659 lines
17 KiB
Bash
659 lines
17 KiB
Bash
|
#!/bin/bash
|
||
|
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
|
#
|
||
|
|
# Test that packets are sampled when tc-sample is used and that reported
|
||
|
|
# metadata is correct. Two sets of hosts (with and without LAG) are used, since
|
||
|
|
# metadata extraction in mlxsw is a bit different when LAG is involved.
|
||
|
|
#
|
||
|
|
# +---------------------------------+ +---------------------------------+
|
||
|
|
# | H1 (vrf) | | H3 (vrf) |
|
||
|
|
# | + $h1 | | + $h3_lag |
|
||
|
|
# | | 192.0.2.1/28 | | | 192.0.2.17/28 |
|
||
|
|
# | | | | | |
|
||
|
|
# | | default via 192.0.2.2 | | | default via 192.0.2.18 |
|
||
|
|
# +----|----------------------------+ +----|----------------------------+
|
||
|
|
# | |
|
||
|
|
# +----|-----------------------------------------|----------------------------+
|
||
|
|
# | | 192.0.2.2/28 | 192.0.2.18/28 |
|
||
|
|
# | + $rp1 + $rp3_lag |
|
||
|
|
# | |
|
||
|
|
# | + $rp2 + $rp4_lag |
|
||
|
|
# | | 198.51.100.2/28 | 198.51.100.18/28 |
|
||
|
|
# +----|-----------------------------------------|----------------------------+
|
||
|
|
# | |
|
||
|
|
# +----|----------------------------+ +----|----------------------------+
|
||
|
|
# | | default via 198.51.100.2 | | | default via 198.51.100.18 |
|
||
|
|
# | | | | | |
|
||
|
|
# | | 198.51.100.1/28 | | | 198.51.100.17/28 |
|
||
|
|
# | + $h2 | | + $h4_lag |
|
||
|
|
# | H2 (vrf) | | H4 (vrf) |
|
||
|
|
# +---------------------------------+ +---------------------------------+
|
||
|
|
|
||
|
|
lib_dir=$(dirname $0)/../../../net/forwarding
|
||
|
|
|
||
|
|
ALL_TESTS="
|
||
|
|
tc_sample_rate_test
|
||
|
|
tc_sample_max_rate_test
|
||
|
|
tc_sample_conflict_test
|
||
|
|
tc_sample_group_conflict_test
|
||
|
|
tc_sample_md_iif_test
|
||
|
|
tc_sample_md_lag_iif_test
|
||
|
|
tc_sample_md_oif_test
|
||
|
|
tc_sample_md_lag_oif_test
|
||
|
|
tc_sample_md_out_tc_test
|
||
|
|
tc_sample_md_out_tc_occ_test
|
||
|
|
tc_sample_md_latency_test
|
||
|
|
tc_sample_acl_group_conflict_test
|
||
|
|
tc_sample_acl_rate_test
|
||
|
|
tc_sample_acl_max_rate_test
|
||
|
|
"
|
||
|
|
NUM_NETIFS=8
|
||
|
|
CAPTURE_FILE=$(mktemp)
|
||
|
|
source $lib_dir/lib.sh
|
||
|
|
source $lib_dir/devlink_lib.sh
|
||
|
|
source mlxsw_lib.sh
|
||
|
|
|
||
|
|
# Available at https://github.com/Mellanox/libpsample
|
||
|
|
require_command psample
|
||
|
|
|
||
|
|
h1_create()
|
||
|
|
{
|
||
|
|
simple_if_init $h1 192.0.2.1/28
|
||
|
|
|
||
|
|
ip -4 route add default vrf v$h1 nexthop via 192.0.2.2
|
||
|
|
}
|
||
|
|
|
||
|
|
h1_destroy()
|
||
|
|
{
|
||
|
|
ip -4 route del default vrf v$h1 nexthop via 192.0.2.2
|
||
|
|
|
||
|
|
simple_if_fini $h1 192.0.2.1/28
|
||
|
|
}
|
||
|
|
|
||
|
|
h2_create()
|
||
|
|
{
|
||
|
|
simple_if_init $h2 198.51.100.1/28
|
||
|
|
|
||
|
|
ip -4 route add default vrf v$h2 nexthop via 198.51.100.2
|
||
|
|
}
|
||
|
|
|
||
|
|
h2_destroy()
|
||
|
|
{
|
||
|
|
ip -4 route del default vrf v$h2 nexthop via 198.51.100.2
|
||
|
|
|
||
|
|
simple_if_fini $h2 198.51.100.1/28
|
||
|
|
}
|
||
|
|
|
||
|
|
h3_create()
|
||
|
|
{
|
||
|
|
ip link set dev $h3 down
|
||
|
|
ip link add name ${h3}_bond type bond mode 802.3ad
|
||
|
|
ip link set dev $h3 master ${h3}_bond
|
||
|
|
|
||
|
|
simple_if_init ${h3}_bond 192.0.2.17/28
|
||
|
|
|
||
|
|
ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18
|
||
|
|
}
|
||
|
|
|
||
|
|
h3_destroy()
|
||
|
|
{
|
||
|
|
ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18
|
||
|
|
|
||
|
|
simple_if_fini ${h3}_bond 192.0.2.17/28
|
||
|
|
|
||
|
|
ip link set dev $h3 nomaster
|
||
|
|
ip link del dev ${h3}_bond
|
||
|
|
}
|
||
|
|
|
||
|
|
h4_create()
|
||
|
|
{
|
||
|
|
ip link set dev $h4 down
|
||
|
|
ip link add name ${h4}_bond type bond mode 802.3ad
|
||
|
|
ip link set dev $h4 master ${h4}_bond
|
||
|
|
|
||
|
|
simple_if_init ${h4}_bond 198.51.100.17/28
|
||
|
|
|
||
|
|
ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18
|
||
|
|
}
|
||
|
|
|
||
|
|
h4_destroy()
|
||
|
|
{
|
||
|
|
ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18
|
||
|
|
|
||
|
|
simple_if_fini ${h4}_bond 198.51.100.17/28
|
||
|
|
|
||
|
|
ip link set dev $h4 nomaster
|
||
|
|
ip link del dev ${h4}_bond
|
||
|
|
}
|
||
|
|
|
||
|
|
router_create()
|
||
|
|
{
|
||
|
|
ip link set dev $rp1 up
|
||
|
|
__addr_add_del $rp1 add 192.0.2.2/28
|
||
|
|
tc qdisc add dev $rp1 clsact
|
||
|
|
|
||
|
|
ip link set dev $rp2 up
|
||
|
|
__addr_add_del $rp2 add 198.51.100.2/28
|
||
|
|
tc qdisc add dev $rp2 clsact
|
||
|
|
|
||
|
|
ip link add name ${rp3}_bond type bond mode 802.3ad
|
||
|
|
ip link set dev $rp3 master ${rp3}_bond
|
||
|
|
__addr_add_del ${rp3}_bond add 192.0.2.18/28
|
||
|
|
tc qdisc add dev $rp3 clsact
|
||
|
|
ip link set dev ${rp3}_bond up
|
||
|
|
|
||
|
|
ip link add name ${rp4}_bond type bond mode 802.3ad
|
||
|
|
ip link set dev $rp4 master ${rp4}_bond
|
||
|
|
__addr_add_del ${rp4}_bond add 198.51.100.18/28
|
||
|
|
tc qdisc add dev $rp4 clsact
|
||
|
|
ip link set dev ${rp4}_bond up
|
||
|
|
}
|
||
|
|
|
||
|
|
router_destroy()
|
||
|
|
{
|
||
|
|
ip link set dev ${rp4}_bond down
|
||
|
|
tc qdisc del dev $rp4 clsact
|
||
|
|
__addr_add_del ${rp4}_bond del 198.51.100.18/28
|
||
|
|
ip link set dev $rp4 nomaster
|
||
|
|
ip link del dev ${rp4}_bond
|
||
|
|
|
||
|
|
ip link set dev ${rp3}_bond down
|
||
|
|
tc qdisc del dev $rp3 clsact
|
||
|
|
__addr_add_del ${rp3}_bond del 192.0.2.18/28
|
||
|
|
ip link set dev $rp3 nomaster
|
||
|
|
ip link del dev ${rp3}_bond
|
||
|
|
|
||
|
|
tc qdisc del dev $rp2 clsact
|
||
|
|
__addr_add_del $rp2 del 198.51.100.2/28
|
||
|
|
ip link set dev $rp2 down
|
||
|
|
|
||
|
|
tc qdisc del dev $rp1 clsact
|
||
|
|
__addr_add_del $rp1 del 192.0.2.2/28
|
||
|
|
ip link set dev $rp1 down
|
||
|
|
}
|
||
|
|
|
||
|
|
setup_prepare()
|
||
|
|
{
|
||
|
|
h1=${NETIFS[p1]}
|
||
|
|
rp1=${NETIFS[p2]}
|
||
|
|
rp2=${NETIFS[p3]}
|
||
|
|
h2=${NETIFS[p4]}
|
||
|
|
h3=${NETIFS[p5]}
|
||
|
|
rp3=${NETIFS[p6]}
|
||
|
|
h4=${NETIFS[p7]}
|
||
|
|
rp4=${NETIFS[p8]}
|
||
|
|
|
||
|
|
vrf_prepare
|
||
|
|
|
||
|
|
h1_create
|
||
|
|
h2_create
|
||
|
|
h3_create
|
||
|
|
h4_create
|
||
|
|
router_create
|
||
|
|
}
|
||
|
|
|
||
|
|
cleanup()
|
||
|
|
{
|
||
|
|
pre_cleanup
|
||
|
|
|
||
|
|
rm -f $CAPTURE_FILE
|
||
|
|
|
||
|
|
router_destroy
|
||
|
|
h4_destroy
|
||
|
|
h3_destroy
|
||
|
|
h2_destroy
|
||
|
|
h1_destroy
|
||
|
|
|
||
|
|
vrf_cleanup
|
||
|
|
}
|
||
|
|
|
||
|
|
psample_capture_start()
|
||
|
|
{
|
||
|
|
rm -f $CAPTURE_FILE
|
||
|
|
|
||
|
|
psample &> $CAPTURE_FILE &
|
||
|
|
|
||
|
|
sleep 1
|
||
|
|
}
|
||
|
|
|
||
|
|
psample_capture_stop()
|
||
|
|
{
|
||
|
|
{ kill %% && wait %%; } 2>/dev/null
|
||
|
|
}
|
||
|
|
|
||
|
|
__tc_sample_rate_test()
|
||
|
|
{
|
||
|
|
local desc=$1; shift
|
||
|
|
local dip=$1; shift
|
||
|
|
local pkts pct
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 32 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \
|
||
|
|
-B $dip -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
|
||
|
|
pct=$((100 * (pkts - 10000) / 10000))
|
||
|
|
(( -25 <= pct && pct <= 25))
|
||
|
|
check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
|
||
|
|
|
||
|
|
log_test "tc sample rate ($desc)"
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_rate_test()
|
||
|
|
{
|
||
|
|
__tc_sample_rate_test "forward" 198.51.100.1
|
||
|
|
__tc_sample_rate_test "local receive" 192.0.2.2
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_max_rate_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate $((35 * 10 ** 8)) group 1
|
||
|
|
check_err $? "Failed to configure sampling rule with max rate"
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate $((35 * 10 ** 8 + 1)) \
|
||
|
|
group 1 &> /dev/null
|
||
|
|
check_fail $? "Managed to configure sampling rate above maximum"
|
||
|
|
|
||
|
|
log_test "tc sample maximum rate"
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_conflict_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
# Test that two sampling rules cannot be configured on the same port,
|
||
|
|
# even when they share the same parameters.
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 1024 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
|
||
|
|
skip_sw action sample rate 1024 group 1 &> /dev/null
|
||
|
|
check_fail $? "Managed to configure second sampling rule"
|
||
|
|
|
||
|
|
# Delete the first rule and make sure the second rule can now be
|
||
|
|
# configured.
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
|
||
|
|
skip_sw action sample rate 1024 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule after deletion"
|
||
|
|
|
||
|
|
log_test "tc sample conflict test"
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 2 handle 102 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_group_conflict_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
# Test that two sampling rules cannot be configured on the same port
|
||
|
|
# with different groups.
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 1024 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
|
||
|
|
skip_sw action sample rate 1024 group 2 &> /dev/null
|
||
|
|
check_fail $? "Managed to configure sampling rule with conflicting group"
|
||
|
|
|
||
|
|
log_test "tc sample group conflict test"
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_md_iif_test()
|
||
|
|
{
|
||
|
|
local rp1_ifindex
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 5 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
|
||
|
|
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]')
|
||
|
|
grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE
|
||
|
|
check_err $? "Sampled packets do not have expected in-ifindex"
|
||
|
|
|
||
|
|
log_test "tc sample iif"
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_md_lag_iif_test()
|
||
|
|
{
|
||
|
|
local rp3_ifindex
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 5 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
|
||
|
|
-A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]')
|
||
|
|
grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE
|
||
|
|
check_err $? "Sampled packets do not have expected in-ifindex"
|
||
|
|
|
||
|
|
log_test "tc sample lag iif"
|
||
|
|
|
||
|
|
tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_md_oif_test()
|
||
|
|
{
|
||
|
|
local rp2_ifindex
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 5 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
|
||
|
|
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]')
|
||
|
|
grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE
|
||
|
|
check_err $? "Sampled packets do not have expected out-ifindex"
|
||
|
|
|
||
|
|
log_test "tc sample oif"
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_md_lag_oif_test()
|
||
|
|
{
|
||
|
|
local rp4_ifindex
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 5 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
|
||
|
|
-A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]')
|
||
|
|
grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE
|
||
|
|
check_err $? "Sampled packets do not have expected out-ifindex"
|
||
|
|
|
||
|
|
log_test "tc sample lag oif"
|
||
|
|
|
||
|
|
tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_md_out_tc_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
# Output traffic class is not supported on Spectrum-1.
|
||
|
|
mlxsw_only_on_spectrum 2+ || return
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 5 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
# By default, all the packets should go to the same traffic class (0).
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
|
||
|
|
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
grep -q -e "out-tc 0 " $CAPTURE_FILE
|
||
|
|
check_err $? "Sampled packets do not have expected out-tc (0)"
|
||
|
|
|
||
|
|
# Map all priorities to highest traffic class (7) and check reported
|
||
|
|
# out-tc.
|
||
|
|
tc qdisc replace dev $rp2 root handle 1: \
|
||
|
|
prio bands 3 priomap 0 0 0 0 0 0 0 0
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
|
||
|
|
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
grep -q -e "out-tc 7 " $CAPTURE_FILE
|
||
|
|
check_err $? "Sampled packets do not have expected out-tc (7)"
|
||
|
|
|
||
|
|
log_test "tc sample out-tc"
|
||
|
|
|
||
|
|
tc qdisc del dev $rp2 root handle 1:
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_md_out_tc_occ_test()
|
||
|
|
{
|
||
|
|
local backlog pct occ
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
# Output traffic class occupancy is not supported on Spectrum-1.
|
||
|
|
mlxsw_only_on_spectrum 2+ || return
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 1024 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
# Configure a shaper on egress to create congestion.
|
||
|
|
tc qdisc replace dev $rp2 root handle 1: \
|
||
|
|
tbf rate 1Mbit burst 256k limit 1M
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \
|
||
|
|
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q &
|
||
|
|
|
||
|
|
# Allow congestion to reach steady state.
|
||
|
|
sleep 10
|
||
|
|
|
||
|
|
backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]')
|
||
|
|
|
||
|
|
# Kill mausezahn.
|
||
|
|
{ kill %% && wait %%; } 2>/dev/null
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
# Record last congestion sample.
|
||
|
|
occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \
|
||
|
|
cut -d ' ' -f 16)
|
||
|
|
|
||
|
|
pct=$((100 * (occ - backlog) / backlog))
|
||
|
|
(( -1 <= pct && pct <= 1))
|
||
|
|
check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%"
|
||
|
|
|
||
|
|
log_test "tc sample out-tc-occ"
|
||
|
|
|
||
|
|
tc qdisc del dev $rp2 root handle 1:
|
||
|
|
tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_md_latency_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
# Egress sampling not supported on Spectrum-1.
|
||
|
|
mlxsw_only_on_spectrum 2+ || return
|
||
|
|
|
||
|
|
tc filter add dev $rp2 egress protocol all pref 1 handle 101 matchall \
|
||
|
|
skip_sw action sample rate 5 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
|
||
|
|
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
grep -q -e "latency " $CAPTURE_FILE
|
||
|
|
check_err $? "Sampled packets do not have latency attribute"
|
||
|
|
|
||
|
|
log_test "tc sample latency"
|
||
|
|
|
||
|
|
tc filter del dev $rp2 egress protocol all pref 1 handle 101 matchall
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_acl_group_conflict_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
# Test that two flower sampling rules cannot be configured on the same
|
||
|
|
# port with different groups.
|
||
|
|
|
||
|
|
# Policy-based sampling is not supported on Spectrum-1.
|
||
|
|
mlxsw_only_on_spectrum 2+ || return
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
|
||
|
|
skip_sw action sample rate 1024 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol ip pref 2 handle 102 flower \
|
||
|
|
skip_sw action sample rate 1024 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule with same group"
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol ip pref 3 handle 103 flower \
|
||
|
|
skip_sw action sample rate 1024 group 2 &> /dev/null
|
||
|
|
check_fail $? "Managed to configure sampling rule with conflicting group"
|
||
|
|
|
||
|
|
log_test "tc sample (w/ flower) group conflict test"
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol ip pref 2 handle 102 flower
|
||
|
|
tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
|
||
|
|
}
|
||
|
|
|
||
|
|
__tc_sample_acl_rate_test()
|
||
|
|
{
|
||
|
|
local bind=$1; shift
|
||
|
|
local port=$1; shift
|
||
|
|
local pkts pct
|
||
|
|
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
# Policy-based sampling is not supported on Spectrum-1.
|
||
|
|
mlxsw_only_on_spectrum 2+ || return
|
||
|
|
|
||
|
|
tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \
|
||
|
|
skip_sw dst_ip 198.51.100.1 action sample rate 32 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \
|
||
|
|
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
|
||
|
|
pct=$((100 * (pkts - 10000) / 10000))
|
||
|
|
(( -25 <= pct && pct <= 25))
|
||
|
|
check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
|
||
|
|
|
||
|
|
# Setup a filter that should not match any packet and make sure packets
|
||
|
|
# are not sampled.
|
||
|
|
tc filter del dev $port $bind protocol ip pref 1 handle 101 flower
|
||
|
|
|
||
|
|
tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \
|
||
|
|
skip_sw dst_ip 198.51.100.10 action sample rate 32 group 1
|
||
|
|
check_err $? "Failed to configure sampling rule"
|
||
|
|
|
||
|
|
psample_capture_start
|
||
|
|
|
||
|
|
ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
|
||
|
|
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
|
||
|
|
|
||
|
|
psample_capture_stop
|
||
|
|
|
||
|
|
grep -q -e "group 1 " $CAPTURE_FILE
|
||
|
|
check_fail $? "Sampled packets when should not"
|
||
|
|
|
||
|
|
log_test "tc sample (w/ flower) rate ($bind)"
|
||
|
|
|
||
|
|
tc filter del dev $port $bind protocol ip pref 1 handle 101 flower
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_acl_rate_test()
|
||
|
|
{
|
||
|
|
__tc_sample_acl_rate_test ingress $rp1
|
||
|
|
__tc_sample_acl_rate_test egress $rp2
|
||
|
|
}
|
||
|
|
|
||
|
|
tc_sample_acl_max_rate_test()
|
||
|
|
{
|
||
|
|
RET=0
|
||
|
|
|
||
|
|
# Policy-based sampling is not supported on Spectrum-1.
|
||
|
|
mlxsw_only_on_spectrum 2+ || return
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
|
||
|
|
skip_sw action sample rate $((2 ** 24 - 1)) group 1
|
||
|
|
check_err $? "Failed to configure sampling rule with max rate"
|
||
|
|
|
||
|
|
tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
|
||
|
|
|
||
|
|
tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
|
||
|
|
skip_sw action sample rate $((2 ** 24)) \
|
||
|
|
group 1 &> /dev/null
|
||
|
|
check_fail $? "Managed to configure sampling rate above maximum"
|
||
|
|
|
||
|
|
log_test "tc sample (w/ flower) maximum rate"
|
||
|
|
}
|
||
|
|
|
||
|
|
trap cleanup EXIT
|
||
|
|
|
||
|
|
setup_prepare
|
||
|
|
setup_wait
|
||
|
|
|
||
|
|
tests_run
|
||
|
|
|
||
|
|
exit $EXIT_STATUS
|