintendo GameCube, Wii and Wii U RTC driver");
MODULE_LICENSE("GPL");